Lepro PR410082-RGB-JP
Lepro 5m RGB LED Strip Light Instruction Manual
Model: PR410082-RGB-JP
Uvod
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Što je u kutiji
Prije početka instalacije provjerite jesu li sve komponente prisutne:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Daljinski upravljač x 1
- Instruction Manual (Japanese) x 1
Sigurnosne informacije
- Ovaj proizvod je dizajniran za samo za unutarnju upotrebuNe izlagati vodi ili visokoj vlazi.
- Provjerite je li napajanje isključeno prije instalacije ili održavanja.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Nemojte oštro savijati LED traku ili primjenjivati pretjeranu silu, jer to može oštetiti strujni krug.
- Čuvati izvan dohvata djece.
- Ako je bilo koji dio proizvoda oštećen, odmah prekinite korištenje i obratite se podršci.
Postavljanje
Za pravilnu ugradnju LED trake slijedite ove korake:
- Pripremite površinu: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Mjerenje i rezanje (opcionalno): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Bilješka: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Nanesite traku: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Spojite komponente: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Uključivanje: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Upute za rad
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Funkcije daljinskog upravljača:
- Uključivanje/isključivanje: Pritisnite tipku crveni gumb za napajanje to turn the lights on or off.
- Podešavanje svjetline: Koristite tipke sa strelicama gore i dolje (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Odabir boja: Odaberite između 20 unaprijed postavljenih boja by pressing the corresponding color buttons.
- DIY načini rada: The DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Dinamički načini rada:
- BRZO/SPORE: Adjust the speed of dynamic modes.
- AUTOMOBIL: Cycles through all dynamic modes automatically.
- BLJESAK: Bljeska kroz boje.
- SKOK3/SKOK7: Jumps between 3 or 7 colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
Održavanje
- Čišćenje: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Skladištenje: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Njega ljepila: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| LED traka ne svijetli. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Baterija daljinskog upravljača je prazna. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Daljinski upravljač ne reagira. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Baterija daljinskog upravljača je prazna. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Zamijenite bateriju daljinskog upravljača. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Tehnički podaci
- Broj modela: PR410082-RGB-JP
- Marka: Guba
- Vrsta izvora svjetla: LED (SMD5050)
- LED količina: 150 LEDs (30 LEDs per meter)
- Dužina trake: 5 metara
- Potrošnja energije: 18 W
- Ulazni voltage: DC12V 1.5A
- Mogućnosti boja: RGB (20 preset colors + DIY modes)
- Metoda kontrole: IR daljinski upravljač s 44 tipke
- Unutarnja/vanjska upotreba: Zatvoreni
- Posebne karakteristike: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Veličina paketa: 13.1 x 10.7 x 6.7 cm; 230 g
Jamstvo i podrška
This Lepro LED Strip Light comes with a Jamstvo 2 godine. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.