Yaheetech 3-Drawer Nightstand Side Table Instruction Manual

Važne sigurnosne informacije

Molimo pažljivo pročitajte sve upute prije sastavljanja i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• Prije početka sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni.
• Nemojte previše zatezati vijke, jer to može oštetiti materijal.
• Do not overload the table or drawers. The maximum load capacity for the tabletop is 48 kg, and for each drawer is 6 kg.
• Nemojte stajati na stolu.
• Tijekom sastavljanja držite male dijelove dalje od djece kako biste spriječili opasnost od gušenja.
• Sastavite na mekoj, čistoj površini kako biste spriječili ogrebotine.

Popis dijelova

Verify that all components are included in your package. If any parts are missing or damaged, please contact customer support.

• Main Panels (Top, Bottom, Sides, Back)
• Drawer Panels (Front, Back, Sides, Bottom)
• Drawer Slides (Left and Right)
• Hardware (Screws, Dowels, Cam Locks, Knobs)
• Noge

Figure 1: All components included in the package, ready for assembly.

Upute za sastavljanje

Follow these steps carefully to assemble your Yaheetech 3-Drawer Nightstand. Refer to the included hardware and panel labels (e.g., A, B, C, D, E, F, G for hardware; 1-12 for panels) for identification.

Step 1: Prepare Drawer Panels

1. Insert cam lock screws (A) into the designated holes on the drawer front panels (Part 8).
2. Attach the side panels (Parts 9, 10) to the drawer front panel (Part 8) using dowels (D) and cam locks (C). Ensure the grooves for the drawer bottom are facing inwards and aligned.
3. Slide the drawer bottom panel (Part 12) into the grooves of the assembled drawer sides.
4. Attach the drawer back panel (Part 11) to complete the drawer box, securing it with dowels (D) and cam locks (C).
5. Insert the knob screw (F) from the inside of the drawer front panel (Part 8) and attach the metal knob (E) from the outside. Tighten securely.
6. Attach the drawer slides (H-2(R) and H-2(L)) to the outer sides of each assembled drawer using screws (G). Ensure the roller is at the front of the drawer.
7. Repeat these steps for all three drawers.

Figure 2: Assembled drawers with knobs and slides attached, demonstrating storage capacity.

Korak 2: Sastavite glavni okvir

1. Insert cam lock screws (A) into the designated holes on the top panel (Part 1) and bottom panel (Part 5).
2. Attach the main frame slides (H-1(L) and H-1(R)) to the inner sides of the side panels (Parts 2, 3) using screws (G). Ensure the roller is at the front of the nightstand.
3. Insert dowels (D) into the top of the legs (Parts 4, 6).
4. Attach the side panels (Parts 2, 3) to the bottom panel (Part 5) by aligning the dowels and cam lock screws. Secure with cam locks (C).
5. Slide the back panel (Part 7) into the designated grooves on the main frame.
6. Attach the top panel (Part 1) to the assembled frame, aligning the dowels and cam lock screws. Secure with cam locks (C).

Figure 3: Main frame assembly with overall dimensions.

Korak 3: Umetnite ladice

Carefully slide each assembled drawer into the main frame, aligning the drawer slides on the drawer with the slides on the frame. Push firmly until the drawer is fully seated. Test each drawer for smooth operation.

Figure 4: Fully assembled nightstand ready for use.

Upute za rad

The Yaheetech 3-Drawer Nightstand is designed for convenient storage and display in various settings.

• Ladice: The three drawers provide ample enclosed storage for personal items, books, chargers, and other essentials. Pull the metal knobs gently to open and push to close.
• Gornja površina: Koristite gornju površinu za postavljanje lamps, alarm clocks, decorative items, or beverages. Ensure items are placed stably.

Figure 5: Nightstand in a living room setup, demonstrating versatile use.

Održavanje i njega

Proper care will ensure the longevity and appearance of your nightstand.

• Čišćenje: The surface is designed to be scratch and water-resistant. For daily cleaning, simply wipe with a soft, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili jake kemikalije.
• Izlijevanje: Wipe up spills immediately to prevent moisture damage, especially on unsealed edges or inside drawers.
• Sunčeva svjetlost: Izbjegavajte dugotrajno izlaganje izravnoj sunčevoj svjetlosti kako biste spriječili blijeđenje ili promjenu boje završnog sloja.
• toplina: Ne stavljajte vruće predmete izravno na površinu. Koristite podmetače ili zaštitne jastučiće.
• Hardver: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovno zategnite.

Rješavanje problema

Ako naiđete na bilo kakve probleme s noćnim ormarićem, pogledajte sljedeća uobičajena rješenja:

• Klimavi stol: Check all leg and frame connections. Ensure all screws and cam locks are securely tightened. Adjust if necessary.
• Zalijepljene ladice:
  1. Ensure the drawer slides are properly aligned and free of obstructions.
  2. Verify that the drawer slides are securely attached to both the drawer and the main frame.
  3. Check if the drawer is overloaded. Remove some items to see if it improves.
• Oštećena površina: Za manje ogrebotine mogu se koristiti flomasteri za popravak ili setovi za popravak namještaja. Za značajna oštećenja obratite se korisničkoj podršci.

Tehnički podaci

Figure 6: Detailed dimensions of the nightstand.

Jamstvo i podrška

Za informacije o jamstvu ili korisničku podršku, molimo pogledajte kontaktne podatke navedene uz kupnju ili posjetite službenu web stranicu Yaheetech-a. webstranicu. Sačuvajte dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.