Amazon Basics Bežični punjivi odvijač Korisnički priručnik

1. Uvod

Thank you for choosing the Amazon Basics Cordless Rechargeable Screwdriver. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.

Slika 1: Nadview of the Amazon Basics Cordless Rechargeable Screwdriver with key features highlighted, including torque settings, LED light, USB-C charging port, and 1/4" quick change collet.

2. Sadržaj paketa

Ensure all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

• 1 x Amazon Basics 3.6V (4V max.) Cordless Screwdriver
• 1 x Integrated 2000 mAh Lithium-ion Rechargeable Battery (pre-installed)
• 1 x USB-C kabel za punjenje
• 1 x 10-piece Bit Set (including various Phillips, Slotted, and Pozidriv bits)

Slika 2: The complete package contents, showing the cordless screwdriver, USB-C charging cable, and the 10-piece bit set with a bit holder.

3. Sigurnosne informacije

Uvijek slijedite osnovne sigurnosne mjere pri korištenju električnih alata kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda.

Opća sigurnosna pravila:

• Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
• Električna sigurnost: Izbjegavajte kontakt tijela s uzemljenim površinama (npr. cijevima, radijatorima, štednjacima, hladnjacima). Ne izlažite električne alate kiši ili vlazi.
• Osobna sigurnost: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za svoju primjenu. Ne koristite električni alat ako ga prekidač ne uključuje i ne isključuje. Isključite utikač iz izvora napajanja i/ili bateriju iz električnog alata prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnog alata.
• Upotreba i održavanje baterijskog alata: Punite samo punjačem koji je odredio proizvođač. Koristite električne alate samo s posebno namijenjenim baterijskim paketima.

4. Postavljanje

4.1 Punjenje odvijača

The screwdriver comes with an integrated rechargeable Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the USB-C charging port on the screwdriver (usually at the base or side).
2. Connect the provided USB-C charging cable to the screwdriver's charging port.
3. Connect the other end of the USB-C cable to a compatible USB power adapter (not included, 5V max. 1A recommended) or a USB port on a computer.
4. The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
5. Charging is easy via USB anywhere.

Slika 3: The USB-C charging cable and the 10-piece bit set, essential accessories for the screwdriver's operation and maintenance.

4.2 Ugradnja/izmjena bitova

The screwdriver features a 1/4" quick change hexagonal collet for fast and easy bit changes.

1. Ensure the screwdriver is turned off and not operating.
2. Insert the desired 1/4" hexagonal screwdriver bit firmly into the collet until it clicks into place.
3. To remove a bit, pull it straight out from the collet.

5. Upute za rad

5.1 Powering On and Direction Control

The screwdriver is operated by pressing the forward or reverse buttons.

Slika 4: Vrh view of the screwdriver highlighting the forward and reverse buttons, and the torque setting indicator.

• Pritisnite tipku naprijed gumb (usually indicated by an arrow pointing right or forward) to drive screws.
• Pritisnite tipku reverse button (usually indicated by an arrow pointing left or backward) to remove screws.
• Otpustite gumb da biste zaustavili odvijač.

5.2 Postavke zakretnog momenta

The screwdriver offers 3 adjustable torque settings (low, medium, high) to suit different applications and prevent overtightening or stripping screws.

• Press the torque adjustment button (often labeled "MAX" or with a torque icon) to cycle through the settings.
• Select a lower torque for delicate materials or small screws, and a higher torque for tougher materials or larger screws.
• Maksimalni okretni moment je 5 Nm.

5.3 Integrated LED Lights

Two integrated LED lights illuminate the work area, improving visibility in low-light conditions.

• The LED lights typically activate automatically when the screwdriver is in operation.

Slika 5: The cordless screwdriver being used to install a hinge on a cabinet, demonstrating its compact size and utility in tight spaces.

6. Održavanje

6.1 Čišćenje

• Always disconnect the tool from any charging source before cleaning.
• Obrišite vanjski dio alata mekom krpomamp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Ventilacijske otvore držite čistima od prašine i ostataka.

6.2 Skladištenje

• Odvijač čuvajte na suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
• Ensure the battery is partially charged before long-term storage to maintain battery health.
• Čuvati izvan dohvata djece.

7. Rješavanje problema

8. Specifikacije

Slika 6: The product label on the underside of the screwdriver, displaying model number, voltage, i detalje proizvodnje.

9. Jamstvo i podrška

This Amazon Basics product is covered by a 5-godišnje jamstvo na alat. For warranty claims or technical support, please contact Amazon customer service. Information regarding spare parts availability is currently not provided.

For returns, the standard return policy allows for refunds or replacements within 30 days, as per Amazon's policy.

Za dodatnu pomoć posjetite Osnovna trgovina Amazon.