Thomson Wireless Doorbell with Integrated Socket - Model 513132

1. Uvod

Thank you for choosing the Thomson Wireless Doorbell with Integrated Socket, Model 513132. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new doorbell system. Please read these instructions carefully before use and retain them for future reference.

2. Proizvod je gotovview i sadržaj paketa

The Thomson Wireless Doorbell system consists of two main components: a plug-in receiver (chime unit) with an integrated Shuko socket and a battery-free push button transmitter.

Sadržaj paketa:

• 1 x Wireless Doorbell Receiver (Chime Unit) with Integrated Shuko Socket
• 1 x Battery-Free Push Button Transmitter
• Mounting hardware (screws, adhesive pad)
• Priručnik s uputama

Slika 1: Thomson Wireless Doorbell system. This image displays both the plug-in chime unit with its integrated socket and the compact, white push button transmitter.

3. Ključne značajke

• Elegant and Minimalist Design: Blends seamlessly with most interior decors.
• Integrated Shuko Socket: The receiver unit features a pass-through socket, allowing you to retain access to a power outlet.
• Brza i jednostavna instalacija: Designed for rapid setup and user-friendly operation.
• Pre-Programmed Units: The chime and push button are pre-programmed at the factory to prevent interference with other wireless devices.
• 32 Selectable Chimes: Choose from a variety of melodies.
• Podesiva glasnoća: Customize the sound level to your preference.
• Wireless and Battery-Free Push Button: The push button generates its own energy when pressed, eliminating the need for batteries. This is environmentally friendly and economical.
• Radni raspon: Up to 150 meters (open field).

4. Postavljanje i instalacija

4.1 Installing the Receiver (Chime Unit)

1. Select a suitable indoor power outlet within range of your desired push button location.
2. Plug the receiver unit directly into the power outlet. Ensure it is securely seated.
3. The integrated Shuko socket on the receiver remains functional, allowing you to plug in other electrical devices.

Slika 2: The plug-in chime unit. This image shows the receiver unit with its integrated Shuko plug, ready to be inserted into a wall outlet.

4.2 Installing the Push Button Transmitter

1. Choose a flat, clean surface near your entrance for the push button. Consider the optimal operating range (up to 150m in open areas, which may be reduced by walls and obstacles).
2. Clean the mounting surface thoroughly to ensure proper adhesion if using the adhesive pad.
3. Option A (Adhesive Mounting): Remove the protective film from the adhesive pad on the back of the push button and firmly press it onto the chosen surface for at least 30 seconds.
4. Option B (Screw Mounting): Use the provided screws to securely attach the push button to the wall. Ensure not to overtighten.
5. Test the doorbell by pressing the push button. The receiver should chime.

Note: The push button is battery-free and generates power mechanically when pressed. No battery installation is required.

5. Upute za rad

5.1 Selecting a Chime

The receiver unit has a button, typically located on the side or front, for cycling through the 32 available chimes. Press this button repeatedly until you hear your desired melody. The selected chime will be saved automatically.

5.2 Podešavanje glasnoće

A separate button or dial on the receiver unit allows you to adjust the volume level. Press the volume button or turn the dial to increase or decrease the sound output to your preferred level.

5.3 Pairing Additional Push Buttons (If Applicable)

Your doorbell is pre-programmed. If you purchase additional Thomson compatible push buttons, refer to their specific instructions for pairing. Generally, this involves a pairing mode on the receiver and pressing the new push button.

6. Održavanje

• Čišćenje: Obrišite zvonce na vratima mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Tipka bez baterije: Since the push button is battery-free, no battery replacement is ever needed. This reduces maintenance and environmental impact.
• Prijemna jedinica: Ensure the receiver unit is plugged into a functional power outlet.
• Plasman: Periodically check that the push button is securely mounted and that the receiver is not obstructed by large metal objects or other electronics that could interfere with the wireless signal.

7. Rješavanje problema

8. Specifikacije

9. Važne sigurnosne informacije

• Do not expose the receiver unit to water or excessive humidity. It is designed for indoor use only.
• Do not open or attempt to repair the units yourself. Refer all servicing to qualified personnel.
• Ensure the power outlet used for the receiver is easily accessible for disconnection.
• Čuvati izvan dohvata djece.
• Odgovorno odlažite materijale za pakiranje.