CREWORKS SX-DUCV106

CREWORKS Ultrasonic Cleaner

Model: SX-DUCV106

korisnički priručnik

Uvod

This manual provides instructions for the safe and efficient operation of your CREWORKS Ultrasonic Cleaner, Model SX-DUCV106. This device utilizes ultrasonic cavitation to thoroughly clean various items, including vinyl records, jewelry, glasses, and more. Please read this manual carefully before use and retain it for future reference.

Before and after cleaning a vinyl record with the CREWORKS Ultrasonic Cleaner, showing significant dirt removal.

Image: Before and After Cleaning Demonstration

Sigurnosne upute

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može uzrokovati strujni udar, požar ili teške ozljede.

  • Only use with grounded electrical outlets.
  • Ne rastavljajte uređaj. Za sve servisne radove obratite se kvalificiranom osoblju.
  • Do not operate the unit without water in the tank. Ensure the water level is between the MIN and MAX marks.
  • Do not use flammable, explosive, or corrosive cleaning solutions.
  • Izbjegavajte dodirivanje električnih komponenti mokrim rukama.
  • Držite jedinicu dalje od djece i kućnih ljubimaca.
  • Ensure proper ventilation during operation, as the unit can generate heat.
  • Isključite uređaj iz izvora napajanja prije čišćenja ili održavanja.

Komponente proizvoda

The CREWORKS Ultrasonic Cleaner package includes the following items:

  • Ultrasonic Cleaner Unit with Stainless Steel Tank
  • Poklopac
  • Kabel za napajanje
  • Cleaning Basket (for small items)
  • Vinyl Record Washing Rack (holds up to three 7" or 12" records)
  • Vinyl Record Drying Rack
  • Odvodni ventil
All components of the CREWORKS Ultrasonic Cleaner laid out, including the main unit, lid, power cord, cleaning basket, record washing rack, and drying rack.

Image: Included Components

Postavljanje

  1. Place the ultrasonic cleaner on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
  2. Close the drain valve securely.
  3. Fill the stainless steel tank with water. For enhanced cleaning, a small amount of appropriate cleaning solution can be added. Do not exceed the maximum fill line.
  4. Connect the power cord to the unit and then to a grounded electrical outlet.
The CREWORKS Ultrasonic Cleaner unit with its lid and control panel visible, ready for setup.

Image: Ultrasonic Cleaner Unit

Operacija

General Cleaning Procedure

  1. After filling the tank (see Setup), place the items to be cleaned into the cleaning basket. Ensure items are fully submerged but not touching the bottom of the tank.
  2. Place the cleaning basket into the tank.
  3. Set the desired cleaning time using the 'TIME +' and 'TIME -' buttons on the control panel. The timer can be set up to 30 minutes.
  4. Set the desired temperature using the 'TEMP +' and 'TEMP -' buttons. The heater can warm the solution up to 175°F (79°C). Heating can improve cleaning effectiveness for some items.
  5. Press the 'ON/OFF' button for the ultrasonic function to start cleaning. Press the 'ON/OFF' button for the heater function if heating is desired.
  6. The unit will automatically stop when the set time expires.
  7. Carefully remove the cleaning basket and rinse the cleaned items with clean water.

Vinyl Record Cleaning Procedure

  1. Assemble the vinyl record washing rack and place it over the tank.
  2. Carefully mount up to three 7-inch or 12-inch vinyl records onto the rack, ensuring the labels are protected from the cleaning solution.
  3. Lower the records into the tank, ensuring the grooves are submerged in the cleaning solution.
  4. Set the desired cleaning time and temperature as described in the General Cleaning Procedure.
  5. Start the ultrasonic cleaning and heating functions.
  6. Once cleaning is complete, carefully lift the records from the tank.
  7. Place the cleaned records onto the included drying rack to air dry completely before storage or playback.
The CREWORKS Ultrasonic Cleaner with vinyl records mounted on the washing rack, submerged in the cleaning tank.

Image: Vinyl Records in Cleaning Rack

A white plastic drying rack designed to hold multiple vinyl records upright for air drying.

Image: Record Drying Rack

Upravljačka ploča gotovaview

Digitalna upravljačka ploča omogućuje precizno podešavanje parametara čišćenja.

  • SET TEMP (°C) / ACTUAL TEMP (°C): Displays the set temperature and the current actual temperature of the solution.
  • TEMP + / TEMP -: Tipke za povećanje ili smanjenje ciljane temperature.
  • ON/OFF (Heater): Aktivira ili deaktivira funkciju grijanja.
  • SET TIME (MINUTES SECONDS): Displays the set cleaning duration.
  • TIME + / TIME -: Buttons to increase or decrease the cleaning time.
  • ON/OFF (Ultrasonic): Aktivira ili deaktivira funkciju ultrazvučnog čišćenja.
Close-up of the CREWORKS Ultrasonic Cleaner's digital control panel, showing buttons for temperature and timer settings, and warning labels.

Image: Digital Control Panel

Održavanje

  1. Pražnjenje spremnika: After each use, especially if using cleaning solutions, drain the tank by opening the drain valve. Place a container underneath to collect the liquid.
  2. Čišćenje spremnika: Rinse the stainless steel tank with clean water. Wipe the interior and exterior surfaces with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili čeličnu vunu.
  3. Skladištenje: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.
  4. Redoviti pregled: Periodically check the power cord for any damage. Ensure the drain valve operates smoothly.

Rješavanje problema

ProblemMogući uzrokOtopina
Jedinica se ne uključuje.No power supply; Power cord not connected; Faulty outlet.Check power cord connection; Test outlet with another device; Ensure unit is plugged into a grounded outlet.
Ultrazvučna funkcija ne radi.Ultrasonic function not activated; Insufficient water in tank.Press the ultrasonic 'ON/OFF' button; Ensure water level is above MIN mark.
Heater not working or overheating.Heater function not activated; Sensor malfunction; Prolonged operation.Press the heater 'ON/OFF' button; Allow unit to cool down; If overheating persists, discontinue use and contact support.
Loši rezultati čišćenja.Incorrect cleaning solution; Insufficient cleaning time/temperature; Items not properly submerged.Use appropriate cleaning solution for item type; Increase cleaning time or temperature; Ensure items are fully submerged.
Uređaj je pretjerano bučan.Normal operation sound; Items touching tank walls.Some operational noise is normal for ultrasonic cleaners. Ensure items are in the basket and not directly touching the tank. Consider operating in a well-ventilated area away from sensitive ears.

Tehnički podaci

  • Model: SX-DUCV106
  • Kapacitet spremnika: 1.6 litre (6 litara)
  • Ultrazvučna snaga: 180 W
  • Snaga grijanja: Do 200W
  • Ultrazvučna frekvencija: 40 kHz
  • Postavke odbrojavanja: 0-30 minutes (Digital)
  • Postavke temperature: Up to 175°F (79°C) (Digital)
  • Materijal spremnika: Nehrđajući čelik 304
  • Dimenzije proizvoda: Otprilike 12.8 x 6.9 x 10.2 inča
  • Težina artikla: Otprilike 10.5 funti
Diagram showing the dimensions of the CREWORKS Ultrasonic Cleaner unit and the record drying rack.

Slika: Dimenzije proizvoda

Jamstvo i podrška

CREWORKS products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Please have your model number (SX-DUCV106) and purchase information ready when contacting support.

For the most up-to-date contact information, please visit the official CREWORKS webstranicu ili pogledajte dokumentaciju o kupnji.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.