TM617 Digitalni vremenski prekidač Upute za uporabu

1. Uvod

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Slika 1: Prednja strana view of the TM617 Digital Time Switch.

2. Sigurnosne informacije

• Prije instalacije ili održavanja provjerite je li napajanje isključeno kako biste spriječili strujni udar.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Ne izlažite uređaj vlazi, ekstremnim temperaturama ili korozivnim okruženjima.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Provjerite svtage rating of the device (110V/220V) matches your power supply before connection.

3. Značajke proizvoda

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Funkcija ručnog premošćivanja.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Sadržaj paketa

Molimo provjerite sadržaj pakiranja nakon otvaranja:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Korisnički priručnik (ovaj dokument)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Postavljanje i instalacija

5.1 Montaža

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Dijagram ožičenja

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Ulazna snaga: Connect the 110V/220V AC power supply to the designated input terminals.
• Izlaz opterećenja: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Upute za rad

6.1 Funkcije gumba

• P (Program): Ulazi ili izlazi iz načina programiranja.
• D+ (Day): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Sat): Adjusts hour in setting mode; selects hour in program mode.
• M+ (Minuta): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Pritisnite za ulazak u način podešavanja vremena.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Postavljanje trenutnog vremena i dana

1. Pritisnite i držite Ikona sata dugme.
2. Dok držite Ikona sata, pritisnite D+ za postavljanje trenutnog dana u tjednu (PO, TU, SI, ČE, PET, SA, NE).
3. Dok držite Ikona sata, pritisnite H+ za postavljanje trenutnog sata.
4. Dok držite Ikona sata, pritisnite M+ za postavljanje trenutne minute.
5. Otpustite Ikona sata gumb za spremanje postavki.

6.3 Programiranje ciklusa UKLJUČENO/ISKLJUČENO

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Pritisnite tipku P jednom pritisnite tipku. Na zaslonu će se prikazati "1 UKLJUČENO".
2. Pritisnite D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Pritisnite H+ za postavljanje sata za prvi program UKLJUČENO.
4. Pritisnite M+ za postavljanje minute za prvi program UKLJUČENO.
5. Pritisnite tipku P button again. The display will show "1 OFF".
6. Ponovite korake 2-4 za postavljanje dana(a), sata i minute za prvi ISKLJUČENI program.
7. Nastavite pritiskati P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. Nakon što ste postavili sve željene programe, pritisnite tipku Ikona sata gumb za izlaz iz načina programiranja i povratak na prikaz trenutnog vremena.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Ručno nadjačavanje

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Pritisnite tipku Ručno nadjačavanje gumb za kruženje kroz načine rada:
• NA: Output is continuously ON, ignoring programs.
• AUTOMOBIL: Output follows programmed ON/OFF cycles.
• OFF: Output is continuously OFF, ignoring programs.
• Odaberite AUTO for normal operation based on your programmed schedule.

7. Održavanje

• Redovito čistite uređaj mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Rješavanje problema

9. Specifikacije

10. Jamstvo i podrška

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER webstranicu ili pogledajte pakiranje proizvoda.