Eurolite FD-32+1 DMX Dimmer Panel User Manual

1. Uvod

Thank you for choosing the Eurolite FD-32+1 DMX Dimmer Panel. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions carefully before initial use and keep them for future reference. This device is designed for professional stage and show applications, offering precise DMX control over lighting fixtures.

2. Sigurnosne upute

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili strujni udar, požar ili oštećenje uređaja.

• Električna sigurnost: Ensure the power supply matches the device's requirements (9V - 12V / 300 mA DC). Disconnect power before cleaning or servicing.
• Okruženje: Do not expose the device to rain, moisture, or extreme temperatures. Operate in a dry, well-ventilated area.
• Rukovanje: Avoid strong impacts or dropping the device. Do not open the housing or attempt repairs yourself; refer servicing to qualified personnel.
• Ventilacija: Ensure proper airflow around the unit to prevent overheating. Do not block ventilation openings.

3. Proizvod je gotovview

The Eurolite FD-32+1 DMX Dimmer Panel is a compact DMX controller designed for precise control of lighting effects. It features multiple faders for individual channel control and a master fader for overall intensity adjustment.

3.1 Kontrole prednje ploče

Slika 1: Ispred view of the Eurolite FD-32+1 DMX Dimmer Panel. This image displays the eight individual channel faders, the master fader on the right, and the 'PAGE SELECT' button with its corresponding indicator LEDs (A, B, C, D).

Prednja ploča uključuje:

• Channel Faders (1-8): Control the intensity of individual DMX channels. Each fader is labeled with its corresponding channel range (e.g., CH 1/9/17/25).
• Master Fader: Controls the overall output intensity of all active channels.
• PAGE SELECT Button: Cycles through four pages (A, B, C, D) to access a total of 32 DMX channels (8 channels x 4 pages).
• Page Indicator LEDs (A, B, C, D): Indicate the currently selected page.

3.2 Veze na stražnjoj ploči

Slika 2: Stražnji view of the Eurolite FD-32+1 DMX Dimmer Panel. This image shows the power input (DC INPUT), DMX OUT connector, and the main power switch.

The rear panel provides the necessary connections:

• DC INPUT (9V - 12V / 300 mA DC): Power input connector for the external power adapter.
• DMX IZLAZ: 3-pin XLR connector for sending DMX signals to compatible lighting fixtures.
• Prekidač za napajanje: Glavni prekidač za uključivanje/isključivanje uređaja.

4. Postavljanje

Follow these steps to set up your DMX Dimmer Panel:

1. Raspakiranje: Carefully remove the device from its packaging. Inspect for any signs of damage during transit.
2. Plasman: Place the dimmer panel on a stable, flat surface, such as a table (Bordsmontering). Ensure adequate ventilation around the unit.
3. Priključak za napajanje: Spojite priloženi adapter za napajanje na DC ULAZ on the rear panel. Plug the adapter into a suitable power outlet.
4. DMX veza: Connect a 3-pin DMX cable from the DMX IZLAZ connector on the dimmer panel to the DMX IN of your first DMX-compatible lighting fixture. Daisy-chain additional fixtures as required.
5. Uključivanje: Okrenite VLAST switch on the rear panel to the 'ON' position. The unit should power up.

5. Upute za rad

This section details how to operate your Eurolite FD-32+1 DMX Dimmer Panel.

5.1 Osnovni rad

1. Uključivanje: Ensure the unit is powered on using the switch on the rear panel.
2. Odaberite stranicu: Pritisnite tipku ODABIR STRANICE button to cycle through pages A, B, C, and D. The corresponding LED will illuminate to indicate the active page. Each page controls a different set of 8 DMX channels. For exampono:
   • Page A: Channels 1-8
   • Page B: Channels 9-16
   • Page C: Channels 17-24
   • Page D: Channels 25-32
3. Adjust Channel Intensity: Move the individual channel faders (1-8) up or down to control the intensity of the assigned DMX channels on the selected page. Moving a fader up increases intensity, while moving it down decreases intensity.
4. Adjust Master Intensity: Koristite MAJSTORSKI fader to control the overall output intensity of all active channels on the currently selected page. This acts as a global dimmer for the page.

5.2 DMX adresiranje

The FD-32+1 sends DMX signals starting from channel 1. Ensure your DMX lighting fixtures are addressed correctly to respond to the channels controlled by the dimmer panel. For example, if a fixture is set to DMX address 1, it will respond to fader 1 on Page A. If a fixture is set to DMX address 9, it will respond to fader 1 on Page B.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your device.

• Čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili otapala.
• Zamjena osigurača: If the unit does not power on, check the fuse located near the power input on the rear panel. Replace it with a fuse of the exact same type and rating. Refer to the specifications for fuse details.
• Skladištenje: When not in use for extended periods, store the device in a dry, dust-free environment, preferably in its original packaging.

7. Rješavanje problema

If you encounter issues, refer to the following troubleshooting guide:

8. Specifikacije

• Marka: Eurolite
• Model: 70063830 (FD-32+1 DMX Dimmer Panel)
• Vrsta montaže: Montaža na stol
• Težina artikla: 1250 gram
• Ulazna snaga: 9V - 12V DC, 300 mA
• DMX kanali: 32 (8 faders x 4 pages)
• DMX izlaz: 3-pinski XLR

9. Jamstvo i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized Eurolite dealer. Keep your proof of purchase for any warranty claims.