Keychron K6 Pro bežična mehanička tipkovnica - korisnički priručnik

Uvod

The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.

Sadržaj paketa

Please verify that all items are present in your Keychron K6 Pro package:

• 1x potpuno sastavljena tipkovnica
• 1x Type-A do Type-C kabel
• 1x Mac and Windows Keycaps Set
• 1x izvlakač za ključeve
• 1x izvlakač prekidača
• 1x šesterokutni ključ
• 1x Screwdriver (located at the bottom of the box)

Postavljanje

1. Spajanje tipkovnice

The K6 Pro supports both wireless Bluetooth 5.1 and wired USB-C connections.

Bluetooth veza:

1. Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
2. On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
3. Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.

Žičana veza:

• Provjerite je li prekidač za način rada tipkovnice postavljen na 'Kabel'.
• Connect the keyboard to your computer using the provided USB-C cable.

2. Prekidač operativnog sustava

The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.

3. Punjenje tipkovnice

Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.

Operacija

1. Key Combinations (Fn Keys)

The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:

Fn1 + Keys:

Fn2 + Keys:

2. Prilagodba QMK/VIA

The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:

1. Spojite tipkovnicu s računalom putem USB-C kabela.
2. Download and install the VIA software or access the VIA web primjena.
3. Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.

3. Prekidači koji se mogu brzo mijenjati

The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches.

• Za uklanjanje prekidača, upotrijebite priloženi alat za izvlačenje prekidača kako biste ga lagano uhvatili i povukli prema gore.
• Za ugradnju novog prekidača, poravnajte pinove novog prekidača s otvorima na tiskanoj pločici i čvrsto pritisnite dok ne klikne na mjesto. Pazite da pinovi nisu savijeni.

4. Upravljanje RGB pozadinskim osvjetljenjem

The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.

Održavanje

1. Čišćenje tipkovnice

Za čišćenje tipkovnice prvo je isključite iz svih izvora napajanja. Upotrijebite meku krpu koja ne ostavlja dlačice, lagano natopljenuampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.

2. Zamjena prekidača i tipkovnice

As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.

Rješavanje problema

• Tipkovnica se ne povezuje putem Bluetootha: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
• Tipke ne reagiraju: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
• Problemi s pozadinskim osvjetljenjem: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
• QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web primjena.

Tehnički podaci

Jamstvo

The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron webstranicu ili se obratite korisničkoj podršci.

podrška

For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron webweb-mjesto. Također možete pronaći često postavljana pitanja i forume zajednice za dodatnu pomoć.

Službeni video proizvoda