Uvod
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Sigurnosne informacije
Tijekom instalacije i upotrebe uvijek se pridržavajte sljedećih sigurnosnih mjera opreza:
- Kapacitet težine: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Struktura zida: Provjerite može li površina za montažu (zid) sigurno podnijeti zajedničku težinu nosača i televizora.
- UL naveden: This product is UL Listed, indicating it meets specific safety standards.
- Stručna pomoć: Ako niste sigurni u bilo koji dio postupka instalacije, obratite se kvalificiranom stručnjaku.
- djeca: Tijekom postavljanja držite djecu podalje od područja instalacije.
- Alati: Use appropriate tools and follow all instructions for their safe operation.
Sadržaj paketa
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Sastavljanje zidne ploče
- Nosači za TV (2 komada)
- Razni vijci za TV (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Razina mjehurića
- Ključ
- Predložak za instalaciju
Tehnički podaci
| Broj modela | 28XTu2564 |
| Marka | MONTIRATI |
| Kompatibilnost veličine televizora | 26 do 65 inča |
| Kapacitet težine | 88 lbs (40 kg) |
| VESA kompatibilnost | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Kompatibilnost tipova zidova | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Kut nagiba | +5° / -13° |
| Kut zakretanja | ±45° (Maximum swivel angle depends on TV size) |
| Podešavanje razine | ±3° (Post-installation) |
| Udaljenost od zida | 3" do 15.7" |
| Materijal | Legirani čelik |
Postavljanje i instalacija
Provjere prije ugradnje
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Provjerite težinu i veličinu televizora: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Provjerite vrstu zida: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Ne postavljajte samo na suhozid.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Koraci instalacije
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Slika 3: Gotovoview of the 3-Step Easy Installation Process.
Korak 1: Pričvrstite nosače na TV
- Pažljivo postavite televizor licem prema dolje na meku, čistu površinu kako biste spriječili oštećenje zaslona.
- Align the TV brackets with the mounting holes on the back of your TV.
- Odaberite odgovarajuće vijke, podloške i odstojnike iz kompleta hardvera koji odgovaraju montažnim rupama vašeg televizora.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Korak 2: Pričvrstite zidnu ploču na zid
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Uz pomoć, pažljivo podignite televizor s priloženim nosačima i objesite ih na zidnu ploču.
- Provjerite je li TV sigurno pričvršćen na zidnu ploču.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Upute za rad
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewing kutova.
Podešavanje Viewing kut
- Nagib: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewin udobnost.
- Zakretanje: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewiz različitih dijelova sobe.
- Ekstenzija: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Niveliranje: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Održavanje
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Čišćenje: Obrišite nosač mekom, suhom krpom kako biste uklonili prašinu. Izbjegavajte korištenje abrazivnih sredstava za čišćenje ili otapala.
- Periodične provjere: Povremeno provjeravajte sve vijke i matice kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovno zategnite.
- Pokret: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Rješavanje problema
Ako naiđete na probleme tijekom ili nakon instalacije, razmotrite sljedeća uobičajena rješenja:
- TV nije niveliran: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Nosač se osjeća labavo: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Teškoće s podešavanjem: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Dijelovi koji nedostaju: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Jamstvo i podrška
MOUNTUP TV wall mount series are backed by a Dvogodišnji plan zaštite. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: