Uvod
The Youmile CN3791 is a 12V solar charge controller board designed for single-cell lithium batteries. It features Maximum Power Point Tracking (MPPT) to efficiently extract power from solar panels, ensuring optimal charging performance even with varying light intensity. This module automatically adjusts to maximize the power output from your photovoltaic cells, converting it into charging current for your battery.
Slika 1: Youmile CN3791 12V MPPT Solar Charge Controller Board with JST PH2.0 cables.
Proizvod gotovview
Ovaj odjeljak pruža vizualni pregledview of the CN3791 module, highlighting its key components and interfaces.
Slika 2: Vrh view of the CN3791 board, displaying the main chip, inductor, capacitor, and JST PH2.0 connectors for solar input and battery output.
Slika 3: Dno view of the CN3791 board, indicating potential voltage selection points (5V, 6V, 9V, 12V). For this specific 12V model, the input voltage requirement is 12V for charging a 3.7V lithium battery.
Postavljanje i veze
Follow these steps to correctly connect your solar panel and battery to the CN3791 charge controller board.
- Prepoznajte priključke: The board has two sets of JST PH2.0 connectors. One set is labeled "SOLAR IN" for the solar panel, and the other is labeled "BAT+" and "BAT-" for the lithium battery.
- Povežite solarni panel: Insert the solar panel's JST PH2.0 connector into the "SOLAR IN" port. Ensure correct polarity (+ to + and - to -).
- Povežite bateriju: Insert the lithium battery's JST PH2.0 connector into the "BAT+" and "BAT-" ports. Again, observe correct polarity.
- Optional Load Connection: The board also provides output terminals for a 3.7V load, allowing the battery to power a device while being charged.
Slika 4: Connection diagram illustrating how to connect the solar panel, 3.7V lithium battery, and an optional 3.7V load to the CN3791 module using JST PH2.0 interfaces.
Slika 5: The CN3791 board with the included JST PH2.0 cables connected, ready for solar panel and battery integration.
Slika 6: Krupni plan view of the JST PH2.0 connector cable, typically used for connecting the solar panel and battery to the charge controller.
Upute za rad
Once connected, the CN3791 module operates automatically to charge your lithium battery.
- Automatic MPPT: The integrated CN3791 chip continuously tracks the maximum power point of the solar panel. This ensures that the maximum available power is harvested from the solar panel and converted into charging current for the battery, even under varying light conditions.
- Proces punjenja: When the solar panel receives sufficient light, the module will begin charging the connected 3.7V lithium battery. The charging status may be indicated by onboard LEDs (refer to specific board markings if present).
- Zaštita od prekomjernog punjenja: The module is designed to prevent overcharging of the lithium battery, extending its lifespan.
Održavanje
The CN3791 solar charge controller board requires minimal maintenance to ensure long-term performance.
- Držati čistim: Ensure the board is free from dust, dirt, and moisture. Use a soft, dry brush or cloth for cleaning if necessary.
- Zaštita okoliša: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme conditions or corrosive environments.
- Provjerite veze: Periodically check all JST PH2.0 connections to ensure they are secure and free from corrosion.
Rješavanje problema
If you encounter issues with your CN3791 solar charge controller, consider the following troubleshooting steps:
- Nema indikacije punjenja:
- Verify that the solar panel is receiving sufficient sunlight.
- Check all connections (solar panel to board, battery to board) for proper seating and polarity.
- Osigurajte da solarni panel voltage is appropriate for the 12V input requirement of the board.
- Confirm the battery is a compatible 3.7V lithium battery.
- Niska struja punjenja:
- Provjerite je li solarni panel čist i bez prepreka.
- Check for any damage to the solar panel or connecting wires.
- Verify that the solar panel's power output matches the board's capabilities.
- Board Overheating:
- Osigurajte odgovarajuću ventilaciju oko ploče.
- Provjerite je li ulazni voltage and current from the solar panel do not exceed the board's maximum ratings.
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | JK-YM-046 |
| Ulazni voltage | 12 Volts (from solar panel) |
| Izlazni voltage | Designed for 3.7V single-cell lithium battery charging |
| Vrsta punjenja | MPPT (Praćenje maksimalne točke snage) |
| Vrsta baterije | Single-cell lithium battery |
| Priključci | JST PH2.0 |
| Dimenzije (D x Š x V) | 45mm x 20mm x 12mm (approximate, based on image) |
| Težina | 10 grama (otprilike) |
Slika 7: Physical dimensions of the CN3791 module, showing a length of 45mm and a width of 20mm.
Jamstvo i podrška
For warranty information or technical support, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific details.
Službeni korisnički priručnik u PDF formatu također je dostupan za preuzimanje: Preuzmite PDF Priručnik