LiNKFOR XUNVC191

LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3 Instruction Manual

Model: XUNVC191

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3. This device allows you to split a single digital optical audio source to three output devices simultaneously, enhancing your audio setup flexibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

Sadržaj paketa

Molimo provjerite jesu li svi dolje navedeni artikli uključeni u vaš paket:

  • 1x LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3
  • 1x Optical Cable (1 meter)
  • 1x USB kabel za napajanje
  • 1x korisnički priručnik
Package contents including the splitter, optical cable, USB cable, and manual
Figure 1: Contents of the LiNKFOR Digital Audio Splitter package. Shown are the splitter unit, a 1-meter optical cable, a USB power cable, and the user manual.

Značajke proizvoda

  • 1x3 Optical Audio Splitter: Divides one digital optical Toslink source to three output devices.
  • Podržani audio formati: Compatible with LPCM2.0, DTS, and Dolby-AC3. Note: Does not support 7.1CH Dolby Digital Plus / Dolby TrueHD.
  • Lossless & Long-Distance Transmission: Supports signal transmission up to 25 meters (82 feet) with minimal signal loss (<0.2dB/m) via fiber optic cable.
  • Dizajn protiv smetnji: Aluminijska legura casing ensures good anti-interference performance and heat dissipation.
  • LED indikator: Provides clear operational status.
  • Overvoltage Zaštita: Prevents damage to the splitter.
  • Široka kompatibilnost: Works with PS3, STB, Xbox, DVD players, Blu-ray players, HDTVs, and power amplifiri.

Proizvod gotovview

Familiarize yourself with the ports and indicators on your LiNKFOR Digital Audio Splitter.

Diagram of the LiNKFOR Digital Audio Splitter showing Micro USB power input, DC 5V input, Toslink IN port, LED indicator, and three Toslink OUT ports (OUT1, OUT2, OUT3).
Figure 2: Front and rear panel view of the splitter, highlighting the Micro USB power input, DC 5V power input, Toslink input, LED status indicator, and three Toslink output ports.
  • Micro USB / DC 5V: Ulaz za napajanje.
  • LED: Power/Status indicator.
  • U: Toslink optical audio input port.
  • OUT1, OUT2, OUT3: Toslink optical audio output ports.

Upute za postavljanje

Follow these steps to connect your LiNKFOR Digital Audio Splitter:

  1. Spojite izvor: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, Xbox, Blu-ray player) to the IN priključak na razdjelniku.
  2. Povežite izlazne uređaje: Use up to three Toslink optical cables to connect your audio receiving devices (e.g., soundbar, amplifier, headphones with optical input, Bluetooth optical transmitter, DAC audio converter) to the OUT1, OUT2, i OUT3 ports on the splitter.
  3. Uključivanje: Spojite priloženi USB kabel za napajanje na DC 5V or Mikro USB port on the splitter and then to a 5V USB power adapter (not included) or a USB port on your source device. The LED indicator will illuminate when power is supplied.
  4. Provjerite vezu: Ensure all cables are securely connected. Power on all connected devices.
Setup diagram showing a TV connected to the splitter, which then connects to a soundbar and a Bluetooth optical transmitter for headphones.
Slika 3: Nprample setup demonstrating how to connect a TV to the splitter, and then distribute the audio signal to a soundbar and a Bluetooth optical transmitter for wireless headphones.
Diagram illustrating the splitter's ability to support three types of output devices: a soundbar/digital amplifier, an optical Bluetooth transmitter, and a DAC audio converter.
Figure 4: The splitter supports simultaneous output to three different types of audio devices, such as a soundbar, a Bluetooth optical transmitter for headphones, and a Digital-to-Analog Converter (DAC).

Upute za rad

Once the splitter is set up, operation is straightforward:

  • Ensure all devices (source, splitter, and output devices) are powered on.
  • The splitter will automatically distribute the digital optical audio signal from the input source to all three connected output devices.
  • Adjust the volume on your individual output devices as needed.
  • The LED indicator on the splitter will remain lit, indicating proper power supply and operation.
Operativno view of the splitter connected to a TV, soundbar, and a headphone charging dock with optical input.
Figure 5: The splitter in operation, allowing audio from the TV to be simultaneously played through a soundbar and a pair of headphones connected via an optical input dock.

Održavanje

To ensure the longevity and optimal performance of your LiNKFOR Digital Audio Splitter, follow these maintenance guidelines:

  • Uređaj držite na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti, izvora topline i vlage.
  • Uređaj čistite mekom, suhom krpom. Nemojte koristiti tekuća ili aerosolna sredstva za čišćenje.
  • Avoid placing heavy objects on top of the splitter.
  • Ne pokušavajte sami otvarati ili popravljati uređaj. Za sve popravke obratite se kvalificiranom servisnom osoblju.
  • Kada se ne koristi dulje vrijeme, isključite adapter za napajanje.

Rješavanje problema

If you encounter issues with your splitter, please refer to the following common problems and solutions:

ProblemMogući uzrokOtopina
No audio output from any device.
  • No power to the splitter.
  • Neispravan kabelski priključak.
  • Source device not outputting optical audio.
  • Output device not configured correctly.
  • Ensure the USB power cable is connected and the LED is lit.
  • Check all Toslink cables are securely connected to the correct IN/OUT ports.
  • Verify your source device (TV, console) is set to output audio via Toslink/Optical.
  • Ensure your output devices (soundbar, amplifier) are set to receive audio from their optical input.
Audio output from some devices, but not others.
  • Faulty optical cable to specific output.
  • Output device not configured correctly.
  • Test the optical cable with another port or replace it.
  • Check the settings of the non-working output device.
Distorted or intermittent audio.
  • Damaged optical cable.
  • Unsupported audio format.
  • Labav spoj.
  • Zamijenite optički kabel.
  • Ensure the audio format is LPCM2.0, DTS, or Dolby-AC3. 7.1CH Dolby Digital Plus / Dolby TrueHD are not supported.
  • Provjerite jesu li svi spojevi čvrsti.
LED indikator je isključen.
  • Nema napajanja.
  • Faulty power cable or adapter.
  • Ensure the USB power cable is connected to a working 5V power source.
  • Isprobajte drugi USB kabel za napajanje ili adapter.

Tehnički podaci

ZnačajkaDetalj
Broj modelaXUNVC191
Ulazni1x Toslink optički
Izlaz3x Toslink optički
Podržani audio formatiLPCM2.0, DTS, Dolby-AC3
Maksimalna udaljenost prijenosa25 meters / 82 feet (with optical cable loss <0.2dB/m)
NapajanjeDC 5V (putem Micro USB-a)
Dimenzije (D x Š x V)61 x 57 x 16 mm
Težina140 grama
Materijal kućištaAluminijska legura
Zemlja podrijetlaKina
Image of the LiNKFOR Digital Audio Splitter held in a hand, illustrating its compact size and dimensions of 61x57x16mm.
Figure 6: The compact dimensions of the LiNKFOR Digital Audio Splitter, measuring 61 x 57 x 16 mm, made from aluminum alloy.

Jamstvo i podrška

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LiNKFOR webmjesto. Čuvajte račun za jamstvene zahtjeve.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.