1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JIAYIN JYPC-7A Solenoid Water Pump. Please read it thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Sigurnosne informacije
Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje pumpe:
- Električna sigurnost: Provjerite da napajanje odgovara volumenu pumpetage (AC 100-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting. All electrical connections should be performed by a qualified professional.
- Kompatibilnost s tekućinom: This pump is designed for water or non-corrosive liquids only. Using corrosive liquids may damage the pump and void the warranty.
- Temperaturna ograničenja: Do not exceed the specified working temperatures: ambient temperature (Ta) 70℃ / 158℉ and medium temperature (Tf) 60℃ / 140℉.
- Montaža: Securely mount the pump to prevent vibration and movement. Ensure proper ventilation.
- Osobna zaštitna oprema: Wear appropriate personal protective equipment (e.g., safety glasses, gloves) during installation and maintenance.
3. Proizvod je gotovview
The JIAYIN JYPC-7A is an electromagnetic solenoid water pump designed for various applications requiring precise liquid transfer. It features a robust plastic construction and operates on AC 100-120V power.
Slika 3.1: Ispred view of the JIAYIN JYPC-7A Solenoid Water Pump, showing the main body, inlet/outlet ports, and electrical connections.
Ključne karakteristike:
- No rust, no clogging design.
- Operates on AC 100-120V, 60Hz, 60W.
- Flow rate of 2400 ±10% cc/min.
- Suitable for water or non-corrosive liquids.
- Designed for intermittent duty (ID2/1min).
Slika 3.2: Krupni plan view of the product label on the JIAYIN JYPC-7A pump, displaying model number, voltage, power, frequency, and working mode.
4. Specifikacije
Detailed technical specifications for the JIAYIN JYPC-7A Solenoid Water Pump:
| Specifikacija | Vrijednost |
|---|---|
| Marka | JIAYIN |
| Model | JYPC-7A |
| Tip | Water Solenoid Pump |
| Voltage | AC 100-120 V |
| Frekvencija | 60 Hz |
| Vlast | 60 W |
| Brzina protoka | 2400 ±10% cc/min |
| Radni tlak | 0-2 bara |
| Način rada | ID2/1min (Intermittent Duty) |
| Radni medij | Water or non-corrosive liquid |
| Temperatura okoline (Ta) | Max 70℃ / 158℉ |
| Medium Temperature (Tf) | Max 60℃ / 140℉ |
| Materijal | Plastični |
| Neto težina | 423g / 14.9oz (approx. 15 ounces) |
| Dimenzije proizvoda | 4.53 x 1.93 x 1.18 inča (115 x 49.6 x 30 mm) |
| Maksimalna visina podizanja | 20 centimetara |
| Razina zvuka | 45 decibela |
| Duljina kabela | 11.8 inča |
Slika 4.1: Nadview of pump dimensions and performance characteristics including flow/pressure, flow/time, and temperature rise/time graphs.
5. Postavljanje i instalacija
Follow these steps for proper installation of the JYPC-7A pump:
- Montaža: Securely mount the pump in a stable position. Refer to the dimensional drawings for mounting points and overall size.
- Ulazni/izlazni priključci: Connect the appropriate tubing to the pump's inlet and outlet ports. The flow direction is indicated on the pump's label (refer to Figure 3.2). For flow testing, a 17.7-inch silicon tube with an outer diameter of 0.4 inches and an inner diameter of 0.24 inches is typically connected to the water inlet port. Ensure all connections are tight to prevent leaks.
- Električni priključak: Connect the pump to an AC 100-120V, 60Hz power source. Ensure the wiring is correct and secure. It is recommended to use appropriate connectors and insulate all exposed wires.
- Integracija sustava: Integrate the pump into your system, ensuring that the liquid medium is non-corrosive and within the specified temperature limits.
Slika 5.1: Detailed dimensional drawing of the JIAYIN JYPC-7A pump, showing measurements for installation planning.
6. Operacija
Once installed, the JIAYIN JYPC-7A pump operates by converting electrical energy into mechanical energy to move liquid. The pump is designed for intermittent duty (ID2/1min), meaning it should operate for a maximum of 2 minutes followed by a minimum of 1 minute rest to prevent overheating and ensure optimal performance and lifespan.
- Uključivanje: Apply power to the pump. The pump will begin to draw and transfer liquid.
- Praćenje: Observe the flow rate and pressure to ensure it meets your application requirements.
- Radni ciklus: Adhere strictly to the ID2/1min duty cycle. Continuous operation beyond recommended limits can lead to premature failure.
- Razina tekućine: Ensure the liquid source does not run dry, as dry running can damage the pump. The pump is capable of drawing water from a height of 20cm within 10 seconds.
7. Održavanje
The JIAYIN JYPC-7A pump is designed for low maintenance, featuring materials that resist rust and clogging. However, regular checks can help ensure its continued reliable operation:
- Redoviti pregled: Periodically inspect the pump and connections for any signs of wear, leaks, or damage.
- Čistoća: Ensure the pump and surrounding area are kept clean and free from debris that could obstruct airflow or clog the inlet/outlet.
- Liquid Quality: Always use clean, non-corrosive liquids to prevent internal damage and maintain performance.
- Skladištenje: If storing the pump for an extended period, ensure it is drained of liquid and stored in a dry, temperate environment.
8. Rješavanje problema
If you encounter issues with your JIAYIN JYPC-7A pump, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Pumpa se ne pokreće | Nema napajanja Neispravno ožičenje Unutarnja greška | Provjerite priključak za napajanje i osigurač Provjerite ožičenje prema dijagramu Contact support if wiring is correct |
| Nizak ili nikakav protok | Clogged inlet/outlet Zrak u sustavu Insufficient liquid source Damaged impeller/valve | Pregledajte i očistite sve blokade Ispustite zrak iz sustava Ensure adequate liquid supply Kontaktirajte podršku |
| Pretjerana buka/vibracije | Labava montaža Zrak u sustavu Unutarnja opstrukcija | Zategnite pričvrsne vijke Ispustite zrak iz sustava Inspect for foreign objects (disconnect power first) |
| Pregrijavanje pumpe | Prekoračenje radnog ciklusa High ambient/medium temperature Loša ventilacija | Adhere to ID2/1min duty cycle Ensure operating within specified temperature limits Improve ventilation around the pump |
Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.
9. Jamstvo i podrška
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase. When contacting support, please have your product model (JYPC-7A) and purchase date available.