1. Gotovoview
The Hobbywing QUICRUN WP 1080 is a waterproof electronic speed controller (ESC) designed for brushed motors in 1:10 scale RC cars, particularly rock crawlers and scale trucks. It features an aluminum case for enhanced cooling and is fully waterproof for use in various weather conditions. The ESC offers 15 programmable parameters, including PWM frequency and drag brake performance, which can be adjusted using the included LED program box.
Ključne značajke uključuju:
- 100% Waterproof design.
- 15 Programmable Parameter Items for fine-tuning.
- Factory-installed XT60 Plug for battery connection.
- Automatic Throttle Calibration for ease of use.
- Powerful BEC with selectable 6V / 7.4V output at 3A.
- Supports 2-3S LiPo or 5-9S NiMh batteries.
- Included LED Program Box for convenient parameter adjustment.
Slika 1.1: The Hobbywing QUICRUN WP 1080 ESC, LED Program Box, and an example motor. The image displays the main components of the system, including the red-finned ESC unit, the black LED program card with display and buttons, an example motor (note: this ESC is designed for brushed motors), and various connecting wires and accessories.
2. Postavljanje i instalacija
Follow these steps for proper installation and initial setup of your QUICRUN WP 1080 ESC.
2.1. Što je u kutiji
- QUICRUN WP 1080 Speed Controller
- LED Programming Card
- Priručnik s uputama
- Žičane vezice
- Double-sided Foam Tape
- Termoskupljajuće cijevi
- List naljepnica
2.2. Spajanje ožičenja
- Priključak motora: Connect the ESC's motor wires to your brushed motor. The motor wires come tinned without connectors, allowing for direct soldering or custom connector installation. Ensure correct polarity if your motor requires it.
- Spajanje baterije: The ESC features a factory-installed XT60 plug. Connect your compatible 2-3S LiPo or 5-9S NiMh battery to this plug.
- Veza s prijemnikom: Plug the ESC's signal cable (usually black, red, white/orange) into the throttle channel (CH2) of your RC receiver.
- Prekidač za napajanje: Mount the power switch in an accessible location on your vehicle using the provided double-sided foam tape.
2.3. Montiranje ESC-a
Use the included double-sided foam tape to securely mount the ESC to a flat surface on your RC vehicle chassis. Ensure adequate airflow around the ESC for optimal cooling, especially during demanding operation.
2.4. Automatic Throttle Calibration
Before first use, or after changing your radio system, perform an automatic throttle calibration:
- Turn on your transmitter and ensure the throttle trim is at neutral and throttle endpoints are at 100%.
- Spojite bateriju na ESC.
- Press and hold the ESC's power button, then release it when the LED flashes.
- Set the throttle stick to the full throttle position and wait for the LED to flash.
- Set the throttle stick to the full brake/reverse position and wait for the LED to flash.
- Return the throttle stick to the neutral position. The ESC will emit a series of beeps, indicating successful calibration.
3. Upute za rad
This section details how to operate your ESC and adjust its parameters using the LED Program Box.
3.1. Osnovni rad
- Uključivanje: Ensure all connections are secure. Turn on your transmitter, then press the power button on the ESC.
- Isključivanje: Press and hold the power button on the ESC until it turns off. Always disconnect the battery after use.
- Vožnja: Use your transmitter's throttle stick to control the speed and direction of your RC vehicle.
3.2. Using the LED Program Box
The included LED Program Box allows for easy adjustment of the ESC's 15 programmable parameters. Connect the program box to the ESC's programming port (usually the fan port or a dedicated port, refer to the ESC manual for exact location) when the ESC is powered on and connected to a battery.
The program box will display the current parameter and its value. Use the "ITEM" button to cycle through parameters and the "VALUE" button to change the setting for the selected parameter. Press "OK" to save changes. Refer to the detailed instructions provided with the program box for a complete list of parameters and their functions.
