LEDVANCE Linear LED Shelf Light 400mm

1. Uvod

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Molimo vas da prije instalacije pažljivo pročitate ovaj priručnik i sačuvate ga za buduću upotrebu.

2. Sigurnosne upute

• Električna sigurnost: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Namjena: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• IP44 ocjena: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Izvor svjetla: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Rukovanje: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Čišćenje: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Priključni pribor

4. Specifikacije

Napomena: Specifikacije se mogu promijeniti bez najave.

5. Postavljanje i instalacija

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Pripremite područje instalacije: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Odspojite napajanje: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Označite točke bušenja: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Izbušite rupe: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Pričvrstite montažne nosače: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Električni priključak: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Montirajte učvršćenje: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Vrati snagu: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Upute za rad

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Automatski rad: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Automatsko isključivanje: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Položaj senzora: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Održavanje

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Čišćenje: Za čišćenje uređaja, provjerite je li napajanje isključeno. Obrišite površinu mekom, suhom ili blago natopljenom krpom.amp krpom. Nemojte koristiti jake kemikalije, abrazivna sredstva za čišćenje ili sprejeve izravno na uređaju.
• Inspekcija: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Izvor svjetla: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Rješavanje problema

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Svjetlo se ne pali:
  • Provjerite je li napajanje spojeno i je li osigurač uključen.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Svjetlo svijetli neprestano:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Bljeskovi ili treperenja svjetla:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Osigurajte voltagNapajanje je stabilno i unutar navedenog raspona (240 V).

Ako ovi koraci ne riješe problem, obratite se korisničkoj podršci.

9. Jamstvo i podrška

This LEDVANCE Linear LED Shelf Light comes with a Jamstvo 2 godine od datuma kupnje, pokrivajući nedostatke u materijalu i izradi pri normalnoj uporabi.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.