CAD Audio WX50 Digital Frequency Agile Single Channel UHF Handheld Wireless System User Manual

1. Uvod

The CAD Audio WX50 is a digital frequency agile single-channel UHF handheld wireless system designed for clear vocal pickup and reliable performance. This system offers plug-and-play simplicity with its QuickMic receiver, which connects directly into a mixer or amplifier's 1/4-inch jack. The handheld transmitter features a CADLive-style capsule for professional vocal clarity and includes built-in mute and battery indicators.

This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your WX50 wireless system.

Image 1: CAD Audio WX50 Handheld Wireless Microphone and QuickMic Receiver.

2. Sadržaj paketa

Prije nego što nastavite s postavljanjem, provjerite jesu li sve komponente prisutne:

• WX50 Handheld Transmitter (Microphone)
• QuickMic Receiver
• 1/4-inch to 1/8-inch Gold Adapter
• Power Cord (for receiver charging)
• No-slip Ring
• Pop filter
• 1 Lithium Ion Battery (included, typically pre-installed in transmitter)

3. Upute za postavljanje

3.1 Punjenje prijemnika

1. Locate the DC 5V Charging Port on the QuickMic Receiver.
2. Connect the provided power cord to the charging port and a suitable USB power source (not included).
3. The Charge Indicator LED will illuminate red while charging and turn green when fully charged.

3.2 Installing Batteries in the Transmitter

1. Unscrew the bottom cap of the handheld transmitter to access the battery compartment.
2. Umetnite priloženu litij-ionsku bateriju, pazeći na ispravan polaritet (+/-).
3. Securely screw the bottom cap back onto the transmitter.

3.3 Spajanje prijemnika

1. Plug the QuickMic Receiver directly into a 1/4-inch input jack on your mixer, amplifier, or PA system. If your input is 1/8-inch, use the provided 1/4-inch to 1/8-inch gold adapter.
2. Ensure the receiver is securely seated in the input.

3.4 Powering On and Frequency Selection

1. Press and hold the On/Off Switch on the QuickMic Receiver to power it on. The RF Indicator will light up.
2. Press and hold the On/Off Switch on the handheld transmitter to power it on. The Frequency Display will illuminate.
3. The system will automatically pair. If pairing does not occur, or if you experience interference, press the Frequency Selection Button on the handheld transmitter to cycle through available frequencies until a clear channel is found. The RF Indicator on the receiver will show red for Channel A and green for Channel B.

Image 2: Labeled diagram of the WX50 Handheld Transmitter and QuickMic Receiver components.

4. Upute za rad

4.1 Korištenje mikrofona

• Once powered on and paired, the microphone is ready for use.
• Speak directly into the top grille of the microphone for optimal sound pickup.
• Use the On/Off Mute Switch on the handheld transmitter to temporarily mute the microphone output without powering it down.

4.2 Praćenje vijeka trajanja baterije

• The handheld transmitter features a Low-Battery LED Indicator. This indicator will illuminate when the battery level is low, signaling that the battery needs to be charged or replaced soon.
• The QuickMic Receiver also has a Low Battery Indicator (red = needs charged, blue = on).

4.3 Bežični domet

The WX50 system offers a wireless range of approximately 50 meters (164 feet) under optimal conditions. Factors such as obstacles, other wireless devices, and environmental interference can affect the actual operating range.

Image 3: Key features of the CAD Audio WX50 system, including Frequency Agile Design, Low Battery Indicator, and 50m Wireless Range.

5. Održavanje

5.1 Njega baterija

• Recharge the receiver's battery when the charge indicator shows low.
• For the handheld transmitter, replace or recharge the Lithium Ion battery when the low-battery indicator activates.
• If storing the unit for an extended period, remove batteries from the transmitter to prevent leakage.

5.2 Čišćenje

• Wipe the microphone and receiver surfaces with a soft, dry cloth.
• Ne koristite jake kemikalije, otapala ili abrazivna sredstva za čišćenje.
• Periodically clean the pop filter and microphone grille to maintain audio quality.

5.3 Skladištenje

Store the WX50 system in a cool, dry place away from direct sunlight and extreme temperatures. Protect the components from dust and physical damage.

6. Rješavanje problema

If you encounter issues with your CAD Audio WX50 system, refer to the following common problems and solutions:

7. Specifikacije

Detailed technical specifications for the CAD Audio WX50 system:

• Naziv modela: WX50
• Tehnologija povezivanja: Pomoćni
• Vrsta priključka: 6.35 mm Jack (1/4 inch TRS)
• Boja: Crna
• Polarni uzorak: Jednosmjerno
• Forma mikrofona: Sustav mikrofona
• Izvor napajanja: Baterija (1 litij-ionska baterija uključena)
• Odnos signal / šum: 70 dB
• Broj kanala: 16
• Čujni šum: 70 decibela
• Materijal kućišta: Plastični
• Frekvencijski odziv: 20 Hz - 16 kHz
• Modulacija: High Definition Digital QPSK
• Snaga prijenosa: 10 mW
• Osjetljivost: -43dBV (6.8mV) @ 1Pa
• Frekvencijski pojas: 500 MHz - 599 MHz
• Trajanje baterije: >8 sati
• Dimenzije: 11" x 3.94" x 2.44" (28 cm x 10 cm x 6.2 cm)
• Težina artikla: 12 unci (0.34 kg)

Slika 4: Gotovoview of CAD Audio WX50 technical specifications.

Image 5: Information on WX50 battery life, dimensions, and weight.

8. Informacije o jamstvu

The CAD Audio WX50 Digital Frequency Agile Single Channel UHF Handheld Wireless System is covered by a 2-godišnje jamstvo proizvođača. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please refer to the official CAD Audio webstranicu ili se obratite njihovoj korisničkoj podršci.

9. Podrška

For further assistance, technical support, or inquiries regarding your CAD Audio WX50 system, please visit the official CAD Audio webweb-mjesto ili se obratite njihovoj službi za korisnike. Kontaktne podatke obično možete pronaći na proizvođačevoj webmjesto ili pakiranje proizvoda.