Pipishell PIMF4

Pipishell PIMF4 Full Motion TV zidni priručnik s uputama

Model: PIMF4 | Brand: Pipishell

1. Uvod

This manual provides detailed instructions for the safe and proper installation and operation of your Pipishell PIMF4 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent potential injury or damage. Keep this manual for future reference.

2. Sigurnosne informacije

Always ensure the wall structure can support the combined weight of the mount and your television. If you are unsure about the strength of your wall, consult a qualified professional. Do not exceed the maximum weight capacity of 99 lbs (45 kg). This mount is designed for installation on 12" or 16" wood studs, solid concrete, or brick walls. Do not install on drywall alone. Always use appropriate safety gear during installation.

3. Sadržaj paketa

Verify that all components are present and undamaged before installation. The package includes the full motion TV wall mount, various mounting hardware (screws, anchors, washers), and a step-by-step instruction guide. If any parts are missing or damaged, please contact customer service.

4. Specifikacije

Broj modelaPIMF4
Kompatibilnost veličine televizora26-65 inča
Kapacitet težineDo 99 lbs (45 kg)
VESA kompatibilnost100x100mm do 400x400mm
Vrsta montažeFull Motion zidni nosač
Vrsta kretanjaArticulating, Swivel, Tilt, Level
Domet okretanja+/-45°
Raspon nagiba+5°/-15°
Podešavanje razine+/-3°
Proširenje sa zida3.7" do 16.42"
MaterijalLegirani čelik
BojaCrna

5. Provjera kompatibilnosti

Before installation, confirm your TV's compatibility with the Pipishell PIMF4 mount.

  • TV veličina: Compatible with most 26-65 inch flat or curved TVs.
  • Težina TV-a: Supports TVs up to 99 lbs (45 kg).
  • VESA uzorak: Check the four mounting holes on the back of your TV. The distance between these holes (width x height) must be between 100x100mm and 400x400mm.
  • Vrsta zida: Designed for installation on 12" or 16" wood studs, solid concrete, or brick walls.
  • TV Ports: Ensure the mount will not block any necessary TV ports or cables.
Diagram showing TV size, VESA, and wood stud compatibility for the Pipishell TV wall mount.

Slika: Kompatibilnost prekoview for Pipishell TV Wall Mount, showing supported TV sizes (26-65in), VESA patterns (Max 400x400mm, Min 100x100mm), and wall types (12"/16" Wood Studs).

Diagram showing how to check TV ports for interference with the wall mount.

Image: Illustration advising users to locate TV ports to ensure the mount does not block cables.

6. Vodič za instalaciju

Follow these steps for a secure and successful installation. It is recommended to have two people for TV mounting.

Step 1: Attach TV Brackets

Secure the TV brackets to the back of your television using the appropriate screws and washers provided. Ensure the brackets are centered and firmly attached.

Illustration of attaching TV brackets to the back of a television.

Image: Step 1 of installation, showing how to attach the TV brackets to the television.

Korak 2: Instalirajte zidnu ploču

Locate the desired mounting position on your wall. Use a stud finder to identify wood studs if applicable. Mark the drill holes and pre-drill according to the instructions. Secure the pre-assembled wall plate to the wall using the provided lag bolts and washers. Ensure it is level and securely fastened.

Close-up of the pre-assembled wall plate being installed on a wall.

Image: The pre-assembled wall plate, ready for mounting, highlighting its design for easy installation.

Illustration of installing the wall plate onto the wall.

Image: Step 2 of installation, demonstrating the process of installing the wall plate.

Step 3: Hang TV

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Engage any safety locks or screws to prevent accidental dislodgement.

Illustration of hanging the TV onto the installed wall plate.

Image: Step 3 of installation, showing how to hang the TV onto the wall mount.

Video instalacija

Video: Official Pipishell demonstration of the full motion TV mount's features and installation process.

7. Rad i podešavanje

The Pipishell PIMF4 mount offers various adjustments for optimal viewing.

  • Produljenje i uvlačenje: Gently pull the TV away from the wall to extend it up to 16.42 inches for closer viewing. Push the TV back towards the wall to retract it to 3.7 inches to save space.
  • Zakretanje: The mount allows for a +/-45° swivel from left to right. Carefully push or pull the TV to the desired angle.
  • Nagib: Podesite okomicu viewing angle with a +5°/-15° tilt range. Loosen the tilt adjustment screws, set the desired angle, and re-tighten the screws.
  • Niveliranje: After installation, fine-tune the TV's horizontal level by +/-3°. This can be done by adjusting the leveling screws on the TV brackets.
Diagram illustrating the extension, retraction, tilt, and leveling features of the TV mount.

Image: Visual guide to the mount's adjustable features including extension, retraction, tilt (+5°/-15°), and level (±3°).

Video: Official Pipishell video demonstrating the full motion capabilities, including swivel, tilt, and extension of the TV wall mount.

8. Održavanje

Redovito održavanje osigurava dugotrajnost i siguran rad vašeg zidnog nosača za TV.

  • Periodični pregled: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su ostali čvrsto pričvršćeni.
  • Čišćenje: Očistite nosač mekom, suhom krpom. Izbjegavajte korištenje abrazivnih sredstava za čišćenje ili otapala koja bi mogla oštetiti završnu obradu.
  • Provjera kretanja: Occasionally move the TV through its full range of motion to ensure smooth operation of the articulating arms.

9. Rješavanje problema

If you encounter any issues with your TV wall mount, refer to the following common solutions:

  • TV nije niveliran: Use the +/-3° leveling adjustment feature to correct the horizontal alignment. Ensure all mounting screws are tightened evenly.
  • Difficulty Moving TV: Check for any obstructions or overtightened joints. Lubricate moving parts if necessary with a silicone-based spray (avoid oil-based lubricants).
  • Nosač se osjeća labavo: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into studs or concrete. Do not use the mount if it feels unstable.

10. Jamstvo i korisnička podrška

Pipishell is committed to providing professional customer service. If you have any questions regarding the installation, product selection, or require assistance, please do not hesitate to contact our U.S.-based product support team. Refer to your product packaging or the official Pipishell webweb mjesto za kontakt podatke.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.