Waytronic Powersound V1 PIR senzor pokreta s glasovnim programabilnim zvučnikom. Korisnički priručnik.

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker. Please read this manual thoroughly before using the device to ensure proper function and safety.

Sigurnosne informacije

• Ensure the power supply matches the device's requirements (DC12V).
• Ovaj uređaj je nije vodootporan. Avoid exposure to rain, moisture, or any liquids.
• Ne pokušavajte sami rastavljati ili popravljati uređaj. Sve servisne radove prepustite kvalificiranom osoblju.
• Držite uređaj podalje od ekstremnih temperatura i izravne sunčeve svjetlosti.
• Install the device securely to prevent it from falling.

Proizvod gotovview

The Waytronic Powersound V1 is a wall-mountable PIR motion sensor speaker designed to play custom audio files upon motion detection. It features a sensitive sensor, a built-in 10W loudspeaker, and supports audio file updates via USB or SD card.

Figure 1: Waytronic Powersound V1 PIR Motion Sensor Speaker with included power adapter.

Komponente i značajke:

• PIR senzora pokreta: Detects movement within approximately 16 feet (5 meters) and triggers audio playback.
• Ugrađeni zvučnik: 10W loudspeaker for clear audio output.
• USB sučelje: For connecting a USB flash drive to transfer audio files.
• Utor za SD karticu: For inserting an SD card (max 2GB) to play audio directly or transfer files.
• Kontrole glasnoće: Buttons for adjusting playback volume.
• Načini reprodukcije: Supports single cycle or sequential playback of audio files.

Slika 2: Bočna strana view of the device showing the Infrared Indicator Light, SD card slot, USB interface, and control buttons (Previous/A, Next/B, Volume+/C, Volume-/L).

Postavljanje

1. Montaža uređaja

• The Powersound V1 is designed for wall mounting.
• Choose a location where the motion sensor has an unobstructed view željenog područja detekcije.
• Consider installing it on the top of a wall or discreetly behind an object like a tree in a covered outdoor area, ensuring it is protected from moisture.
• Secure the device using appropriate mounting hardware (not included).

2. Priključak za napajanje

• Connect the provided DC12V power adapter to the device's power input port.
• Plug the power adapter into a standard electrical outlet. The device will power on automatically.

3. Customizing Audio Files

The device supports MP3 audio files. You can update audio files using either a USB flash drive or an SD card.

Figure 3: Close-up of the USB port and SD card slot for audio file upravljanje.

Using a USB Flash Drive:

1. Format your USB flash drive to FAT32. (Note: NTFS format may cause transfer issues).
2. Copy your desired MP3 audio files u korijenski direktorij USB flash pogona.
3. Insert the USB flash drive into the USB interface on the device.
4. Pritisnite i držite V+/C button. The device should automatically begin copying files to its internal memory. The red indicator light may blink during this process.
5. Once the transfer is complete, remove the USB flash drive.

Using an SD Card:

1. Copy your desired MP3 audio files to a standard SD card (maximum 2GB).
2. Insert the SD card into the SD card slot on the device.
3. The device can play audio files directly from the SD card.

Upute za rad

1. Motion Detection and Playback

• Once powered on and with audio files loaded, the device will enter standby mode.
• When the PIR motion sensor detects movement within its range (approximately 16 feet), it will trigger the playback of the stored audio files.
• The audio can be heard up to 100 feet (30 meters) away.

Figure 4: Illustration of the motion sensor detecting movement and triggering sound playback.

2. Načini reprodukcije

The device supports two main playback modes:

• Single Cycle Playback: Plays one audio file and then stops until motion is detected again.
• Order Playback (Sequential): Reproducira zvuk files in sequence. After playing the last file, it will loop back to the first.

Specific instructions for switching between these modes are typically found in the device's internal programming or may be controlled by the order of files on the SD card/USB drive. Refer to the manufacturer's specific guidance if available.

3. Podešavanje glasnoće

• Koristite V+/C gumb za povećanje glasnoće.
• Koristite V-/L gumb za smanjenje glasnoće.
• The device offers multiple volume levels.

Održavanje

• Čišćenje: Obrišite uređaj mekom, suhom krpom. Nemojte koristiti tekuća sredstva za čišćenje ili abrazivne materijale.
• Skladištenje: Kada se uređaj ne koristi dulje vrijeme, isključite adapter za napajanje i pohranite ga na hladnom i suhom mjestu.
• Zaštita okoliša: As the device is not waterproof, ensure it is always protected from rain and high humidity, especially if used in outdoor settings.

Rješavanje problema

Tehnički podaci

Jamstvo i podrška

Informacije o jamstvu

The Waytronic Powersound V1 comes with a Potpuna garancija. For specific terms and conditions, please refer to the warranty card included with your product or contact Waytronic customer service.

Korisnička podrška

If you encounter any issues or have questions not covered in this manual, please contact Waytronic customer service. You can often find contact information on the product packaging, the official Waytronic webweb-mjestu ili putem vaše platforme za kupnju.

When contacting support, please have your product model (Powersound V1) and purchase details ready.