Neewer S101-300W Professional Studio Monolight Strobe Flash Light

1. Uvod

The Neewer S101-300W Studio Monolight is a professional-grade strobe flash designed for studio photography, offering powerful and consistent illumination. This manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your S101-300W monolight.

Image: The Neewer S101-300W Studio Monolight, showcasing its compact design and included power cable.

2. Sigurnosne informacije

Please read all safety warnings and instructions before using this product to prevent electric shock, fire, or serious injury.

• Ne izlažite uređaj kiši ili vlazi.
• Ne rastavljajte niti pokušavajte sami popraviti uređaj. Sve servisne radove prepustite kvalificiranom osoblju.
• Provjerite je li napajanje voltage odgovara zahtjevima navedenim na jedinici.
• Keep the unit away from flammable materials. The modeling lamp can become very hot during operation.
• Allow the modeling lamp to cool down before touching or replacing it.
• Always disconnect the power cord before cleaning or when not in use.

3. Proizvod je gotovview i komponente

Familiarize yourself with the various parts and controls of your S101-300W monolight.

Image: Detailed diagram illustrating the various components and control buttons on the rear panel of the S101-300W monolight.

1. Optical Signal Receiver: Detects optical flash signals from a master flash.
2. Gumb za gore: Increases flash power or modeling lamp svjetlina.
3. Modeliranje Lamp Indikator: Shows the status of the modeling lamp.
4. Optical Flash Indicator: Lights up when an optical flash is detected.
5. Optical Flash Button (SLAVE): Toggles S1/S2 slave modes.
6. Modeliranje Lamp Button (MODEL): Okreće modeliranje lamp on/off and adjusts brightness.
7. Prikaz: Shows current power settings.
8. Gumb prema dolje: Decreases flash power or modeling lamp svjetlina.
9. Buzzing Indicator: Indicates the buzzing sound status.
10. Test Flash Indicator: Lights up when the unit is ready to flash.
11. Test Button (TEST): Aktivira probni bljesak.
12. Buzzing Button (BUZZ): Toggles the buzzing sound on/off.
13. Sync Socket: 3.5mm port for wired sync connection.
14. Utičnica: Povezuje kabel za napajanje.
15. Prekidač za napajanje: Uključuje/isključuje uređaj.
16. Otvor za kišobran: Socket for mounting a soft umbrella.
17. Gumb za podešavanje kuta: Secures the tilt angle of the monolight.
18. Stand Fixing Knob: Secures the monolight to a light stand.

Slika: Krupni plan view of the 150W modeling lamp and flash tube, highlighting their specifications.

4. Postavljanje

4.1 Mounting the Monolight

1. Attach the monolight to a compatible light stand using the stand fixing knob. Ensure it is securely tightened.
2. Adjust the tilt angle of the monolight using the angle adjustment knob to direct the light as needed.

Image: Demonstration of the 180° angle adjustment feature for precise light positioning.

4.2 Attaching Accessories (Bowens Mount)

The S101-300W features a standard Bowens mount for attaching various light modifiers.

1. Align the accessory (e.g., standard reflector, softbox, beauty dish) with the Bowens mount on the front of the monolight.
2. Insert the accessory and rotate it clockwise until it clicks into place, securing it firmly.
3. To remove, press the release button on the mount and rotate the accessory counter-clockwise.

Image: Illustration of the Bowens style mount and compatible light modifiers such as standard reflector, softbox, conical snoot, soft ball, and beauty dish.

4.3 Priključak za napajanje

Connect the provided power cord to the power socket on the monolight and then to a suitable AC power outlet.

For use with a soft umbrella, insert the umbrella shaft into the umbrella hole located on the mounting bracket.

Image: Close-up of the umbrella hole, designed to mount a soft umbrella for diffused lighting.

5. Upute za rad

5.1 Uključivanje/isključivanje

Flip the Power Switch to the "ON" position to power on the monolight. The display will illuminate. Flip to "OFF" to power down.

5.2 Podešavanje snage bljeskalice

Koristite Up i dolje buttons to adjust the flash output power. The power level is displayed on the screen, ranging from 7.0 (1/8th power) to 10 (1/1 power). The unit will emit a buzzing sound when fully recycled and ready to flash (if buzzing is enabled).

5.3 Modelling Lamp Operacija

Pritisnite tipku MODEL button to turn the 150W modeling lamp uključeno ili isključeno. Koristite Up i dolje buttons to adjust its brightness (L1-L9). The modeling lamp automatically extinguishes when the flash fires.

Važno: Modeliranje lamp can become very hot. For safety, it is recommended not to use the modeling lamp for more than 10 minutes continuously, especially with flammable accessories. Allow it to cool down for at least 10 minutes before continued use.

5.4 Flash Modes (S1/S2 Optical Control, Sync Socket)

The S101-300W supports multiple flash triggering modes:

• ručna kontrola: Trigger the flash directly using the TEST button or a compatible trigger connected via the sync socket.
• S1 Mode (Optical Slave): In S1 mode, the monolight acts as a slave flash. It will trigger simultaneously with the first flash from a master flash unit. This is suitable for manual flash systems.
• S2 Mode (Pre-flash Cancel Slave): In S2 mode, the monolight also acts as a slave but ignores the pre-flash from a master flash unit (common in TTL systems). It will trigger on the second flash.
• 3.5mm Sync Socket: Connect a wired sync cable from your camera or flash trigger to the 3.5mm Sync Socket for reliable wired synchronization.

Image: Visual representation of the multiple flash modes: Manual Control, S1/S2 Optical Control, and 3.5mm Sync Socket.

5.5 Recycle Time and Flash Duration

The monolight has a recycle time of 0.4-2.5 seconds, depending on the flash power setting. The flash duration ranges from 1/2000s to 1/800s, allowing for freezing fast motion.

6. Održavanje

• Čišćenje: Use a soft, dry cloth to clean the exterior of the monolight. Do not use abrasive cleaners or solvents.
• Skladištenje: Store the monolight in a cool, dry place, away from direct sunlight and excessive humidity.
• Zamjena žarulje: Ako je modeliranje lamp or flash tube needs replacement, ensure the unit is unplugged and cooled down. Refer to a qualified technician for flash tube replacement.

7. Rješavanje problema

8. Specifikacije

9. Jamstvo i podrška

NEEWER products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official NEEWER webstranicu. Sačuvajte račun kao dokaz o kupnji.

Za dodatnu pomoć možete se obratiti korisničkoj službi NEEWER-a putem njihovih službenih kanala.