myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Uvod

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Važne sigurnosne informacije

• Opasnost od električnog udara: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Pravilno uzemljenje: Provjerite je li timer pravilno uzemljen.
• Zaštita od preopterećenja: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Plasman: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Poklopci izlaza: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Upravljanje kabelom: Route cords to prevent tripping hazards and damage.
• Održavanje: Isključite napajanje prije bilo kakvog održavanja ili čišćenja.

Sadržaj paketa

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Priručnik s uputama

Značajke proizvoda

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Digitalni mjerač vremena: Programmable with custom ON/OFF times.
• Senzor svjetla: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Otporan na vremenske uvjete: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Zaštita od preopterećenja: Integrated 15A/1875W circuit breaker for safety.

Postavljanje

1. Sastavite kolac: Attach the stake sections together and then to the timer unit.
2. Plasman: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Početni priključak napajanja: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Resetirajte mjerač vremena: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the RESETIRANJE button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Povežite uređaje: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Upute za rad

1. Setting Day & Time

1. Pritisnite i držite SAT dugme.
2. Dok drži SAT, pritisnite TJEDAN button repeatedly until the desired day of the week appears at the top of the display.
3. Nastavite držati SAT, i pritisnite SAT button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding SAT, pritisnite MIN više puta pritisnite gumb za postavljanje trenutnih minuta.
5. Otpustite SAT gumb za spremanje postavki.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Pritisnite tipku PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Pritisnite tipku TJEDAN button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Pritisnite tipku SAT gumb za postavljanje željenog sata UKLJUČENJA.
4. Pritisnite tipku MIN gumb za postavljanje željene minute UKLJUČENJA.
5. Pritisnite tipku PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Nakon što ste postavili sve željene programe, pritisnite tipku SAT gumb za povratak na glavni zaslon.

To clear a program: Dok viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Pritisnite i držite PRIRUČNIK button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• AUTO UKLJUČENO: The timer will remain ON until the next programmed OFF time.
• AUTO ISKLJUČENO: The timer will remain OFF until the next programmed ON time.
• PRIRUČNIK: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Od sumraka do zore: The timer will automatically turn ON at dusk and remain ON until dawn.
• Tajmer za odbrojavanje: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Pritisnite tipku TJEDAN i SAT buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Za deaktivaciju pritisnite tipku TJEDAN i SAT buttons simultaneously again. "RND" will disappear.

6. Ljetno računanje vremena

To adjust the time for Daylight Saving:

1. Pritisnite tipku SAT i MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Održavanje

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Očistite jedinicu mekom, damp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.

Rješavanje problema

Tehnički podaci

Jamstvo i podrška

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webstranicu. Sačuvajte račun kao dokaz o kupnji.