TIMBERTECH AS18-2 Airbrush Compressor User Manual

1. Uvod

Thank you for choosing the TIMBERTECH AS18-2 Airbrush Compressor. This compact and efficient compressor is designed for various applications including hobby painting, body art, cake decoration, model painting, automotive graphics, and makeup. It features a piston-type, oil-less design with auto start/stop functionality, ensuring stable and pulse-free air output. Please read this manual thoroughly before operation to ensure safe and optimal performance.

2. Važne sigurnosne upute

Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja električnih uređaja kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda.

• Read all instructions before using the compressor.
• Osigurajte da izvor napajanja odgovara voltage specified on the compressor (110-120V/60Hz).
• Ne koristite kompresor u mokrom ili damp uvjetima.
• Držite djecu i kućne ljubimce dalje od radnog područja.
• Always unplug the compressor when not in use or before performing any maintenance.
• This compressor is designed for airbrush use only. Do not connect to spray guns or other high-demand air tools.
• Osigurajte odgovarajuću ventilaciju tijekom rada.
• The compressor may become warm during extended use. This is normal.

3. Komponente i značajke proizvoda

Familiarize yourself with the main components of your TIMBERTECH AS18-2 Airbrush Compressor.

Slika 3.1: Sve u svemu view of the TIMBERTECH AS18-2 Airbrush Compressor, showing its compact design, handle, pressure gauge, and air filter.

Slika 3.2: Close-up of the pressure regulator knob. To adjust pressure, pull the knob up and rotate. The arrow indicates the direction for adjustment.

Slika 3.3: Illustration of the automatic stop function, showing auto start at 3 bar (43 PSI) and auto stop at 4 bar (58 PSI) for stable air pressure.

Slika 3.4: View of the suction pads for stability and the pressure gauge for real-time pressure display. Also shows the power switch for one-button start.

Slika 3.5: Diagram highlighting the efficient heat dissipation fin design and the water trap. An arrow indicates pressing up to drain water from the trap.

Ključne karakteristike:

• Piston Type & Oil-less: Maintenance-free operation.
• Auto Start/Stop: Automatically starts at 3 bar (43 PSI) and stops at 4 bar (58 PSI) for consistent pressure.
• Pressure Regulator with Gauge: Allows precise control and monitoring of air pressure.
• Water Trap: Filters moisture from the air, crucial for clean airbrushing.
• Niska buka: Operates at ≤ 50db.
• Prijenosni dizajn: Equipped with an easy-carry handle.
• Termički zaštićeno: Prevents overheating.
• Vakuumske nožice: Provides stability and reduces vibration.

4. Postavljanje i početni rad

1. Raspakiranje: Carefully remove the compressor from its packaging. Inspect for any damage.
   

   Slika 4.1: The compressor securely packed in its protective foam casing.

2. Plasman: Place the compressor on a stable, flat surface. The rubber feet will help secure it and reduce vibration. Ensure there is adequate space around the unit for ventilation.
3. Connect Airbrush Hose: Connect your airbrush hose to the 1/8 BSP connection on the compressor's air outlet. Ensure a secure, leak-free connection.
4. Priključak za napajanje: Plug the power cable into a grounded 110-120V/60Hz electrical outlet.
5. Početno uključivanje: Press the power switch to turn on the compressor. The compressor will run until it reaches its auto-stop pressure (4 bar / 58 PSI).
6. Podešavanje tlaka: To adjust the working pressure, pull up the black knob on the pressure regulator and rotate it clockwise to increase pressure or counter-clockwise to decrease pressure. Push the knob down to lock the setting. Monitor the pressure gauge for the desired reading.

5. Upute za rad

Once set up, operating the TIMBERTECH AS18-2 is straightforward.

1. Prepare Airbrush: Fill your airbrush with the desired medium (paint, ink, etc.) and ensure it is clean and ready for use.
2. Activate Compressor: Turn on the compressor using the power switch. It will build pressure and then stop automatically.
3. Započnite s airbrushingom: When you press the trigger on your airbrush, the compressor will automatically start to supply air. When you release the trigger, the compressor will stop once the pressure reaches the auto-stop threshold. This auto start/stop feature conserves energy and reduces noise.
4. Monitor tlaka: Regularly check the pressure gauge to ensure the desired working pressure is maintained. Adjust as needed using the regulator knob.
5. Kontinuirani rad: For continuous airflow, the compressor will run as long as air is being drawn. It is designed for continuous working.
6. Nakon upotrebe: Turn off the compressor using the power switch. Disconnect the airbrush hose and clean your airbrush thoroughly.

6. Održavanje

Redovito održavanje osigurava dugotrajnost i optimalne performanse vašeg kompresora.

• Odvodni sifon za vodu: The water trap collects moisture from the air. Periodically drain the accumulated water by pressing the button at the bottom of the water trap. Do not press this drain button when the machine is working or when the pressure cutoff stops.
  

  Slika 6.1: The water trap with an arrow indicating the drain button. Ensure the compressor is off and depressurized before draining.

• Čista vanjština: Obrišite vanjski dio kompresora oglasnim materijalomamp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Filtar zraka: The compressor has an air filter. Check it periodically and clean or replace if it appears dirty or clogged. Refer to the manufacturer's guidelines for filter maintenance.
• Skladištenje: Store the compressor in a clean, dry place when not in use.

7. Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti s kompresorom.

8. Tehničke specifikacije

9. Jamstvo i podrška

TIMBERTECH products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TIMBERTECH webstranicu. Sačuvajte račun kao dokaz o kupnji.

Za dodatnu pomoć možete se izravno obratiti prodavatelju putem platforme na kojoj je proizvod kupljen.