JJRC H36 Mini RC Quadcopter Drone User Manual

1. Uvod

The JJRC H36 is a compact and agile mini RC quadcopter drone designed for both indoor and outdoor flight. Featuring a 6-axis gyro for stable flight, 2.4GHz control for anti-interference, and functions like 3D-flips and headless mode, it offers an engaging flying experience. This manual provides essential information for the safe and effective operation of your H36 drone.

2. Proizvod je gotovview

2.1 Ključne značajke

• Sci-fi design with fine workmanship.
• LED lights for night flight visibility.
• 2.4GHz technology for anti-interference control.
• 360° propeller protectors for enhanced safety.
• High/low speed switch for varied flight conditions.
• 3D-flip function for acrobatic maneuvers.
• Headless mode for simplified orientation control.
• One-key return function for easy recall.
• Newest 6-Axis Gyro control system for stable flight.

2.2 Sadržaj paketa

• 1 x JJRC H36 Quadcopter
• 1 x 2.4G Transmitter (Mode 2)
• 2 x 3.7V 150mAh Li-Po Battery
• 1 x USB kabel za punjenje
• 4 x Rezervna propelera
• 1 x engleski priručnik

Image 1: The JJRC H36 drone, two 150mAh Li-Po batteries, and the 2.4G remote controller.

Slika 2: Krupni plan view of the JJRC H36 drone, highlighting its compact design and propeller protectors.

3. Sigurnosne informacije

3.1 Opća upozorenja

• This RC model is not a toy and is not suitable for children under 14 years old. Keep it away from children.
• Carefully read the instruction manual before any use. If you are a beginner, it is advisable to be assisted by an experienced adult.
• This RC drone is equipped with coreless DC motors; continuous use with different batteries is not suggested to prevent motor damage.

3.2 Battery Cautions

• Do not over-charge or over-discharge batteries.
• Do not place batteries near high-temperature conditions.
• Ne bacajte baterije u vatru.
• Nemojte bacati baterije u vodu.
• The USB charger is only for DC computer USB ports; never use it with AC circuits.
• Always remember never to over-charge the battery.

4. Postavljanje

4.1 Punjenje baterije drona

1. Spojite bateriju drona na priloženi USB kabel za punjenje.
2. Plug the USB charging cable into a computer's USB port.
3. Charging time is approximately 50 minutes. Do not overcharge.

4.2 Ugradnja baterije drona

1. Provjerite je li dron isključen.
2. Carefully insert the charged 3.7V 150mAh Li-Po battery into the drone's battery compartment.
3. Pričvrstite poklopac odjeljka za baterije.

4.3 Umetanje baterija odašiljača

1. Open the battery compartment on the back of the 2.4G transmitter.
2. Umetnite dvije AA baterije (nisu uključene), pazeći na ispravan polaritet.
3. Zatvorite poklopac odjeljka za baterije.

Slika 3: Krupni plan view of the JJRC H36 remote controller, showing its controls and power switch.

4.4 Binding the Drone with Transmitter

1. Provjerite je li baterija drona potpuno napunjena.
2. Dron postavite na ravnu, ravnu površinu.
3. Uključite dron.
4. Within 2 seconds, power on the transmitter.
5. The drone's lights will stop flashing and become solid, indicating a successful binding.

5. Upute za rad

5.1 Osnovne kontrole leta

The 2.4G transmitter (Mode 2) controls the drone's movement:

• Lijeva palica (gas/skretanje):
  • Gore/Dolje: Povećanje/smanjenje nadmorske visine.
  • Lijevo/Desno: Zakrenite dron lijevo/desno (skretanje).
• Desna palica (nagib/rotacija):
  • Gore/Dolje: Pomiče dron naprijed/natrag (nagib).
  • Left/Right: Move drone left/right (sideward flight/roll).

5.2 Posebne funkcije

• Prekidač za visoku/nisku brzinu: Press the designated button on the transmitter to toggle between high and low-speed modes, suitable for different flying environments and skill levels.
• 3D-Flip Function: To perform a 3D-flip, fly the drone to a sufficient height, then press the 3D-flip button and push the right stick in the desired flip direction (forward, backward, left, or right).
• Bezglavi način rada: Activate headless mode by pressing the dedicated button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's actual front direction. Press again to exit.
• Povratak jednim ključem: Press the one-key return button, and the drone will attempt to fly back towards its take-off point. This function is an aid and not a precise landing system.

6. Održavanje

• Pregled propelera: Regularly check propellers for any damage (bends, cracks). Replace damaged propellers with spare ones provided in the package. Ensure propellers are installed correctly.
• Čišćenje: Use a soft, dry cloth to clean the drone and transmitter. Avoid using water or solvents.
• Skladištenje: When not in use, store the drone and transmitter in a cool, dry place, away from direct sunlight. Remove batteries from the transmitter if storing for extended periods.

7. Rješavanje problema (ČPP)

• The aircraft fails to connect with the transmitter.
  First, ensure the battery is fully charged. Then, power on the drone and the transmitter within 2 seconds of each other.
• One or more motors do not work.
  Ensure the drone was placed on a flat surface during the binding process. If the issue persists, the motor may be damaged and require replacement.
• Accessories are missing from the package.
  Carefully check the gift box package inside and outside. If items are still missing, contact customer service.
• The aircraft is out of balance (cannot fly, deviates, spins on the ground).
  Check that the propellers are installed in the correct way and are not damaged. Ensure the drone was calibrated on a flat surface during binding.
• During charging, the battery and charging cable melt.
  The USB charger is only designed for DC computer USB ports. Never use it with AC circuits. Always ensure not to over-charge the battery.

8. Specifikacije

9. Jamstvo i podrška

For warranty information or technical support, please refer to the retailer's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.