Proizvod gotovview
Image: The Progress Lighting Crofton 3-Light Chandelier, featuring a rustic pewter finish, brushed nickel accents, and three seeded glass shades housing exposed bulbs. The fixture is suspended by a chain.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Crofton 3-Light Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Sigurnosne informacije
UPOZORENJE: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring.
- Osigurajte da svi električni spojevi budu u skladu s lokalnim propisima i uredbama, kao i s Nacionalnim električnim kodeksom (NEC).
- Do not install this fixture in wet locations. Suitable for dry or damp samo lokacije.
- Koristite samo navedenu vrstu žarulje i snagutage. Exceeding maximum wattage može uzrokovati pregrijavanje.
- Pažljivo rukujte staklenim dijelovima kako biste spriječili lomljenje.
- Držite zapaljive materijale dalje od svjetiljke tijekom rada.
Sadržaj paketa
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Chandelier Frame Assembly (Rustic Pewter/Brushed Nickel)
- Seeded Glass Shades (3)
- Mounting Hardware Kit (includes mounting strap, screws, wire nuts)
- Canopy and Collar Ring
- Sklop lanaca
- Light Bulbs (3, if included with your specific package)
Postavljanje i instalacija
Professional installation is recommended for optimal safety and performance. Follow these general steps for installation:
- Isključite napajanje: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the power completely before proceeding.
- Priprema montaže: Secure the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is firmly attached.
- Podesite duljinu lanca: Determine the desired hanging height for your chandelier. Open a chain link to remove excess chain, if necessary. Thread the fixture wires through the chain and canopy.
- Spojite ožičenje: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts. Connect the bare copper ground wire from the fixture to the house ground wire. Connect the white fixture wire to the white (neutral) house wire. Connect the black fixture wire to the black (hot) house wire. Ensure all connections are secure.
- Sigurna nadstrešnica: Tuck the connected wires neatly into the outlet box. Raise the canopy to the ceiling and secure it to the mounting strap using the collar ring.
- Install Glass Shades and Bulbs: Carefully attach the seeded glass shades to the fixture. Insert the recommended light bulbs (not exceeding maximum wattage) into the sockets.
- Vrati snagu: Nakon što je instalacija dovršena i sve komponente su pričvršćene, vratite napajanje na prekidaču ili kutiji s osiguračima.
Upute za rad
This chandelier is designed for easy operation.
- Zidni prekidač: The primary method of operation is via a standard wall switch connected to the fixture's power supply. Flip the switch to turn the chandelier on or off.
- Daljinski upravljač: This fixture supports remote control operation. If a remote control unit was included or purchased separately, refer to its specific instructions for pairing and functionality. Typically, the remote allows for on/off control and potentially dimming functions, depending on the remote and bulb compatibility.
Održavanje
Redovito održavanje osigurava dugotrajnost i izgled vašeg lustera.
- Čišćenje: To clean the fixture, turn off the power and allow it to cool. Wipe the metal surfaces with a soft, dry cloth. For glass shades, use a mild glass cleaner on a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Zamjena žarulje: Turn off the power and allow bulbs to cool completely before replacing. Unscrew the old bulb and screw in a new bulb of the same type and wattage. Refer to the specifications section for recommended bulb types.
Rješavanje problema
If your chandelier is not functioning correctly, consult the following common issues:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Svjetlo se ne pali | Nema napajanja za učvršćenje Labav spoj ožičenja Neispravna žarulja | Provjerite osigurač/prekidač strujnog kruga Provjerite jesu li svi spojevi žica sigurni (isključite napajanje) Zamijenite žarulju |
| Svjetla trepere | Labava žarulja Nekompatibilni regulator svjetla Labavo ožičenje | Zategnite žarulju Ensure dimmer is compatible with bulbs Check wiring connections (power off) |
| Daljinski upravljač ne radi | Baterije daljinskog upravljača prazne Daljinski nije uparen Prepreka | Zamijenite baterije Refer to remote's pairing instructions Ensure clear line of sight to fixture's receiver |
If these steps do not resolve the issue, contact a qualified electrician or customer support.
Tehnički podaci
- Marka: Rasvjeta napretka
- Model: Crofton (B07XM9JMTR)
- Vrsta završne obrade: Brushed Nickel, Rustic Pewter
- Broj izvora svjetlosti: 3
- Oblik rasvjetnog tijela: Luster
- Izvor napajanja: Električni na kabel
- Metoda kontrole: Daljinski
- Dimenzije proizvoda: 20 x 12 x 17 inča
- Težina artikla: 10.53 funti
- UPC: 785247218356
- Vrsta montaže: Stropni nosač
- Boja sjenila: Clear (Seeded Glass)
Jamstvo i podrška
For warranty information or technical support, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Podaci za kontakt: Refer to the Progress Lighting official webnajnovije podatke za kontakt korisničke službe potražite na web-mjestu ili pakiranju proizvoda.