Artillery Hornet 3D Printer User Manual

1. Uvod

Welcome to the Artillery Hornet 3D Printer User Manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Artillery Hornet is designed for ease of use and high-quality printing, featuring a highly pre-assembled structure and advanced components for reliable performance.

2. Sigurnosne informacije

• Uvijek koristite pisač u dobro prozračenom prostoru.
• Držite ruke podalje od pokretnih dijelova tijekom rada.
• Do not touch the hotend or heated bed during or immediately after printing, as they can reach high temperatures.
• Provjerite je li napajanje ispravno spojeno i uzemljeno.
• Isključite pisač iz izvora napajanja prije bilo kakvog održavanja ili čišćenja.
• Keep the printer away from flammable materials and direct sunlight.
• Supervise children and pets when the printer is in operation.

3. Sadržaj paketa

Nakon raspakiranja, molimo provjerite jesu li sve komponente prisutne:

• Artillery Hornet 3D Printer (95% pre-assembled)
• Držač kalema sa žarnom niti
• Kabel za napajanje
• USB kabel
• Tool Kit (wrenches, screwdrivers, etc.)
• SD Card with Test Files and Software
• Korisnički priručnik (ovaj dokument)
• Sample žarna nit

4. Proizvod je gotovview

The Artillery Hornet features a robust metal integrated structure and a sleek design. Key components include:

Slika 4.1: Sveukupno view of the Artillery Hornet 3D Printer.

Figure 4.2: Close-up of the innovative integrated cabling system, designed to prevent cable dangling and ensure a neat setup.

Figure 4.3: Details of the New Titan Extruder and Modular Hotend, crucial for stable and precise filament feeding and melting.

Figure 4.4: The self-developed 32-bit motherboard with replaceable drivers, enabling ultra-silent printing and enhanced performance.

Figure 4.5: The user-friendly one-key knob integrated switch for easy operation and the adjustable filament holder designed to maintain a low center of gravity.

5. Vodič za postavljanje

The Artillery Hornet is designed for quick and easy assembly, being 95% pre-assembled. Follow these steps to complete the setup:

Figure 5.1: The printer arrives 95% pre-assembled, requiring only a few minutes for final setup.

1. Raspakiranje: Pažljivo izvadite sve komponente iz pakiranja.
2. Pričvrstite portal: Secure the pre-assembled gantry to the base unit using the provided screws. The integrated cabling simplifies this connection.
3. Install Filament Holder: Mount the adjustable filament holder to the designated slot on the side of the printer.
4. Priključite napajanje: Plug the power cable into the printer and then into a grounded electrical outlet.
5. Uključivanje: Flip the power switch located at the rear of the base unit.
6. Izravnavanje kreveta: Perform manual bed leveling as instructed on the printer's display or in the detailed guide on the included SD card. Proper bed leveling is crucial for successful prints.

6. Upute za rad

Operating the Artillery Hornet is intuitive, thanks to its one-key knob integrated switch and efficient design.

6.1. Utovar filamenta

1. Place your filament spool onto the adjustable filament holder.
2. Feed the filament through the filament sensor and into the Titan Extruder.
3. Heat the hotend to the appropriate temperature for your filament type (e.g., 200°C for PLA).
4. Use the one-key knob to select the 'Load Filament' option. The extruder will automatically pull the filament through the hotend until it extrudes smoothly.

6.2. Početak ispisa

1. Prepare your 3D model using a slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file na SD karticu.
2. Umetnite SD karticu u utor za SD karticu na pisaču.
3. Navigate the menu using the one-key knob to 'Print from SD' and select your desired G-code file.
4. The printer will automatically heat up the bed and hotend, then begin printing. The self-developed 32-bit motherboard ensures ultra-silent operation during printing.

7. Održavanje

Regular maintenance ensures optimal performance and longevity of your Artillery Hornet 3D Printer.

• Očistite podlogu za ispis: After each print, clean the print bed with isopropyl alcohol to ensure good adhesion for future prints.
• Čišćenje mlaznice: Periodically clean the nozzle to prevent clogs. Use a brass brush or needle to clear any residue.
• Lubricate Z-axis Rod: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw every few months to ensure smooth vertical movement.
• Provjerite remene: Inspect the X and Y axis belts for proper tension and wear. Adjust if too loose or replace if damaged.
• Čišćenje ventilatora: Ensure cooling fans (for hotend, part cooling, and power supply) are free from dust and debris to prevent overheating.

8. Rješavanje problema

Evo nekih uobičajenih problema i njihovih mogućih rješenja:

9. Specifikacije

Figure 9.1: Dimensions of the Artillery Hornet 3D Printer.

10. Jamstvo i podrška

For warranty information and technical support, please refer to the documentation included with your product or visit the official Artillery webstranicu. Sačuvajte račun kao dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.