JTECH ServerCall Transmitter Paging System User Manual

1. Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your JTECH ServerCall Transmitter Paging System. Please read this manual thoroughly before operating the system to ensure proper function and longevity.

2. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u vašem paketu:

• ServerCall Transmitter Unit
• 24 Rugged Pagers
• Multi-Pager Charging Base(s) (quantity may vary based on configuration)
• Adapter za napajanje odašiljača
• Power Adapter(s) for Charging Base(s)
• Antena za odašiljač
• Korisnički priručnik (ovaj dokument)

Image: A single JTECH rugged pager, displaying the number '2'. These pagers are designed for durability.

Image: A multi-pager charging base with several pagers docked, indicating they are charging.

3. Postavljanje

1. Raspakirajte komponente: Pažljivo izvadite sve komponente iz pakiranja.
2. Connect Transmitter Antenna: Screw the antenna securely into the designated port on the back of the ServerCall Transmitter unit.
3. Spojite napajanje odašiljača: Plug the transmitter's power adapter into the power input port on the transmitter, then plug the adapter into a standard electrical outlet. The transmitter display should illuminate.
4. Position Charging Base(s): Place the charging base(s) in a convenient location, ensuring access to electrical outlets.
5. Connect Charging Base Power: Plug the charging base power adapter(s) into the charging base(s), then into standard electrical outlets.
6. Naplata pagera: Place all 24 pagers onto the charging base(s). Ensure each pager makes proper contact with the charging pins. The pagers should indicate charging status (e.g., an indicator light). Allow pagers to charge fully before first use (typically 4-6 hours).

Image: The JTECH ServerCall Transmitter unit, showing its display and control buttons.

4. Upute za rad

4.1. Paging Individual Pagers

1. Ensure the desired pager is powered on and within range.
2. On the ServerCall Transmitter, locate the numbered button corresponding to the pager you wish to call (e.g., button '1' for pager '1').
3. Press the numbered button once. The pager will vibrate, flash, or beep according to its programmed alert mode.
4. The transmitter display may show confirmation or the pager number being called.

4.2. Paging Manager Groups

The system includes dedicated buttons for paging manager groups (MGR 91, MGR 92, MGR 93, MGR 94).

1. To page a specific manager group, press the corresponding MGR gumb (npr. MGR 91).
2. All pagers assigned to that manager group will receive the alert.

4.3. Paging All Pagers

To page all active pagers simultaneously:

• Pritisnite tipku SVIH STRANICA gumb na odašiljaču.
• All 24 pagers will receive the alert.

4.4. Cancelling a Page

If a page needs to be cancelled or cleared from the system:

• Pritisnite tipku OTKAZATI gumb na odašiljaču.
• The display may show "CANCEL PANEL". Follow on-screen prompts or press ENTER to confirm cancellation of active pages.

Image: The ServerCall Transmitter display indicating "CANCEL PANEL", used for clearing active pages.

4.5. Using Menu and Setup Functions

The JELOVNIK i POSTAVKA buttons provide access to advanced system configurations. Refer to the on-screen prompts for specific settings such as time adjustment, pager programming, or alert modes.

• Pritisnite 2X MENU for quick access to common menu options.
• Pritisnite 3X SELECT to cycle through options within a menu.
• Pritisnite POSTAVKA to enter the system setup menu.
• Koristiti ENTER za potvrdu odabira i OTKAZATI to exit menus without saving changes.

5. Održavanje

5.1. Čišćenje

• Wipe the transmitter, pagers, and charging base with a soft, damp tkanina.
• Ne koristite abrazivna sredstva za čišćenje, otapala ili jake kemikalije.
• Ensure all devices are dry before reconnecting to power.

5.2. Battery Care (Pagers)

• Keep pagers charged when not in use to maintain battery health.
• Avoid fully discharging pager batteries frequently.
• If pagers will be stored for an extended period, charge them fully, then store them in a cool, dry place. Recharge periodically (e.g., every 3 months) to prevent deep discharge.

6. Rješavanje problema

7. Specifikacije

• Model: ServerCall Transmitter Paging System (B085L154BY)
• Proizvođač: JTECH
• Pagers Included: 24 Rugged Pagers
• Izvor napajanja: AC Power Adapters (included)
• Radna frekvencija: (Information not provided, typically in UHF band)
• Raspon: (Information not provided, varies by environment)
• Dimenzije: (Informacije nisu dostavljene)
• Težina: (Informacije nisu dostavljene)

Note: Specific technical specifications such as operating frequency, range, dimensions, and weight are not provided in the product details. For detailed technical specifications, please refer to the official JTECH product page or contact JTECH support.

8. Informacije o jamstvu

The JTECH ServerCall Transmitter Paging System is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your product or visit the official JTECH webstranicu. Sačuvajte dokaz o kupnji za jamstveni servis.

9. Korisnička podrška

If you encounter any issues not covered in this manual or require further assistance, please contact JTECH Customer Support:

• Webstranica: Visit the JTECH Store on Amazon (for general information)
• For direct technical support, please refer to the contact information provided in your product packaging or on the official JTECH corporate webmjesto.