DF64 II Single Dosing Coffee Grinder

Uvod

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your MiiCoffee DF64 II Single Dosing Coffee Grinder. Please read this manual thoroughly before first use and retain it for future reference.

Figure 1: MiiCoffee DF64 II Single Dosing Coffee Grinder.

Sigurnosne informacije

Uvijek slijedite osnovne sigurnosne mjere pri korištenju električnih uređaja kako biste smanjili rizik od požara, strujnog udara i/ili ozljeda osoba, uključujući sljedeće:

• Pročitajte sve upute.
• Do not immerse the grinder in water or other liquids.
• Isključite utikač iz utičnice kada nije u upotrebi, prije stavljanja ili skidanja dijelova i prije čišćenja.
• Izbjegavajte kontakt s pokretnim dijelovima.
• Ne radite s aparatom s oštećenim kabelom ili utikačem ili nakon što je uređaj u kvaru, pao ili na bilo koji način oštećen.
• Korištenje dodataka koje proizvođač ne preporučuje ili ne prodaje može uzrokovati požar, električni udar ili ozljede.
• Ne koristiti na otvorenom.
• Nemojte dopustiti da kabel visi preko ruba stola ili pulta ili da dodiruje vruće površine.
• Ne stavljajte na ili blizu vrućeg plinskog ili električnog plamenika ili u zagrijanu pećnicu.
• Nemojte koristiti uređaj za druge namjene osim namijenjene.

Postavljanje

Raspakiranje i komponente

Pažljivo izvadite sve komponente iz pakiranja. Provjerite jesu li svi dijelovi prisutni:

• DF64 II Grinder Unit
• 58mm Aluminum Dosing Cup
• Blow-out Funnel with Lid
• Kabel za napajanje
• Upute za uporabu (ovaj dokument)

Plasman

Place the grinder on a stable, flat, and dry surface. Ensure there is adequate space around the unit for ventilation and ease of use.

Početno čišćenje

Prije prve upotrebe obrišite vanjski dio mlinca čistim sredstvom.amp cloth. The dosing cup and blow-out funnel can be washed with warm, soapy water and thoroughly dried. Do not wash the main grinder unit or burrs with water.

Upute za rad

Podešavanje mljevenja

The DF64 II features a stepless grind adjustment mechanism, allowing for precise control over your grind size. The redesigned dial, wrapped with chrome, makes adjustments easy. Rotate the top collar to adjust the grind fineness. Finer settings are typically used for espresso, while coarser settings are for filter coffee.

Figure 2: Stepless grind adjustment dial.

Single Dosing and Zero Retention

This grinder is designed for true single dosing with less than 0.1 gram retention. For optimal results, use the included blow-out funnel with its lid to completely empty the dead space after grinding.

Proces mljevenja

1. Ensure the grinder is plugged into a suitable power outlet.
2. Adjust the grind setting to your desired fineness.
3. Place the 58mm aluminum dosing cup under the chute.
4. Add your desired amount of whole coffee beans into the top opening.
5. Press the power button to start grinding.
6. Once grinding is complete, use the blow-out funnel by pressing down on it to clear any remaining grounds from the chute.

Plasma Generator (Ionizer)

The integrated plasma generator inside the exit chute helps to reduce static electricity during grinding, resulting in less mess and more consistent dosing.

Figure 3: Plasma Generator location within the grinder's exit chute.

Anti-Popcorn Disc

The integrated anti-popcorn disc prevents coffee beans from jumping during grinding, ensuring a smoother and faster grinding process.

Figure 4: Anti-Popcorn Disc inside the grinder.

Održavanje

Čišćenje brusilice

Redovito čišćenje osigurava optimalne performanse i dugotrajnost vašeg mlina.

• Dnevno čišćenje: After each use, use the blow-out funnel to clear the chute. Wipe down the exterior with a dry or slightly damp tkanina.
• Tjedno čišćenje: Unplug the grinder. Remove the dosing cup and clean it with warm, soapy water. Allow it to dry completely. Use a brush or vacuum cleaner to remove any loose coffee grounds from the burrs and chute area.
• Deep Cleaning (Monthly/As Needed): For a more thorough cleaning, you may need to remove the burrs. Refer to online resources or contact MiiCoffee support for detailed instructions on burr removal and cleaning. Always ensure the grinder is unplugged before attempting any deep cleaning.

Burr Care and Replacement

The DF64 II comes with custom-made 64mm stainless steel flat burrs. These burrs are durable, but their lifespan depends on usage and coffee type. Burrs can be upgraded to SSP burrs for different coffee tastes and enhanced performance.

Figure 5: 64mm Flat Burrs.

Rješavanje problema

Tehnički podaci

• Model: DF64 II
• Veličina čičaka: 64mm Flat Burrs (Stainless Steel)
• Podešavanje mljevenja: Bez koraka
• Zadržavanje: True Zero Retention (<0.1 gram)
• Statičko smanjenje: Plasma Generator (Ionizer)
• Dozirna čašica: 58 mm aluminij
• Dimenzije: 9.84 cm D x 5.12 cm Š x 11.81 cm V
• Težina: 15 funti
• Voltage: 230 Volts (Note: Voltage may vary by region, refer to product label)
• UPC: 860001850321

Jamstvo i podrška

MiiCoffee provides a full 1-year warranty from the date of purchase within the US. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, alteration, neglect, or unauthorized repair.

For warranty claims, technical support, or general inquiries, please contact MiiCoffee customer service through the retailer where the product was purchased or visit the official MiiCoffee webstranica za kontakt podatke.

Molimo sačuvajte dokaz o kupnji radi potvrde jamstva.