SCULPFUN S30 5.5W laserski graver i rezač - korisnički priručnik

1. Važne sigurnosne informacije

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• Laserska sigurnost: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• Zaštita očiju: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• Ventilacija: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• Sigurnost materijala: Only engrave or cut materials specified as safe for laser processing. Avoid highly reflective, flammable, or unknown materials.
• Opasnost od požara: The laser can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Djeca i kućni ljubimci: Keep children and pets away from the operating area. This device is not a toy.
• Hitno zaustavljanje: Upoznajte se s položajem i radom tipke za zaustavljanje u nuždi.

2. Sadržaj paketa

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• Strujni adapter i kabel
• USB kabel
• Laserske zaštitne naočale
• Tool Kit (wrenches, hex keys)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• Korisnički priručnik (ovaj dokument)

3. Vodič za postavljanje

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. Raspakirajte komponente: Pažljivo izvadite sve dijelove iz pakiranja i provjerite sadržaj pakiranja prema popisu.
2. Sastavite okvir: Spojite aluminijski profesionalacfiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. Spojite ožičenje: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. Priključak za napajanje: Spojite adapter za napajanje na graver, a zatim na odgovarajuću utičnicu.
7. Instalacija softvera: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. Upute za rad

Ovaj odjeljak daje opći pregledview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

Image: Various examples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. Pripremite radni prostor: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. Povežite se s računalom: Spojite graver s računalom putem USB kabela.
3. Uključivanje: Turn on the power switch on the engraver.
4. Pokretanje softvera: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. Dizajn opterećenja: Import your desired image or design file u softver.
6. Podesite postavke: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. Focus Laser: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. Materijal pozicije: Use the software to jog the laser head and confirm the engraving area on your material.
9. Početak operacije: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. Isključivanje: Once complete, power off the engraver and disconnect it from the computer.

5. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• Čista leća: Povremeno čistite lasersku leću mekom krpom koja ne ostavlja dlačice i otopinom za čišćenje leća kako biste održali snagu i preciznost lasera.
• Očistite tračnice i kotače: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• Podmažite pokretne dijelove: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• Provjerite remene: Provjerite zupčaste remene na napetost i istrošenost. Po potrebi ih podesite ili zamijenite.
• Vijek trajanja laserskog modula: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. Rješavanje problema

Ako naiđete na probleme sa svojim SCULPFUN S30, pogledajte sljedeće uobičajene probleme i rješenja:

• Nema laserskog izlaza:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Verify laser power settings in the software.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Uređaj se ne povezuje s računalom:
  • Provjerite priključak USB kabela.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• Inaccurate Engraving/Cutting:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. Specifikacije

8. Jamstvo i podrška

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN webmjesto.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN webstranica: www.sculpfun.com