RYOBI PCL811KIT

RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT) Instruction Manual

Uvod

Thank you for choosing the RYOBI 18-Volt ONE+ Hybrid Portable Fan. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your fan. Please read it thoroughly before use and retain it for future reference.

Sigurnosne informacije

UPOZORENJE: To reduce the risk of injury, always follow basic safety precautions when using this product.

  • Čuvati izvan dohvata djece. Ovaj proizvod nije igračka.
  • Nemojte koristiti ventilator s oštećenim kabelom ili utikačem.
  • Avoid placing fingers or other objects through the fan guard.
  • Ensure the fan is placed on a stable, level surface during operation.
  • Isključite napajanje prije čišćenja ili održavanja.

Sadržaj paketa

Provjerite jesu li sve dolje navedene stavke uključene u vaš paket:

  • RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT)
  • 18-Volt Lithium-Ion Battery (P163, 2.00Ah)
  • Punjač baterija

Note: An extension cord is sold separately and is required for AC power operation. This fan is not a misting fan.

Postavljanje

1. Ugradnja baterije

  1. Ensure the fan is turned off.
  2. Locate the battery port on the base of the fan.
  3. Align the 18-Volt Lithium-Ion Battery with the battery port and slide it in until it clicks securely into place.
  4. Za uklanjanje baterije pritisnite zasune za otpuštanje sa strane baterije i izvucite je.

2. AC Power Connection (Hybrid Operation)

  1. Ensure the fan is turned off.
  2. Locate the AC power port on the fan.
  3. Insert a compatible extension cord (sold separately) into the AC power port.
  4. Plug the other end of the extension cord into a standard 120V AC outlet.
  5. The fan will automatically switch to AC power when connected, conserving battery life.
RYOBI 18-Volt ONE+ Hybrid Portable Fan with battery and charger

Image: The RYOBI 18-Volt ONE+ Hybrid Portable Fan, showing its main components including the fan unit, battery, and charger.

Upute za rad

1. Uključivanje/isključivanje i kontrola brzine

  1. To turn the fan on, rotate the variable speed dial located on the front base of the fan clockwise.
  2. Continue rotating the dial clockwise to increase the fan speed. The fan offers variable speeds up to 2100 RPM.
  3. Za smanjenje brzine ventilatora, okrenite kotačić suprotno od smjera kazaljke na satu.
  4. To turn the fan off, rotate the dial fully counter-clockwise until it clicks into the OFF position.

2. Adjusting Fan Head Angle

The fan head can be manually tilted to direct airflow as needed. Gently grasp the fan housing and adjust it to the desired angle. The fan head will hold its position once set.

Održavanje

Redovito održavanje osigurava optimalne performanse i produžuje vijek trajanja vašeg ventilatora.

  • Čišćenje: Disconnect the fan from all power sources (battery and AC cord) before cleaning. Use a soft, damp krpom obrišite vanjske površine. Ne uranjajte ventilator u vodu niti koristite abrazivna sredstva za čišćenje.
  • Skladištenje: When not in use, store the fan in a clean, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
  • Njega baterije: Always use the RYOBI-approved charger for the 18-Volt Lithium-Ion Battery. Do not expose batteries to water or extreme heat.

Rješavanje problema

ProblemMogući uzrokOtopina
Ventilator se ne uključuje.Battery is not installed correctly or is discharged. AC cord is not plugged in or power outlet is faulty.Ensure battery is fully charged and properly seated. If using AC power, check the cord connection and try a different outlet.
Nizak protok zraka.Fan speed setting is too low. Obstruction in front or behind the fan.Increase the fan speed using the variable speed dial. Clear any obstructions from the fan intake and output.
Neuobičajena buka tijekom rada.Debris caught in the fan blades. Loose components.Disconnect power and carefully inspect the fan blades for debris. Remove any foreign objects. If noise persists, contact customer support.

Tehnički podaci

ZnačajkaDetalj
MarkaRYOBI
Broj modelaPCL811KIT
Izvor napajanjaBattery Powered / AC (Hybrid)
Voltage18 volti
Posebna značajkaPortable, Hybrid
Razina buke59 decibela
Težina artikla3.5 funti
MaterijalABS plastika
Maksimalna brzina2100 okretaja u minuti
Wattage45 vata
Uključene komponenteFan, Battery, Charger

Jamstvo i podrška

This RYOBI product comes with a 30-dnevno ograničeno jamstvo from the manufacturer. For warranty claims, technical assistance, or to purchase replacement parts, please refer to the official RYOBI webweb-mjesto ili izravno kontaktirajte njihovu korisničku službu.

Molimo sačuvajte dokaz o kupnji radi potvrde jamstva.

© 2026 RYOBI. Sva prava pridržana. Informacije u ovom priručniku podložne su promjenama bez prethodne najave.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.