Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge Instruction Manual

1. Proizvod je gotovview

The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.

Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.

2. Sigurnosne informacije

• Uvijek zatvorite glavni dovod vode prije početka bilo kakve instalacije ili održavanja.
• Nosite odgovarajuću osobnu zaštitnu opremu (OZO), kao što su zaštitne naočale i rukavice.
• Osigurajte da su svi spojevi pravilno zatvoreni kako biste spriječili curenje.
• Consult local plumbing codes and regulations for proper installation procedures.
• Ako niste sigurni u vezi bilo kojeg dijela instalacije, obratite se kvalificiranom vodoinstalateru.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
• 1x Integrated Pressure Gauge

4. Instalacija

This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.

1. Pripremite mjesto instalacije: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
2. Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
3. Connect the Regulator:
   • Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
   • Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
   • Tighten the union nuts securely, but do not overtighten.
   • Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
4. Ugradite mjerač tlaka: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
5. Restore Water Supply and Check for Leaks: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.

Slika 2: Bočna strana view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.

5. Upute za rad

The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.

1. Provjerite trenutni tlak: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
2. Podešavanje tlaka:
   • Do povećati pressure: Turn the yellow adjustment handle u smjeru kazaljke na satu.
   • Do smanjenje pressure: Turn the yellow adjustment handle u suprotnom smjeru.
   • Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
3. Potvrdite postavku: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.

Slika 3: Krupni plan view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.

6. Održavanje

The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
• Inspekcija curenja: Annually inspect the regulator and connections for any signs of leaks or corrosion.
• Čišćenje: Clean the exterior of the regulator with a damp cloth as needed. Do not use harsh chemicals.
• Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.

7. Rješavanje problema

8. Specifikacije

• Model: 69ELF114TWG
• Materijal: bronca
• Veličina ulaznog priključka: 3/4 inča
• Vrsta ulaznog priključka: Cross Linked Polyethylene (PEX-A)
• Vrsta izlaznog priključka: PEX
• Maksimalni radni tlak: 400 PSI (Inlet)
• Adjustable Pressure Range: 15 - 75 PSI (Factory-set at 50 PSI)
• Dimenzije predmeta (D x Š x V): 2.13 x 7 x 8 inča
• Težina artikla: 2.53 funti
• Certifikati: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
• Posebne karakteristike: Integrated internal bypass mechanism, Color-coded gauge

9. Jamstvo i podrška

This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.

For technical support or inquiries, please visit the official Apollo webstranici ili se obratite njihovom odjelu korisničke službe.