Uvod
This manual provides essential information for the safe and effective use of the LCFOCUS 3W Full Spectrum LED Chip. This high-power LED chip is designed for various lighting applications, particularly for plant growth, offering a full spectrum wavelength range of 400-800nm. Please read these instructions carefully before installation and operation.
Sigurnosne informacije
- Električna sigurnost: High power COB LEDs require constant current LED drivers. Ensure the power supply matches the recommended current and voltage specifications (700mA, 3.2V-3.6V DC). Incorrect power supply can damage the LED chip.
- Upravljanje toplinom: These LEDs generate heat. A heat sink system is mandatory to maintain the working temperature below 60°C (140°F). Failure to do so will significantly reduce the lifespan of the LED.
- Polaritet: Observe correct polarity when connecting the LED chip. Refer to the positive (anode +) and negative (cathode -) signs on the LEDs. Incorrect polarity will prevent the LED from lighting up and may cause damage.
- Zaštita očiju: Avoid direct exposure to the intense light emitted by the LED chip, especially the full spectrum light, as it can be harmful to the eyes.
- Rukovanje: Handle LED chips with care to avoid electrostatic discharge, which can damage the components.
Značajke proizvoda
- Full Spectrum Wavelength: 400-800nm, ideal for plant growth.
- High Color Rendering Index (CRI): 90, providing natural light rendition.
- Power: 3 Watt, Warm White (2800-3200K) output.
- High Luminous Efficacy: 84 µmol/(m²·s) PPFD at 10cm height, 4890 LX at 10cm height, 180-200LM luminous flux.
- Wide Emitting Angle: 140 degrees for broad light distribution.
- Durable Construction: Features 45mil chips, double golden wire (99.99%), and a copper holder for enhanced reliability and lifespan.
- Long Lifespan: Up to 50,000 hours with proper heat management.
Tehnički podaci
| Parametar | Vrijednost |
|---|---|
| Količina | 10 pieces / Pack |
| Marka | LCFOCUS |
| Vlast | 3 vat |
| Naziv modela | Full Spectrum-3 |
| Boja emitiranja | Topla bijela (2800-3200K) |
| Valna duljina | 400-800NM |
| Recommended Current (IF) | 700 mA |
| Naprijed Voltage (VF) | 3.2-3.6V DC |
| PPFD (Height: 10cm) | 84 µmol/(m²·s) |
| LX (Height: 10cm) | 4890 lx |
| Svjetlosni tok (Φ) | 180-200 lm |
| CRI | 90 |
| Emitting Angle | 140 stupnjeva |
| Izgradnja | Double Golden Wire (99.99%), Copper Holder |
| Životni vijek | 50,000 Hours (with proper heat sink) |
| Radna temperatura | Manje od 60 ° C (140 ° F) |
| Materijal | Bakar |
| Težina artikla | 0.2 ounces (per 10 pcs) |
| Broj dijela | LC-3FS3-P45 |
| UPC | 768894084604 |
Absolute Maximum Ratings (TA=25°C)
| Parametar | Simbol | Maksimalna ocjena | Jedinica |
|---|---|---|---|
| Kontinuirana struja naprijed | IF | 700 | mA |
| Peak Forward Current (1/10 Duty Cycle, 0.1MS Pulse Width) | IFp | 1000 | mA |
| Reverse Voltage | VR | 5 | V |
| Gubici | PD | 3 | W |
| Elektrostatičko pražnjenje | ESD | 1000 | V |
| Raspon radne temperature | TOPR | -25°C do +85°C | |
| Raspon temperature skladištenja | TSTG | -35°C do +105°C | |
| Lead Soldering Temperature (3MM from TNE Base of the Epoxy Bulb) | TSOL | 360°C |
Electrical / Optical Characteristics (TA=25°C)
| Parametar | Simbol | Min. | Tip. | Maks. | Jedinica | Ispitni uvjet |
|---|---|---|---|---|---|---|
| Naprijed Voltage | VF | 3.2 | 3.4 | 3.6 | V | AKO = 700mA |
| Svjetlosni tok | Φ | 180 | 190 | 200 | Lm | AKO = 700mA |
| Koordinate kromatičnosti | X | 0.43 | AKO = 700mA | |||
| Y | 0.40 | AKO = 700mA | ||||
| Valna duljina | WL | 400 | 800 | nm | AKO = 700mA | |
| Reverzna struja | IR | 0 | 10 | μA | VR=5V | |
| Color-Rendering Index | CRI | 90 | ||||
| Viewing kut | 2θ1/2 | 140 | Dge | AKO = 700mA | ||
| Recommend Forward Current | IF(REC) | 700 | mA |
Postavljanje
- Pripremite komponente: Gather your LCFOCUS 3W Full Spectrum LED chips, a suitable constant current LED driver (recommended 700mA output), a heat sink, thermal paste or adhesive, and appropriate wiring.
