Olide ADA Swing Door Operator Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Olide ADA Swing Door Operator, Model Olide120B KIT2. This system is designed to provide automated door access, particularly beneficial for individuals with disabilities or the elderly, ensuring ease of use and accessibility.

The Olide120B is an automatic ADA swing door opener that can be activated by various methods, including passive infrared sensors, remote controls, or push buttons. It supports both automatic and manual operation modes. In manual mode, the door opens with minimal pressure and closes slowly, facilitating smooth passage.

Figure 1: The Olide ADA Swing Door Operator enhances accessibility for individuals in wheelchairs.

2. Sigurnosne informacije

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all power is disconnected before performing any installation, maintenance, or troubleshooting.
• Installation and adjustment must be carried out according to the provided instructions.
• Ne rastavljajte uređaj. Servisiranje prepustite kvalificiranom osoblju.
• Keep hands and objects clear of the door's path during automatic operation.
• Redovito provjeravajte ima li na sustavu znakova istrošenosti ili oštećenja.

3. Sadržaj paketa

The Olide ADA Swing Door Operator KIT2 typically includes the following components:

Slika 2: Gotovoview of components included in the Olide ADA Swing Door Operator KIT2.

• Olide Automatic Swing Door Operator Unit
• Sklop okretne ruke
• Kabel za napajanje
• Hand Programmer
• Daljinski upravljači (2 jedinice)
• Allen Wrenches (for adjustment)
• "Press to Open" Push Buttons (2 units)
• Wireless Receiver for Push Buttons
• "Automatic Caution Door" Sign
• Vijci i pribor za montažu

4. Značajke proizvoda

The Olide ADA Swing Door Operator offers several key features for enhanced accessibility and convenience:

• Funkcija "push&go": Allows manual initiation of door opening with a gentle push, with adjustable force settings.
• Easy Parameter Adjustment: All operational parameters can be easily configured using the included hand programmer.
• Wide Voltage Tehnologija: Compatible with input voltages from AC 100V to AC 240V, ensuring stable operation across various power supplies.
• Integracija sustava: The operator can be integrated with security systems, card readers, and other access control devices.
• Detekcija prepreka: Automatically re-opens the door if an object is detected in its closing path, enhancing safety.
• Usklađenost s ADA: Designed to meet ADA specifications for accessible door systems.

5. Postavljanje i instalacija

Proper installation is crucial for the safe and efficient operation of the door opener. It is recommended that installation be performed by qualified personnel.

5.1 Mounting the Operator Unit

The main operator unit should be securely mounted above the door frame. Ensure the mounting surface is stable and capable of supporting the unit's weight. The unit's dimensions are approximately 545mm (21.45 inches) in length, 85mm (3.35 inches) in height, and 95mm (3.74 inches) in depth.

Figure 3: Dimensions of the main operator unit.

5.2 Arm Assembly and Door Swing Configuration

Attach the swing arm assembly to the operator unit and the door. The system supports both outswing (pull open) and inswing (push open) configurations. Select the appropriate arm setup based on your door's opening direction.

Figure 4: Door swing configurations: Outswing Pull Open (left) and Inswing Push Open (right).

5.3 Wiring and Sensor Connection

Connect the power cable to the operator unit and a suitable power source (AC 100-240V). Connect the wireless receiver for the push buttons and any other sensors (e.g., passive infrared sensors) to the control board as per the wiring diagram provided in the detailed installation guide (not included in this general manual). Ensure all connections are secure and correctly polarized.

Figure 5: "Press to Open" buttons and wireless receiver for activation.

The push buttons have dimensions of approximately 4.5 inches (L) x 4.5 inches (W) x 1.8 inches (H).

Figure 6: Dimensions of the "Press to Open" button.

6. Operacija

6.1 Automatski način rada

In automatic mode, the door will open when activated by a connected sensor (e.g., passive infrared sensor, push button, or remote control). The door will remain open for the set hold-open time and then close automatically.

6.2 Manual Mode (Push&Go)

The Push&Go function allows users to manually push the door slightly to initiate the automatic opening sequence. The required manual push force can be adjusted using the hand programmer.

6.3 Rad daljinskog upravljača

Use the provided remote controls to open and close the door. Refer to the remote control pairing instructions in the detailed guide for initial setup.

7. Parameter Adjustment with Hand Programmer

The included hand programmer allows for precise adjustment of various operational parameters. Connect the hand programmer to the designated port on the operator's control board.

Figure 7: Controller board and hand programmer interface.

Adjustable parameters typically include:

• Opening/Closing Speeds: Control how quickly the door opens and closes.
• Manually Open Force (Push&Go): Set the amount of force required to activate the Push&Go function.
• Opening Direction: Configure the door's opening direction if not set during installation.
• Hold-Open Time: Determine how long the door remains open after activation before closing.
• Other advanced settings may be available. Refer to the detailed programming guide for specific instructions on navigating the hand programmer menu.

8. Održavanje

Regular maintenance ensures the longevity and reliable operation of your Olide ADA Swing Door Operator.

• Mjesečno: Inspect the door and operator for any unusual noises, vibrations, or signs of wear. Check that all mounting screws are tight.
• Tromjesečno: Clean the operator unit and sensors to remove dust and debris. Verify that the door opens and closes smoothly without obstruction. Test the safety features, such as obstacle detection.
• Godišnje: Have the system inspected by a qualified technician to ensure all components are functioning correctly and to perform any necessary adjustments or lubrication.

9. Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti. Za složenije probleme obratite se korisničkoj podršci.

10. Specifikacije

11. Jamstvo i podrška

Olide products are designed for durability and reliability. The Olide ADA Swing Door Operator comes with a 60-mjesečno jamstvo na proizvod.

Figure 8: Olide offers a 60-month product warranty.

For technical support, warranty claims, or further assistance, please contact Olide customer service through their official channels. Please have your model number (Olide120B) and purchase details ready when contacting support.