Commonly adjusted parameters include:
- Način rada: Forward/Brake/Reverse, Forward/Brake, Forward/Reverse.
- LiPo ćelije: Auto-detect or manual setting.
- Niski volumentage Granični prag: Protects your battery from over-discharge.
- Vučna kočna sila: Controls the braking force applied when the throttle returns to neutral.
- Initial Brake Force: Sets the minimum brake force.
- Maks. Obrnuta sila: Adjusts the maximum speed in reverse.
- Način pokretanja (bušenje): Controls the initial acceleration.
- PWM frekvencija: Adjusts the motor drive frequency for smoother low-speed control and reduced motor noise. Higher frequency can increase ESC temperature.
- BEC svtage: Selectable between 6.0V and 7.4V for compatibility with various servos.
4. Održavanje
Proper maintenance ensures the longevity and optimal performance of your ESC.
- Čišćenje: Despite being waterproof, it is recommended to rinse the ESC with fresh water after use in muddy or wet conditions. Ensure it is thoroughly dried before storage or next use.
- Inspekcije: Regularly check all wires and connectors for signs of wear, damage, or corrosion. Ensure solder joints are secure.
- Skladištenje: Store the ESC in a clean, dry place away from direct sunlight and extreme temperatures.
- Praćenje temperature: While the ESC has thermal protection, monitor its temperature during operation, especially in demanding conditions or with high PWM frequency settings. Excessive heat can reduce lifespan.
5. Rješavanje problema
This section provides solutions to common issues you might encounter with your ESC.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| ESC se ne uključuje. | Battery not connected or discharged; faulty power switch; incorrect wiring. | Check battery connection and charge level. Inspect power switch and wiring for damage. |
| Motor ne reagira ili radi nepravilno. | Incorrect throttle calibration; motor wires loose or incorrectly connected; receiver signal issue. | Perform throttle calibration. Check motor wire connections. Verify receiver and transmitter are properly bound and functioning. |
| ESC se pregrijava. | Motor too large or geared too high; high PWM frequency setting; insufficient airflow. | Check motor and gearing compatibility. Reduce PWM frequency. Ensure ESC has adequate ventilation. |
| Vehicle stops suddenly (Low Voltage Cutoff). | Baterija voltage dropped below cutoff threshold. | Recharge or replace battery. Adjust Low Voltage Cutoff setting if necessary (ensure it matches your battery type). |
| Program Box does not connect or display. | Incorrect connection to ESC; ESC not powered on. | Ensure program box is connected to the correct port on the ESC. Verify ESC is powered on and connected to a battery. |
6. Specifikacije
Detailed technical specifications for the Hobbywing QUICRUN WP 1080 ESC.
| Značajka | Detalj |
|---|---|
| Model | QUICRUN WP 1080 |
| Broj dijela | 30112750 |
| Ulaz baterije | 2-3S LiPo / 5-9S NiMh |
| BEC izlaz | 6V / 7.4V @ 3A (Switch Mode) |
| Motor Limit (2S LiPo) | ≥10T |
| Motor Limit (3S LiPo) | ≥16T |
| Dimenzije (D x Š x V) | 36.5mm x 32mm x 18mm (without fan) |
| Težina | 58.5 gram |
| Vodootporan | Da |
| Programabilan | Yes, via LED Program Box (15 parameters) |
| Priključci | XT60 (Battery, pre-installed) |
| Primjena | 1:10 Scale RC Cars (Brushed) |
7. Jamstvo i podrška
Specific warranty information for the Hobbywing QUICRUN WP 1080 ESC is not explicitly provided in the product details. For detailed warranty terms and conditions, please refer to the official Hobbywing website or contact your local Hobbywing distributor.
For technical support, product inquiries, or service, please visit the official Hobbywing website or contact their customer service department. Always provide your product model number (QUICRUN WP 1080) and part number (30112750) when seeking support.
Službenik Webstranica: www.hobbywing.com