QFX BT-2

QFX BT-2 4-Inch Rechargeable Party Sound System User Manual

Model: BT-2

1. Uvod

Hvala na kupnjiasing the QFX BT-2 4-Inch Rechargeable Party Sound System. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions thoroughly before use and retain them for future reference.

Sigurnosne informacije

  • Ne izlažite uređaj kiši ili vlazi kako biste spriječili požar ili strujni udar.
  • Ne otvarajte casing. Unutra nema dijelova koje korisnik može sam servisirati. Za sve servisne radove obratite se kvalificiranom osoblju.
  • Držite uređaj dalje od izravne sunčeve svjetlosti, izvora topline i ekstremnih temperatura.
  • Osigurajte odgovarajuću ventilaciju oko uređaja tijekom rada.
  • Koristite samo navedeni kabel za punjenje i adapter za napajanje.

2. Sadržaj paketa

Molimo provjerite jesu li sve dolje navedene stavke prisutne u vašem paketu:

  • QFX BT-2 4-Inch Rechargeable Party Sound System
  • USB kabel za punjenje
  • korisnički priručnik

3. Proizvod je gotovview

Familiarize yourself with the components and controls of your QFX BT-2 speaker.

QFX BT-2 4-Inch Rechargeable Party Sound System, front view showing speaker grille and control panel.

Slika 1: Prednja strana view of the QFX BT-2 speaker. This image displays the speaker grille, the control panel with various buttons, and the RGB LED disco light.

Control Panel (Typical Layout)

  • Gumb za napajanje: Uključuje ili isključuje jedinicu.
  • Gumb za način rada: Switches between Bluetooth, FM Radio, USB, and MicroSD modes.
  • Gumb za reprodukciju/pauzu: Reproducira ili pauzira reprodukciju zvuka.
  • Tipka za prethodno/stišavanje zvuka: Kratki pritisak za prethodnu pjesmu/stanicu, dugi pritisak za smanjenje glasnoće.
  • Tipka za sljedeće/pojačavanje glasnoće: Kratki pritisak za sljedeću pjesmu/stanicu, dugi pritisak za povećanje glasnoće.
  • Gumb svjetlosnog načina rada: Activates or changes the RGB LED disco light patterns.
  • USB priključak: Za reprodukciju zvuka s USB flash pogona.
  • Utor za microSD karticu: For playing audio from microSD cards.
  • DC 5V priključak za punjenje: Za spajanje USB kabela za punjenje.

4. Postavljanje

4.1 Punjenje zvučnika

  1. Connect the small end of the USB charging cable to the DC 5V Charging Port on the speaker.
  2. Spojite veći kraj USB kabela za punjenje na USB adapter za napajanje (nije uključen) ili USB priključak računala.
  3. The charging indicator light will illuminate, typically red, during charging. It will turn off or change color when fully charged.
  4. Prije prve upotrebe, napunite bateriju otprilike 3-4 sata.

4.2 Uključivanje/isključivanje

  • Za uključivanje zvučnika pritisnite i držite Gumb za napajanje for a few seconds until you hear an audible prompt or see the indicator lights activate.
  • Za isključivanje zvučnika pritisnite i držite Gumb za napajanje again for a few seconds until the indicator lights turn off.

5. Upute za rad

5.1 Bluetooth uparivanje

  1. Uključite zvučnik. Automatski će ući u način rada za uparivanje putem Bluetootha, što će biti naznačeno treperenjem LED svjetla i zvučnim signalom.
  2. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to the Bluetooth settings and enable Bluetooth.
  3. Tražiti available devices. You should see "QFX BT-2" or a similar name in the list.
  4. Select "QFX BT-2" to connect. Once paired, the speaker will emit an audible confirmation, and the LED light will stop flashing.
  5. You can now play audio from your device through the QFX BT-2 speaker.

5.2 Način FM radija

  1. Pritisnite tipku Gumb za način rada repeatedly until you enter FM Radio mode. An audible prompt will confirm the mode.
  2. Za automatsko skeniranje i spremanje dostupnih FM postaja pritisnite i držite Gumb za reprodukciju/pauzu. The speaker will scan and store stations.
  3. Kada skeniranje završi, upotrijebite Prethodno i Next Buttons to navigate between saved stations.

