1. Uvod
Thank you for choosing the InFocus P120 INL412 Multimedia Projector. This manual provides essential information for the safe and efficient operation of your projector. Please read it thoroughly before using the device and retain it for future reference. The InFocus P120 INL412 is designed for versatile multimedia presentations, offering clear and vibrant images for various applications.
2. Sigurnosne informacije
Kako biste osigurali siguran rad i spriječili oštećenje projektora, molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza:
- Ne blokirajte ventilacijske otvore. Osigurajte dovoljno prostora oko projektora za pravilan protok zraka kako biste spriječili pregrijavanje.
- Izbjegavajte gledati izravno u leću projektora kada je lamp je uključen, jer jaka svjetlost može oštetiti oči.
- Do not place the projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the unit.
- Isključite kabel za napajanje iz zidne utičnice ako se projektor neće koristiti dulje vrijeme.
- Za sve servisne radove obratite se kvalificiranom servisnom osoblju. Ne pokušavajte sami otvarati ili popravljati projektor.
- Keep the projector away from water or moisture. Do not expose it to rain or immerse it in liquid.
- Use only the power cord supplied with the projector or an authorized replacement.
3. Sadržaj paketa
Verify that all items listed below are included in your projector package:
- InFocus P120 INL412 Multimedia Projector
- Kabel za napajanje
- Daljinski upravljač s baterijama
- VGA kabel
- Korisnički priručnik (ovaj dokument)
- Kratki vodič za početak
4. Proizvod je gotovview
Familiarize yourself with the main components of your InFocus P120 INL412 projector.
Slika 1: Prednja strana view of the InFocus P120 INL412 Multimedia Projector, showing the lens and ventilation grilles.
4.1 Prednja ploča
- Objektiv za projekciju: Emituje sliku na ekran.
- Prsten za fokusiranje: Podešava jasnoću projicirane slike.
- Prsten za zumiranje: Podešava veličinu projicirane slike.
- IR prijemnik: Prima signale s daljinskog upravljača.
4.2 Gornja ploča
- Upravljačka ploča: Buttons for power, menu navigation, source selection, and keystone correction.
- Svjetlosni indikatori: Display the projector's status (e.g., power, lamp, temperature).
4.3 Stražnja ploča (povezivanje)
- HDMI ulaz: Connects to HDMI-enabled devices (laptops, Blu-ray players).
- VGA ulaz: Povezuje se s računalima s VGA izlazom.
- USB priključak: For service or connecting USB devices (if supported by model).
- Audio ulaz/izlaz: Za spajanje vanjskih audio izvora ili zvučnika.
- Ulaz za napajanje: Povezuje kabel za napajanje.
5. Postavljanje
Slijedite ove korake za početno postavljanje vašeg projektora:
- Plasman: Place the projector on a stable, flat surface or mount it securely. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size.
- Priključak za napajanje: Spojite kabel za napajanje na utičnicu za napajanje projektora, a zatim na uzemljenu električnu utičnicu.
- Povežite izvorni uređaj: Connect your source device (e.g., laptop, DVD player) to the projector using an appropriate cable (HDMI, VGA, etc.). Ensure the cable is securely connected to both the source and the projector.
- Uključivanje: Press the power button on the projector's control panel or the remote control to turn on the projector. The power indicator light will illuminate.
- Prilagodite fokus i zumiranje: Once an image is projected, rotate the focus ring on the lens until the image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.
- Korekcija trapezoida: If the image appears trapezoidal, use the keystone correction function (either via buttons on the projector/remote or through the on-screen menu) to square the image.
6. Upute za rad
6.1 Uključivanje/isključivanje
- Za uključivanje: Press the power button once. The projector will go through a warm-up sequence.
- Za isključivanje: Press the power button twice. The first press will prompt a shutdown confirmation; the second press will initiate shutdown. Allow the projector to cool down completely before unplugging.
6.2 Odabir izvora
Press the 'Source' button on the projector or remote control to cycle through available input sources (HDMI, VGA, etc.) until your desired source is displayed.
6.3 Navigacija izbornikom
Press the 'Menu' button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and 'Enter' or 'OK' to select. Use the 'Exit' or 'Menu' button to close the OSD.
- Postavke slike: Adjust brightness, contrast, color, aspect ratio, and picture mode.
- Postavke zaslona: Configure keystone, projection mode (front/rear, desktop/ceiling), and resolution.
- Audio postavke: Control volume and audio output options.
- Postavke sustava: Manage language, timer, power-saving modes, and factory reset.
7. Održavanje
Redovito održavanje osigurava optimalne performanse i produžuje vijek trajanja vašeg projektora.
- Čišćenje leća: Nježno obrišite leću projektora mekom krpom koja ne ostavlja dlačice, posebno namijenjenom za optičke površine. Nemojte koristiti abrazivna sredstva za čišćenje ili pretjeranu silu.
- Čišćenje kabineta: Use a soft, dry cloth to clean the projector's exterior. For stubborn marks, dampen the cloth slightly with water. Avoid using harsh chemicals.
- Čišćenje/zamjena zračnog filtera: Check the air filter periodically. If your model has a removable filter, clean it with a soft brush or vacuum cleaner. Replace the filter as recommended in the on-screen menu or when visibly dirty to maintain proper ventilation.
- Lamp Zamjena: Projektor lamp ima ograničen vijek trajanja. Kada lamp life indicator appears, or the image brightness significantly decreases, replace the lamp according to the instructions provided in the full service manual or by a qualified technician. Always allow the projector to cool down completely before attempting lamp zamjena.
8. Rješavanje problema
Uobičajene probleme i njihova rješenja potražite u donjoj tablici:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Nema prikazane slike | Power cord disconnected, incorrect input source, source device off. | Check power connections. Select correct input source. Ensure source device is powered on. |
| Slika je mutna | Lens out of focus, incorrect projection distance. | Adjust the focus ring on the lens. Reposition the projector closer or further from the screen. |
| Slika je trapezoidna | Projektor nije okomit na platno. | Use keystone correction (manual or automatic) to square the image. |
| Projektor se pregrijava i gasi | Začepljena ventilacija, prljav zračni filter. | Osigurajte slobodan prostor oko ventilacijskih otvora. Očistite ili zamijenite zračni filter. |
| Daljinski upravljač ne radi | Dead batteries, obstruction between remote and projector, incorrect angle. | Replace batteries. Ensure clear line of sight to IR receiver. Point remote directly at the projector. |
9. Specifikacije
Key technical specifications for the InFocus P120 INL412 Multimedia Projector:
| Značajka | Specifikacija |
|---|---|
| Broj modela | P120 INL412 (Item model number: 7296144) |
| Vrsta zaslona | DLP |
| Izvorna razlučivost | 1280 x 800 |
| Maksimalna razlučivost zaslona | 1280 x 800 |
| Tehnologija povezivanja | USB (and other standard inputs like HDMI, VGA) |
| Dimenzije proizvoda | 5.25 x 0.31 x 1.66 inča |
| Težina artikla | 6.6 funti |
| Proizvođač | U fokusu |
10. Jamstvo i podrška
The InFocus P120 INL412 Multimedia Projector comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty duration and coverage details. For technical support, service, or further inquiries, please visit the official InFocus support webstranici ili se obratite njihovom odjelu korisničke službe.
Za najnovije informacije o podršci posjetite: www.infocus.com/support