Youmile Micro USB Humidifier Module (Model JK-YM-163) Instruction Manual

Uvod

This instruction manual provides comprehensive guidance for the Youmile Micro USB Humidifier Module, model JK-YM-163. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance. This module is designed for various DIY humidification and atomization projects.

Proizvod gotovview

The Youmile Micro USB Humidifier Module is a compact 5V ultrasonic atomization circuit board designed to generate fine mist. It operates by converting electrical energy into high-frequency mechanical vibrations, which then atomize water into a fine spray. This module is suitable for integration into small humidifiers, aroma diffusers, and other similar applications.

Ključne karakteristike:

• Integrated driver circuit with ON trigger function.
• High-frequency 108 kHz oscillator for efficient atomization.
• Micron-sized aperture for fine mist production.
• Enameled surface on the atomized sheet for durability.
• Micro USB power input for convenient connectivity.

Slika 1: The Youmile Micro USB Humidifier Module, showing the main PCB and the connected ultrasonic atomizer disc. The PCB includes the micro USB port and control components.

Sadržaj paketa

Sljedeće stavke su uključene u vaš paket:

• 1 x Micro USB Humidifier Module (PCB with driver circuit)
• 1 x Humidifier Support (for the atomizer disc)
• 3 x 10mm Cotton Swabs (wicking material)
• 1 x Micro to USB Cable (for power supply)

Tehnički podaci

Slika 2: Detailed dimensions of the humidifier module, atomizer disc, and cotton swab for integration planning.

Upute za postavljanje

Follow these steps to set up your Youmile Micro USB Humidifier Module:

Identifikacija komponente:

Slika 3: Diagram identifying key components on the humidifier module PCB, including the inductor, atomizer socket, work indicator, controller, and Micro USB port.

1. Connect the Atomizer: Plug the atomizer disc's two-pin connector into the "Atomizer Socket" on the PCB. Ensure correct polarity if indicated (usually red wire to positive, black to negative).
2. Insert Cotton Swab: If using the humidifier support, insert one of the provided 10mm cotton swabs into the support. Ensure it is fully saturated with water before operation.
3. Position the Atomizer: Place the atomizer disc into the humidifier support, ensuring the white piezoelectric ceramic ring surface (spraying surface) faces upwards. The steel sheet surface (suction surface) should face downwards, towards the water source.
4. Priključak za napajanje: Connect the provided Micro USB cable to the Micro USB port on the module. Connect the other end of the USB cable to a 5V DC power source (e.g., USB charger, power bank, computer USB port).
5. Izvor vode: Ensure the cotton swab or atomizer disc is in direct contact with the water source for proper mist generation.

Važne napomene:

• The white piezoelectric ceramic ring surface is the spraying surface and should be installed facing upwards.
• The entire steel sheet surface is the suction surface and should be installed facing downwards, towards the water.
• For continuous atomization without pressing the switch, the left and right solder points of the switch on the PCB can be soldered together. This will enable atomization immediately upon power-on.

Slika 4: Illustration showing the anti-vibration rubber ring, piezoelectric ceramic ring, and waterproof welding point of the atomizer. Also depicts an alternative wiring method for direct power supply without Micro USB, connecting wires to the positive and negative solder points on the PCB.

Upute za rad

Once the module is set up and connected to a power source:

1. Uključivanje: If the switch solder points are not bridged, press the button on the PCB to activate the atomization function. If they are bridged, the module will start atomizing automatically upon power connection.
2. Observe Mist: A fine mist should begin to emanate from the atomizer disc. The work indicator LED on the PCB may illuminate.
3. Isključivanje: To stop atomization, disconnect the Micro USB power cable or press the button again if it functions as a toggle switch.

Slika 5: The humidifier module fully assembled with the cotton swab and support, actively producing mist. An inset shows the atomizer disc generating mist from a small container.

Prijave

This versatile module can be used in various applications, including:

• DIY USB humidifiers
• Medical humidifiers
• Perfume sprayers
• Aromatherapy atomizers
• Automotive parts (e.g., car humidifiers)
• Small-scale industrial humidification

Slika 6: Collage showing various applications of the humidifier module, including misting from a sponge, integration into a bottle-top humidifier, use in portable USB humidifiers, and direct misting from a cup.

Održavanje

To ensure the longevity and optimal performance of your humidifier module:

• Clean the Atomizer Disc: Periodically clean the surface of the atomizer disc to prevent mineral buildup, which can reduce mist output. Use a soft cloth and mild descaling solution if necessary. Avoid abrasive materials.
• Replace Cotton Swabs: If using cotton swabs, replace them regularly, especially if you notice reduced mist or discoloration. Ensure new swabs are fully saturated before use.
• Kvaliteta vode: Use clean, distilled, or demineralized water to minimize mineral buildup on the atomizer disc.
• Skladištenje: When not in use for extended periods, disconnect power, clean the module, and store it in a dry, cool place.

Rješavanje problema

If you encounter issues with your humidifier module, refer to the following common problems and solutions:

Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera:

• Do not operate the module without water. Dry operation can damage the atomizer disc.
• Provjerite je li napajanje unutar navedenog volumenatage raspon (DC 4.5V-5.0V).
• Keep the module away from children and pets.
• Avoid touching the atomizer disc directly when it is operating, as it vibrates at high frequency.
• Do not immerse the PCB in water. Only the atomizer disc is designed for contact with water.
• Isključite napajanje prije bilo kakvog održavanja ili čišćenja.

podrška

For further assistance or inquiries regarding the Youmile Micro USB Humidifier Module (Model JK-YM-163), please refer to the retailer where the product was purchased or visit the official Youmile support channels if available.