Janome IT 1028 Glamour Sewing Machine User Manual

Uvod

Welcome to the world of sewing with your new Janome IT 1028 Glamour mechanical sewing machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your machine. Please read it thoroughly before using the machine to ensure optimal performance and longevity.

The Janome IT 1028 Glamour is designed for ease of use, featuring 12 stitch types, a free arm for circular sewing, an oscillating hook, automatic buttonholes, and adjustable stitch length and width. It also includes a double presser foot lift, feed dog lowering, a thread cutter, a needle threader, and a soft cover for protection.

Sigurnosne upute

Kako biste smanjili rizik od električnog udara, opeklina, požara ili ozljeda osoba:

• Uvijek isključite uređaj iz električne utičnice odmah nakon upotrebe i prije čišćenja, skidanja poklopaca ili bilo kakvih korisničkih podešavanja.
• Do not allow the machine to be used as a toy. Close attention is necessary when the machine is used by or near children.
• Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
• Nikada ne koristite ovaj uređaj ako je oštećen kabel ili utikač, ako ne radi ispravno, ako je pao ili je oštećen ili je pao u vodu.
• Nikada nemojte ispuštati ili stavljati bilo koji predmet u bilo koji otvor.
• Ne koristiti na otvorenom.
• Nemojte raditi tamo gdje se koriste proizvodi u obliku aerosola (sprejeva) ili gdje se daje kisik.
• Držite prste podalje od svih pokretnih dijelova. Potrebna je posebna briga oko igle šivaćeg stroja.
• Uvijek koristite odgovarajuću ploču s iglama. Pogrešna ploča može uzrokovati lomljenje igle.
• Nemojte koristiti savijene igle.
• Ne povlačite niti gurajte tkaninu tijekom šivanja. To može skrenuti iglu i uzrokovati njezino lomljenje.
• Isključite šivaći stroj kada vršite bilo kakva podešavanja u području igle, kao što je uvlačenje konca u iglu, promjena igle, uvlačenje konca u špulicu ili promjena pritisne stopice.
• Always unplug the machine when removing the light bulb.
• Ne isključujte utikač povlačenjem za kabel. Za isključivanje, uhvatite utikač, a ne kabel.

Proizvod gotovview

Ključne značajke

• 12 vrsta šavova: Versatile options for various sewing projects.
• Slobodna ruka: Facilitates sewing cuffs, sleeves, and other small, circular items.
• Oscillating Hook: Ensures smooth and consistent stitch formation.
• Podesiva duljina i širina boda: Provides control over stitch appearance.
• Automatic Four-Step Buttonhole: Pojednostavljuje izradu profesionalnih rupica za gumbe.
• Dvostruko podizanje pritisne stopice: Allows for sewing thicker fabrics.
• Feed Dog Lowering: Useful for darning and free-motion quilting.
• Rezač konca: Conveniently trims threads.
• Uvlačilac konca u iglu: Assists in quickly threading the needle.
• Meki uvez: Protects the machine from dust and damage.

Strojne komponente

Familiarize yourself with the main parts of your Janome IT 1028 Glamour sewing machine.

Slika 1: Prednja strana view of the Janome IT 1028 Glamour sewing machine with the soft cover in place. This image shows the overall design and the stitch selection and length dials.

Slika 2: Krupni plan view of the stitch selector dial (left) and stitch length dial (right) on the Janome IT 1028 Glamour. The decorative illustration on the machine body is also visible.

Figure 3: The Janome IT 1028 Glamour sewing machine with the accessory tray removed, revealing the free arm and the bobbin case area. This view is essential for bobbin insertion and cleaning.

Postavljanje

1. Raspakiranje i postavljanje

• Pažljivo izvadite stroj iz ambalaže.
• Postavite stroj na stabilnu, ravnu površinu.
• Remove any protective films or packing materials.

2. Priključak za napajanje

• Provjerite je li prekidač za napajanje stroja u položaju "ISKLJUČENO".
• Connect the power cord to the machine's power input jack.
• Uključite kabel za napajanje u odgovarajuću električnu utičnicu.

3. Namotavanje špulice

• Stavite kalem konca na iglu za kalem.
• Provucite konac kroz gornju vodilicu konca i oko diska za napinjanje špulice.
• Umetnite konac kroz rupu u špulici iznutra prema van.
• Stavite špulicu na vreteno namotača špulice i pomaknite vreteno udesno.
• Start the machine. The bobbin will wind automatically. Stop when the bobbin is full.
• Cut the thread and push the bobbin winder spindle to the left. Remove the bobbin.

