Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Uvod

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Sigurnosne upute

• Pazite da uređaj bude postavljen na stabilnu, ravnu površinu, dalje od izravne sunčeve svjetlosti i izvora topline.
• Ne uranjajte uređaj, kabel za napajanje ili utikač u vodu ili druge tekućine.
• Držite djecu podalje od uređaja tijekom rada.
• Koristite samo pitku vodu u ledomatu.
• Isključite uređaj iz struje prije čišćenja ili kada ga ne koristite dulje vrijeme.
• Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repairs.
• Osigurajte pravilnu ventilaciju oko uređaja. Ostavite najmanje 10 cm prostora sa strane i straga.

Proizvod gotovview

Familiarize yourself with the components of your Hicon Ice Maker.

Slika 1: Raspored upravljačke ploče
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Postavljanje

Raspakivanje i postavljanje

1. Remove all packaging materials and inspect the unit for any damage.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

Dodavanje vode

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Ručna opskrba vodom: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Bilješka: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Upute za rad

1. Uključivanje: Plug the appliance into a grounded electrical outlet. Press the UKLJUČENO/ISKLJUČENO button on the control panel to start the unit.
2. Odaberite veličinu leda: Pritisnite tipku ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Proizvodnja leda: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Indikator pune leda: Kada je košara za led puna, LEDENO PUNO indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Shor vodetage Indikator: If the water reservoir is low, the ŠOR VODETAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the VODA button. The water nozzle can be extended and retracted.
7. Isključivanje: Pritisnite tipku UKLJUČENO/ISKLJUČENO gumb za isključivanje uređaja.

Bilješka: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Održavanje

Čišćenje

1. Prije čišćenja: Always unplug the ice maker from the power outlet.
2. Čišćenje interijera: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampoprano blagom otopinom deterdženta. Temeljito isperite čistom vodom.
3. Vanjsko čišćenje: Obrišite vanjsku površinu mekom,amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
4. Odvodnja: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. Preporuka za prvu upotrebu: For best taste, clean the unit thoroughly before its first use.

Skladištenje

If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.

Rješavanje problema

Tehnički podaci

• Marka: Hicon
• Model: B07S3JLSKY
• Dimenzije proizvoda (D x Š x V): 35.7 cm x 42.3 cm x 45.2 cm
• Kapacitet proizvodnje leda: Do 25 kg u 24 sata
• Kapacitet skladištenja leda: 1.2 kg
• Wattage: 160 vata
• Voltage: 220 volti
• rashladnog: R600a
• Vrsta materijala: Plastični
• UPC: 195893458158

Slika 4: Dimenzije proizvoda
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Jamstvo i podrška

The Hicon Ice Maker comes with a jednogodišnje jamstvo od datuma kupnje. Ovo jamstvo pokriva nedostatke u proizvodnji u normalnim uvjetima upotrebe.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.