AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Proizvod je gotovview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Ključne karakteristike:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Kompatibilnost s Micro ATX-om: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Specifikacije

3. Vodič za postavljanje

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Raspakiranje

1. Pažljivo izvadite kućište računala iz ambalaže.
2. Remove any protective films or internal packaging materials.
3. Postavite kućište na stabilnu, ravnu površinu.

3.2 Instalacija matične ploče

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Pričvrstite matičnu ploču pomoću priloženih vijaka.

3.3 Instalacija napajanja

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Pričvrstite napajanje vijcima sa stražnje strane kućišta.

3.4 Instalacija pogona za pohranu

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Remove the necessary expansion slot covers from the rear of the case.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Sustav hlađenja

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Upravljanje kabelima

Za organiziranje kabela koristite izreze za usmjeravanje kabela i točke za vezivanje iza ladice matične ploče. To poboljšava protok zraka i estetiku.

4. Upute za rad

4.1 Uključivanje/isključivanje

• To power on your PC, press the Vlast button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Vlast nekoliko sekundi.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• USB 3.0 priključak (x1): Za prijenos podataka velikom brzinom.
• USB 2.0 priključci (x2): Za spajanje perifernih uređaja.
• Utičnica za mikrofon: Za audio ulaz.
• HD Audio Jack: For audio output (headphones/speakers).
• Gumb za resetiranje: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Održavanje

Redovito održavanje pomaže u osiguravanju optimalnih performansi i dugovječnosti komponenti vašeg računala.

5.1 Čišćenje filtera za prašinu

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Opće čišćenje

• Obrišite vanjski dio kućišta mekom,amp tkanina. Izbjegavajte abrazivna sredstva za čišćenje.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Rješavanje problema

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Bez napajanja: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilatori se ne okreću/RGB ne radi: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Pregrijavanje: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Priključci na prednjoj ploči ne rade: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Jamstvo i podrška

7.1 Informacije o jamstvu

The AeroCool HEXFORMBKV2 PC case comes with a Jamstvo 2 godine for parts. Please retain your proof of purchase for warranty claims.

7.2 Tehnička podrška

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webmjestu ili pakiranju proizvoda.

• AeroCool Official Webstranica: www.aerocool.io
• E-pošta korisničke podrške: support@aerocool.io (Prample, please verify on official webweb mjesto)