ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. Uvod

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. Sigurnosne upute

• Always disconnect the power supply at the main circuit breaker before installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
• Ovaj proizvod je dizajniran za samo za unutarnju upotrebuNe postavljajte u mokro iliamp lokacije.
• Ensure the ceiling material can support the weight of the fixture.
• Nemojte prekoračiti maksimalnu vattage of 50W for the GU10 bulb.
• Avoid touching the bulb directly with bare hands, as oils can reduce bulb life.
• Držite zapaljive materijale dalje od rasvjetnog tijela.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• 1x Recessed Spotlight Housing (White Aluminum)
• Hardver za montažu
• Električni kabel
• Ljepljiva podloga

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. Postavljanje i instalacija

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 Koraci instalacije

1. Isključite napajanje: Provjerite je li glavni dovod struje u područje instalacije isključen prekidačem.
2. Priprema otvora na stropu: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. Žičani spojevi: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. Kućište za montiranje: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. Ugradnja GU10 žarulje: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. Završna montaža: Insert the inner light component into the outer housing.
7. Vrati snagu: Nakon što je instalacija dovršena i svi priključci su sigurni, vratite napajanje na prekidaču.

5. Upute za rad

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is ne može se zatamniti.

5.1 Zamjena žarulje

To replace the GU10 bulb:

1. Isključite napajanje: Always disconnect power at the circuit breaker before replacing the bulb.
2. Ostavite da se ohladi: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. Umetnite novu žarulju: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. Vrati snagu: Vratite napajanje na prekidaču.

6. Održavanje

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• Čišćenje: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Nema dijelova koje može servisirati korisnik: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7. Rješavanje problema

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Svjetlo se ne pali:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • Provjerite je li žarulja GU10 ispravno ugrađena i neispravna. Pokušajte je zamijeniti žaruljom za koju znate da je ispravna.
  • Verify electrical connections are secure (consult a qualified electrician if unsure).
• Treperenje svjetla:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Check for loose wiring connections (consult a qualified electrician).

8. Specifikacije

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. Jamstvo i podrška

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.