KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Uvod

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Ispred view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Slika: prednja strana view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Postavljanje i programiranje

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Koraci programiranja:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Pritisnite kontrolnu tipku sedam puta. Na eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the brava button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Otpustite upravljačku tipku.
  7. Okrenite ključ za paljenje na ISKLJUČENO položaj i uklonite ga.
  8. Zatvorite vozačeva vrata.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Video: Kratak pregledview of KeylessOption Key Fob Remotes for Viper systems.

Upute za rad

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

  • Gumb za zaključavanje: Press to lock your vehicle's doors and arm the alarm system.
  • Gumb za otključavanje: Press to unlock your vehicle's doors and disarm the alarm system.
  • Gumb AUX: This button typically controls auxiliary functions, such as opening the trunk or activating a remote start feature, depending on your Viper system's configuration. Refer to your Viper system's manual for specific AUX button functionality.
  • Panic Button (*): Press and hold this button to activate the vehicle's panic alarm. Press again to deactivate.
Pod kutom view of the KeylessOption Key Fob, showing the side profile i raspored gumba.

Slika: Kutna view of the KeylessOption Key Fob, highlighting its ergonomic design.

Održavanje

Zamjena baterije:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Pritisni daljinski upravljač casinčvrsto sastavite.
Nazad view of the KeylessOption Key Fob, showing the smooth casing.

Slika: Stražnja strana view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Rješavanje problema

  • Daljinski ne reagira: Ensure the battery is fresh and correctly installed. Re-attempt the programming steps carefully. Verify the FCC ID on your original remote matches EZSDEI7141.
  • Ograničeni domet: Replace the battery. Ensure there are no obstructions between the remote and the vehicle's antenna.
  • Vehicle not chirping during programming: Double-check that the ignition is in the ON position (not ACC or START). Confirm you are pressing the Viper control button the correct number of times and holding it on the last press until a chirp is heard.

Tehnički podaci

MarkaOpcija bez ključa
Broj modelaEZSDEI7141 474V
Kompatibilni uređajiViper Aftermarket Alarm System
FCC IDEZSDEI7141
Broj gumba4 (Lock, Unlock, Aux, Panic)
Težina artikla0.634 unci
Dimenzije paketa6.77 x 4.65 x 0.47 inča

Jamstvo i podrška

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webmjesto.

Jamstveni list opcije Keyless Option

Image: KeylessOption Warranty Card, included with each purchase.

© 2025 KeylessOption. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.