MOUNTUP Monitor Mount Instruction Manual

1. Uvod

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Sigurnosne informacije

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• Ne prekoračujte maksimalnu nosivost od 8 kg.
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Tijekom instalacije držite podalje djecu i kućne ljubimce.

3. Popis pakiranja

Prije početka instalacije provjerite jesu li sve komponente prisutne i neoštećene.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

Paket treba sadržavati:

• Monitor Arm Assembly (Upper and Lower Arms)
• Stup za stol
• C-Clamp Baza
• Komponente baze ušica
• VESA ploča
• All necessary screws, washers, and Allen keys
• Priručnik s uputama

4. Postavljanje i instalacija

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp i mogućnosti montaže Grommet-a.

4.1 C-Clamp Montaža

1. Pričvrstite C-clamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. Zategnite C-clamp Zavrtajte vijke dok nosač nije sigurno pričvršćen za stol. Provjerite je li stabilan i da se ne ljulja.

4.2 Ugradnja ušice

1. Rastavite C-clamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. Pažljivo postavite monitor licem prema dolje na meku, čistu površinu.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Upravljanje kabelima

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Video vodič za instalaciju

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Rad i podešavanje

The MOUNTUP monitor arm offers full motion capabilities for optimal viewin udobnost.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Podešavanje napetosti plinske opruge

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Podešavanje nagiba

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewing kutova.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Okretanje i rotacija

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Održavanje

Redovito održavanje osigurava dugotrajnost i optimalne performanse vašeg nosača monitora.

• Čišćenje: Obrišite nosač mekom krpomamp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili otapala koja mogu oštetiti završnu obradu.
• Inspekcija: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto pričvršćeni. Po potrebi ih ponovno pritegnite.
• Plinska opruga: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

7. Rješavanje problema

Ako naiđete na bilo kakve probleme, pogledajte sljedeće uobičajene probleme i rješenja:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• Mount feels unstable or wobbly: Osigurajte C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Teškoće s pomicanjem ruke: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Ako problemi potraju, obratite se korisničkoj podršci.

8. Specifikacije

9. Jamstvo i podrška

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.