5.3 Reprodukcija s USB-a/MicroSD kartice

  1. Insert a USB flash drive or a microSD card (with audio files in MP3 format) into the respective port/slot on the speaker.
  2. The speaker will automatically detect the storage device and switch to USB or MicroSD mode, beginning playback. If it does not switch automatically, press the Gumb za način rada za odabir ispravnog načina rada.
  3. Koristite Reprodukcija/Pauza, Prethodno, i Next Buttons za upravljanje reprodukcijom.

5.4 Uparivanje s pravim bežičnim stereo sustavom (TWS)

TWS allows two QFX BT-2 speakers to connect wirelessly and play audio simultaneously for a stereo sound experience. A second QFX BT-2 speaker is required (sold separately).

  1. Ensure both QFX BT-2 speakers are powered on and in Bluetooth mode, but not connected to any other Bluetooth device.
  2. Na jednom od zvučnika (ovo će biti primarni zvučnik) pritisnite i držite Gumb za način rada nekoliko sekundi dok ne čujete ton uparivanja.
  3. The two speakers will attempt to connect to each other. Once successfully paired, you will hear a confirmation tone.
  4. Now, connect your Bluetooth-enabled device to the primary speaker as described in section 5.1. Audio will play through both speakers in stereo.

5.5 RGB LED Disco Light

  • To activate the RGB LED disco light, press the Gumb za svjetlosni način.
  • Pritisnite tipku Gumb za svjetlosni način repeatedly to cycle through different light patterns or to turn the light off.

6. Održavanje

  • Čišćenje: Za čišćenje vanjske strane zvučnika koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili abrazivne materijale.
  • Skladištenje: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to fully charge the battery every few months to maintain its lifespan.
  • Njega baterije: To prolong battery life, avoid completely draining the battery frequently. Charge the unit when the low battery indicator appears.

7. Rješavanje problema

ProblemMogući uzrokOtopina
Zvučnik se ne uključuje.Baterija je prazna.Napunite zvučnik pomoću priloženog USB kabela.
Nije moguće uparivanje putem Bluetootha.Zvučnik nije u načinu uparivanja ili je previše udaljen od uređaja.Ensure the speaker is in Bluetooth pairing mode. Move the speaker closer to your device (within 10 meters). Ensure no other device is already connected.
Nema zvuka iz zvučnika.Volume is too low or device is paused.Increase the volume on both the speaker and your connected device. Check if playback is paused.
Prijem FM radija je slab.Slab signal ili smetnje.Premjestite zvučnik na područje s boljim prijemom. Ponovno pretražite stanice.
Reprodukcija s USB-a/MicroSD-a ne radi.Netočno file format ili oštećeni medij.Osigurajte zvuk files are in MP3 format. Try a different USB drive or microSD card.

8. Specifikacije

  • Model: BT-2
  • Marka: QFX
  • Tehnologija povezivanja: Bluetooth
  • Način audioizlaza: Stereo
  • Vrsta zvučnika: Woofer
  • Promjer subwoofera: 4 inča
  • Veličina zvučnika: 4 inča
  • Broj audio kanala: 2.0
  • Izvor napajanja: Napajanje na baterije
  • Baterija: 1 baterija specifična za proizvod (uključena)
  • Metoda kontrole: Dodir, gumb
  • Dodatne značajke: FM Radio, RGB LED Disco Light, USB Input, MicroSD Card Input, TWS (True Wireless Stereo)
  • Težina artikla: 454 gram
  • Vrsta montaže: Stolni nosač

9. Jamstvo i podrška

The QFX BT-2 4-Inch Rechargeable Party Sound System comes with a 1-godišnje ograničeno jamstvo od datuma kupnje. Ovo jamstvo pokriva proizvodne nedostatke u materijalima i izradi pri normalnoj uporabi.

For warranty claims, technical support, or further assistance, please contact QFX customer service. Please have your product model number (BT-2) and proof of purchase ready when contacting support.

Note: Specific contact details for QFX customer service are not provided in this manual. Please refer to the QFX official website or your purchase documentation for support contact information.

© 2023 QFX. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.