Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. Proizvod je gotovview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

Ključne karakteristike:

• Bežična Bluetooth tehnologija: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Širok raspon mjerenja temperature: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• Kompatibilnost mobilne aplikacije: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• Automatska sinkronizacija podataka: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

Slika 1: Prednja strana view of the LogEt 8 BLE data logger with labeled components.

2. Sadržaj paketa

Prilikom raspakiranja provjerite jesu li svi artikli prisutni u paketu:

• 1 x LogEt 8 BLE Data Logger
• 1 x korisnički priručnik
• 1 x kalibracijski certifikat

Figure 2: Contents included in the LogEt 8 BLE package.

3. Komponente uređaja

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• USB priključak: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• LCD zaslon: Displays current temperature, alarm status, recording status, and battery level.
• Gumb START: Initiates data recording.
• Gumb STOP: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. Postavljanje

4.1 Početno postavljanje

1. Raspakirajte uređaj: Carefully remove the LogEt 8 BLE from its packaging.
2. Provjerite ima li oštećenja: Check the device for any visible damage. If damaged, contact customer support.
3. Aktivacija baterije: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• Tražiti "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• Napravite račun ili se prijavite ako ga već imate.

4.3 Povezivanje putem Bluetootha

Once the app is installed:

1. Provjerite je li Bluetooth omogućen na vašem mobilnom uređaju.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. Upute za rad

5.1 Početak snimanja

To begin data logging:

• Pritisnite i držite START button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 Zaustavljanje snimanja

To end data logging:

• Pritisnite i držite STOP button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Preuzimanje podataka i generiranje izvješća

After recording, data can be retrieved and analyzed:

• Preko USB -a: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. ove files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. Održavanje

6.1 Podaci o bateriji

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 Čišćenje

Za čišćenje uređaja:

• Obrišite vanjštinu mekom, suhom krpom.
• Ne koristite abrazivna sredstva za čišćenje, otapala niti uranjajte uređaj u vodu.

6.3 Skladištenje

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Rješavanje problema

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• Uređaj se ne uključuje: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• Nije moguće povezivanje putem Bluetootha: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• Nema zabilježenih podataka: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• Netočna očitanja: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

Za dodatnu pomoć obratite se korisničkoj podršci tvrtke Elitech.

8. Specifikacije

9. Jamstvo i podrška

9.1 Informacije o jamstvu

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 Korisnička podrška

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Webstranica: Posjetiti www.elitechus.com za često postavljana pitanja, preuzimanje softvera i kontaktne podatke.
• E-pošta/Telefon: Refer to the Elitech webNajnovije kontaktne podatke potražite na web-mjestu ili na pakiranju proizvoda.