Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Uvod

Hvala na kupnjiasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Sigurnosne informacije

• Ovaj proizvod uvijek držite na suhom. Nemojte koristiti po kiši ili damp uvjetima.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Čuvati izvan dohvata djece.
• Ne koristite bljeskalicu u prisutnosti zapaljivih plinova, kemikalija ili drugih materijala.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Proizvod je gotovview

3.1 Ključne značajke

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Snažne funkcije: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Zaštita od pregrijavanja: Designed with protection against overheating for extended use.
• Učinkovita izvedba: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Funkcija zumiranja: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Široka kompatibilnost: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Sadržaj paketa

• 1 x Godox TT350N Flash Unit
• 1 x Mini stalak
• 1 x Zaštitna torbica
• 1 x filter u boji
• 1 x korisnički priručnik
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Nazivi i funkcije dijelova

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Gumb za odabir načina rada
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Gumb za testiranje/indikator spremnosti za bljesak
5. LCD ploča
6. Gumb za brzu sinkronizaciju
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Prekidač napajanja
10. Prsten za zaključavanje
11. Gumb za odabir bežične veze (gumb za višekratnu upotrebu, dugi pritisak 2 sekunde)
12. Hotshoe
13. Gumb za postavljanje
14. Odaberite Biraj
15. Odjeljak za baterije
16. Optički kontrolni senzor
17. Snop za pomoć pri fokusiranju
18. Glava za bljesak
19. Ploča za svjetlo
20. Ugrađena široka ploča

4. Postavljanje

4.1 Ugradnja baterije

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Otvorite poklopac odjeljka za baterije koji se nalazi sa strane bljeskalice.
2. Umetnite dvije AA baterije prema oznakama polariteta (+/-) unutar odjeljka.
3. Čvrsto zatvorite poklopac odjeljka za baterije.

4.2 Montiranje na kameru

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Uključivanje/isključivanje

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Za isključivanje, pomaknite prekidač za napajanje u položaj 'ISKLJUČENO'.

5. Načini rada

The TT350N offers various flash modes to suit different shooting scenarios. Press the NAČIN RADA gumb za cikličko prebacivanje između dostupnih načina rada.

5.1 TTL način rada automatskog bljeska

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Pritisnite tipku NAČIN RADA button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Pritisnite tipku NAČIN RADA button until 'M' is displayed.
• Okrenite Odaberite Biraj to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Pritisnite tipku NAČIN RADA button until 'Multi' is displayed.
• Koristite Odaberite Biraj i SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Brza sinkronizacija (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Pritisnite tipku SINKRONIZACIJA button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Kompenzacija ekspozicije bljeskalice (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• In TTL mode, press the SET button. The FEC value will blink.
• Okrenite Odaberite Biraj to adjust the FEC value.
• Pritisnite tipku SET ponovo za potvrdu.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Glavna jedinica: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Podređena jedinica: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Koristite GR/CH gumb i Odaberite Biraj to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• S1 način rada: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• S2 način rada: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the ROB button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Dugo pritisnite C.Fn button for 2 seconds to enter the custom function settings menu.
• Koristite Odaberite Biraj to navigate through the available functions.
• Pritisnite tipku SET button to select a function and then use the Odaberite Biraj promijeniti svoju vrijednost.
• Pritisnite tipku SET button again to confirm the change.
• Dugo pritisnite C.Fn button again to exit the custom function settings.

8. Održavanje

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Bljeskalicu čuvajte na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
• Izbjegavajte jake udarce ili ispuštanje uređaja.

9. Rješavanje problema

• Bljeskalica se ne aktivira: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Problemi s bežičnim aktiviranjem: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Specifikacije

11. Jamstvo i podrška

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webMolimo sačuvajte dokaz o kupnji za potrebe jamstva.