- Apply Thermal Management: Apply a thin, even layer of thermal paste or adhesive to the back of the LED chip and firmly attach it to a heat sink. Ensure good contact for efficient heat dissipation. This step is critical for the longevity of the LED.
- Odredite polaritet: Locate the positive (anode +) and negative (cathode -) markings on the LED chip. These are typically indicated on the chip's base.
- Žičani spojevi: Connect the positive terminal of the LED chip to the positive output of the constant current LED driver. Connect the negative terminal of the LED chip to the negative output of the LED driver. Ensure all connections are secure and insulated.
- Multiple Chips (Series/Parallel): If connecting multiple chips, ensure your LED driver can handle the total forward voltage and current. For series connections, sum the forward voltages. For parallel connections, sum the currents. Always use a constant current driver.
Upute za rad
Once the LED chip is properly installed with a heat sink and connected to a constant current LED driver, it is ready for operation.
- Uključivanje: Turn on the power supply to the LED driver. The LED chip should illuminate immediately.
- Monitor temperature: Periodically check the temperature of the heat sink. If it feels excessively hot to the touch, ensure proper ventilation and that the heat sink is adequately sized for the application. The working temperature should not exceed 60°C (140°F).
- Svjetlost: The full spectrum light is designed to support plant photosynthesis. Adjust the distance from the plants based on their specific light requirements and the intensity desired.
Održavanje
- Čišćenje: Ensure the LED chip and heat sink are free from dust and debris. A clean surface allows for optimal light output and heat dissipation. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Pregled hladnjaka: Regularly inspect the heat sink for any obstructions to airflow. Ensure it remains securely attached to the LED chip.
- Provjera ožičenja: Periodically check all wiring connections for signs of wear, corrosion, or looseness. Ensure insulation remains intact.
Rješavanje problema
- LED se ne pali:
- Check power supply: Ensure the constant current LED driver is receiving power and is functioning correctly.
- Check polarity: Verify that the positive and negative terminals of the LED chip are connected correctly to the driver.
- Check connections: Ensure all wires are securely connected and there are no breaks in the circuit.
- Check LED driver specifications: Confirm the driver's output current and voltage match the LED chip's requirements.
- LED Dim or Flickering:
- Insufficient current: The LED driver may not be supplying enough current.
- Overheating: Check the heat sink. If the LED is overheating, it may reduce output or flicker as a protective measure.
- Faulty connection: Inspect wiring for intermittent contact.
- Kratak vijek trajanja:
- Overheating: The most common cause. Ensure the heat sink is adequate and working temperature is maintained below 60°C.
- Prekomjerna struja/Prenapontage: Using an incorrect power supply can severely shorten the LED's life.
Jamstvo i podrška
LCFOCUS products are manufactured to high-quality standards. For specific warranty details, please refer to the purchase documentation or contact your retailer. For technical support or inquiries, please reach out to LCFOCUS customer service through the official channels provided at the point of purchase.