ABB AD1NO-R-15m Modular Device Switch User Manual

1. Uvod

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Slika 1: Prednja strana view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Važne sigurnosne upute

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Instalaciju i održavanje smije obavljati samo kvalificirano osoblje.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Osigurajte da su sve žice u skladu s lokalnim i nacionalnim električnim propisima i propisima.
• Ne koristite uređaj ako izgleda oštećeno.
• Ovaj uređaj je namijenjen za unutarnju upotrebu u suhim okruženjima.

3. Proizvod je gotovview

The AD1NO-R-15m is an analog time switch with the following key features:

• Analogni brojčanik: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Upravlja jednim električnim krugom.
• Rezerva snage: Maintains timekeeping for a specified duration during power interruptions.
• Modularni dizajn: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Postavljanje i instalacija

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Prekid napajanja: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage tester.
2. Montaža: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Ožičenje:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Obnova napajanja: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Upute za rad

To set the time and program the switching schedule:

1. Postavi trenutno vrijeme: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. Održavanje

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Čišćenje: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Inspekcija: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Uvjeti okoliša: Osigurajte da radno okruženje ostane unutar navedenih raspona temperature i vlažnosti kako biste spriječili oštećenja.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, jer će to poništiti jamstvo i može vas izložiti električnim opasnostima.

7. Rješavanje problema

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Tehničke specifikacije

• Model: AD1NO-R-15m
• Broj dijela: 2CSM222461R1000
• Proizvođač: Sl
• Tip: Analogni vremenski prekidač
• Switching Interval: 15 minuta
• Kanali: 1 Normalno otvoren (NE)
• Rezerva snage: Da
• Težina artikla: Otprilike 2.82 unci (80 grama)
• Dimenzije proizvoda: Približno 3.54 x 0.69 x 2.6 inča (90 x 17.5 x 66 mm)
• Vrsta montaže: DIN Rail (Wall Mount)
• Uključene komponente: Modular device switch
• Potrebne baterije: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Prvo dostupno: 21. prosinca 2024

Napomena: Specifikacije su podložne promjenama bez prethodne najave.

9. Jamstvo i podrška

Informacije o jamstvu

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webstranicu. Sačuvajte dokaz o kupnji za slučaj reklamacije.

Korisnička podrška

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webweb-mjesto ili kontaktne podatke navedene u pakiranju proizvoda.

Službenik ABB-a Webstranica: www.abb.com