4. Umetanje špulice

• Isključite stroj.
• Open the bobbin cover plate located on the free arm.
• Insert the bobbin into the bobbin case with the thread running in the direction indicated by the arrows.
• Pull the thread through the tension spring and into the guide slot.
• Zatvorite pokrovnu ploču špulice.

5. Uvlačenje gornjeg konca

• Podignite podizač stopice.
• Stavite kalem konca na iglu za kalem.
• Provucite konac kroz gornju vodilicu konca.
• Bring the thread down the right channel, up the left channel, and through the take-up lever from right to left.
• Nastavite voditi konac prema dolje do vodilice konca na iglovodu.
• Use the built-in needle threader or manually thread the needle from front to back.
• Provucite oko 6 centimetara konca kroz ušicu igle.

6. Izvlačenje konca špulice

• Lagano držite gornji konac lijevom rukom.
• Okrenite ručni kotač prema sebi kako biste spustili iglu u ploču igle, a zatim je podignite.
• The upper thread will catch the bobbin thread, forming a loop.
• Pull the loop to bring the bobbin thread up through the needle plate hole.
• Povucite oba konca (gornji i špulicu) ispod pritisne stopice i prema stražnjoj strani stroja.

Upute za rad

1. Odabir šava

Okrenite Brojčanik za odabir šavova (refer to Figure 2) to choose your desired stitch pattern. The available stitches are indicated by letters or symbols on the dial.

2. Podešavanje duljine i širine boda

• Duljina boda: Koristite Brojač duljine boda (refer to Figure 2) to adjust the length of your stitches. Higher numbers indicate longer stitches.
• Širina šava: For stitches that allow width adjustment, use the corresponding dial or setting. (Note: The Janome IT 1028 Glamour has adjustable stitch width, typically integrated with the stitch selector or a separate dial. Consult the machine's markings for specific controls.)

3. Osnove šivanja

• Postavite tkaninu ispod stopice.
• Spustite podizač stopice.
• Uključite stroj.
• Gently press the foot controller to start sewing. The harder you press, the faster the machine will sew.
• Guide the fabric gently with your hands, but do not pull or push forcefully.
• To secure the beginning and end of a seam, use the reverse lever to sew a few stitches backward.
• When finished, raise the needle to its highest position, lift the presser foot, and pull the fabric away from the machine.
• Use the built-in thread cutter or scissors to trim the threads.

4. Korištenje slobodne ruke

To use the free arm, simply slide off the accessory tray (refer to Figure 3). This exposes the narrow free arm, ideal for sewing small, tubular items like sleeves, pant hems, and cuffs.

5. Automatic Four-Step Buttonholes

The Janome IT 1028 Glamour features an automatic four-step buttonhole function. Refer to the stitch selector dial for the buttonhole settings (usually marked with a buttonhole symbol and steps 1-4).

• Pričvrstite nožicu za rupice.
• Označite položaj rupice za gumbe na tkanini.
• Set the stitch selector to the first buttonhole step.
• Sašijte prvu stranu rupice za gumbe.
• Change the stitch selector to the next step and sew the bar tack.
• Continue through all four steps, following the machine's markings for each segment of the buttonhole.
• Carefully cut open the buttonhole using a seam ripper, ensuring not to cut the stitches.

Održavanje

1. Čišćenje stroja

Redovito čišćenje pomaže u održavanju performansi vašeg uređaja. Uvijek isključite uređaj iz struje prije čišćenja.

• Područje kalema: Remove the needle plate and bobbin case. Use a small brush to remove lint and dust from the bobbin area and feed dogs.
• Vanjski: Obrišite vanjske površine mekom, suhom krpom. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.

2. Zamjena igle

Replace the needle regularly (after 8-10 hours of sewing) or if it becomes bent, dull, or damaged. A damaged needle can cause skipped stitches or fabric damage.

• Isključite stroj i izvucite ga iz struje.
• Otpustite iglu clamp vijak.
• Uklonite staru iglu.
• Umetnite novu iglu s ravnom stranom okrenutom prema stražnjoj strani stroja, gurajući je prema gore do kraja.
• Zategnite iglu klamp čvrsto zavrnite.

Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti. Za probleme koji nisu ovdje navedeni, obratite se korisničkoj podršci.

Tehnički podaci

• Broj modela: 8100000017663 (IT 1028 Glamour)
• Marka: JANOME
• Materijal: Plastični
• Težina: 8 kilogram
• Dimensions (P x L x H): 10 cm x 35 cm x 25 cm (Depth x Width x Height)
• Izvor napajanja: Električni kabel
• Vrste šavova: 12
• Vrsta kuke: oscilirajući
• Vrsta rupice za gumbe: Automatic Four-Step

Jamstvo i podrška

For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your authorized Janome dealer or customer service center. Keep your purchase receipt as proof of purchase.