WITMOTION USB-UART 6-in-1 Serial Adapter (CP2102 Module) User Manual

1. Uvod

The WitMotion USB-UART 6-in-1 Multi-function Serial Adapter is a versatile device designed for various serial communication needs. It supports multiple conversion functions including USB-TTL, USB-RS232, USB-RS485, TTL-232, TTL-485, and 232-485. This adapter is built with a reliable CP2102 chipset and is compatible with a wide range of operating systems and development platforms, making it suitable for diverse projects.

2. Značajke proizvoda

• Multifunkcionalnost: Supports USB-TTL, USB-RS232, USB-RS485, TTL-232, TTL-485, and 232-485 conversions.
• Široka kompatibilnost: Compatible with Windows XP / 7 / 8 / 10 (32bit / 64bit), Linux, Wince, Mac, and Vista operating systems.
• Robustan dizajn: Features a high-quality mode switch (tested for 100,000 cycles), clear status indicator LEDs, an upgraded TO5 fuse for excellent protection against short-circuits, and an imported CP2102 chipset for stable and reliable performance.
• Adjustable Baud Rate: Supports baud rates from 300 bps to 1.5 Mbps.

3. Sadržaj paketa

Paket uključuje sljedeće stavke:

• 1x WitMotion 6-in-1 Serial Adapter
• 4x DuPont Cables
• 1x čestitka dobrodošlice

All components are securely packaged in an anti-static bag to prevent damage during transit.

Image: Packaging box and included items.

4. Proizvod je gotovview and Pinout

4.1. Adapter Layout

The images below illustrate the key components and connectors of the 6-in-1 serial adapter.

Slika: Vrh view of the adapter, highlighting the input/output connector, 485IC, and 232IC.

Slika: Donji dio view of the adapter, highlighting the USB connector, mode selection switch, resettable fuses, CP2102 IC, and LED indicators.

4.2. Opisi pinova

The following table details the function of each pin on the adapter's input/output connector:

Image: Pinout table for the serial adapter.

5. Postavljanje i instalacija

5.1. Instalacija upravljačkog programa

Before using the adapter, you must install the appropriate drivers for the CP2102 chipset on your computer. Drivers are typically available for Windows, Linux, and Mac operating systems. Please visit the official WitMotion webweb mjesto (www.wit-motion.com) for the latest drivers and installation tutorials.

1. Download the correct CP2102 driver for your operating system from the WitMotion webmjesto.
2. Slijedite upute na zaslonu za instaliranje upravljačkog programa.
3. After installation, connect the adapter to your computer's USB port. The system should recognize the device and assign a COM port.

5.2. Povezivanje s uređajem

Connect the adapter to your target device using the DuPont cables. Ensure correct pin connections based on the desired communication protocol (TTL, RS232, or RS485). Refer to the operating instructions for specific connection diagrams.

6. Upute za rad

6.1. Prekidač za odabir načina

The adapter features a mode selection switch to choose between different serial communication protocols. Carefully set the switch to the desired mode before connecting to your device.

Image: Close-up of the adapter's components, including the mode switch.

6.2. LED indikatori

The adapter is equipped with LED indicators to show its working status:

• Žuti LED: Indicates USB power/connection status.
• Green RX LED: Flashes when data is being received.
• Red TX LED: Flashes when data is being transmitted.

6.3. Veza Examples

The following diagrams illustrate common connection scenarios for various serial communication types:

Image: Detailed connection diagrams for different serial communication modes.

• USB to TTL: Connect the adapter's TX, RX, and GND pins to the corresponding RX, TX, and GND pins of your TTL device.
• USB to RS232: Use the 232T, 232R, and GND pins for RS232 communication.
• USB to RS485: Connect the A and B pins for RS485 communication.
• TTL to RS232/RS485, 232 to 485: For these conversions, ensure the adapter receives power from the USB port or an external VCC/GND pin. Connect the respective TX/RX or A/B lines between the devices. Note that for direct TTL-232/485 or 232-485 conversions, the USB connection is primarily for power, not direct data interaction with the PC.

7. Rješavanje problema

If you encounter issues while using the WitMotion 6-in-1 Serial Adapter, consider the following troubleshooting steps:

• Driver Not Recognized: Ensure the CP2102 driver is correctly installed. Try reinstalling the driver or connecting the adapter to a different USB port.
• Nema prijenosa/prijema podataka:
  • Verify that the mode selection switch is set to the correct protocol (TTL, RS232, or RS485).
  • Check all wiring connections for correctness and ensure they are secure.
  • Confirm that the baud rate settings on both the adapter and your target device match.
  • Observe the RX/TX LEDs. If they are not flashing during data transfer, there might be a connection or configuration issue.
• Problemi s napajanjem: Ensure the adapter is receiving sufficient power from the USB port. The yellow USB LED should be illuminated.
• Konfiguracija softvera: Double-check your serial terminal software or development environment settings (COM port, baud rate, data bits, parity, stop bits).

For further assistance, refer to the tutorials available on the WitMotion webweb mjesto (www.wit-motion.com) or YouTube channel (www.youtube.com/c/WITMOTION). You can also contact our support team at support@wit-motion.com.

8. Specifikacije

9. Jamstvo i podrška

WitMotion provides a 12-mjesečno jamstvo kvalitete for this product. If you have any questions or require technical assistance, please utilize the following resources:

• Online Tutorials: Comprehensive guides and video tutorials are available on our official website and YouTube channel. Links are provided on the welcome card included in your package.
  • Webstranica: www.wit-motion.com
  • YouTube: www.youtube.com/c/WITMOTION
• Podrška e-poštom: For direct technical support, please contact us at support@wit-motion.com. Our team is dedicated to providing satisfactory service and solutions.