1. Uvod
This manual provides essential information for the safe and effective installation, operation, and maintenance of the JIAYIN JYPC-4 Series Electromagnetic Plunger Pump. This pump is designed for applications requiring precise water suction and delivery, commonly found in hot water dispensers and similar systems. Please read this manual thoroughly before using the product and retain it for future reference.
2. Proizvod je gotovview
The JIAYIN JYPC-4 is a compact and efficient electromagnetic plunger pump. Key features include:
- Ocijenjeno svtage: AC 100V - 120V, 60Hz, 22W
- Brzina protoka: 750 ±15% cc/min
- Radni tlak: ≥1.5 bar
- Radni medij: Water or non-corrosive liquids
- Materijal: Izdržljiva plastična konstrukcija
- Način vožnje: Elektromagnetski
Slika 1: Kutno view of the JIAYIN JYPC-4 Series electromagnetic plunger pump, showing its compact design and main components.
Slika 2: Krupni plan view of the JIAYIN JYPC-4 pump, highlighting the electrical terminals and the product specification label.
Figure 3: Technical drawing providing detailed dimensions of the JIAYIN JYPC-4 pump in millimeters.
3. Tehničke specifikacije
| Parametar | Vrijednost |
|---|---|
| Marka | JIAYIN |
| Model | JYPC-4 |
| Ocijenjeno svtage | AC 100V - 120V, 60Hz |
| Potrošnja energije | 22 W |
| Brzina protoka | 750 ±15% cc/min |
| Radni tlak | ≥1.5 bar |
| Tip pumpe | Klipna pumpa |
| Pump Shaft Position | Horizontalno |
| Impeller Structure | Closed Impeller |
| Number of Impellers | Samac Stage |
| Neto težina | 137 ±5g (approx. 4.8 oz) |
| Materijal | Plastični |
| Klasa izolacije | H |
| Način vožnje | Elektromagnetski |
| Način povezivanja | Kanila |
| Temperatura okoline | Ta 70℃ (158°F) |
| Temperatura tekućine | Tf 60℃ (140°F) |
| UPC | 607469294553 |
4. Sigurnosne upute
Kako biste spriječili ozljede ili štetu, uvijek se pridržavajte sljedećih sigurnosnih mjera opreza:
- Električna sigurnost: Ensure the pump is connected to a power source matching the specified voltage (AC 100V-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting.
- Kompatibilnost s tekućinom: Use only with water or non-corrosive liquids. Using corrosive fluids can damage the pump and void the warranty.
- Temperaturna ograničenja: Do not exceed the maximum ambient temperature of 70℃ (158°F) or fluid temperature of 60℃ (140°F).
- Ispravna instalacija: Install the pump securely in a horizontal position as specified. Ensure all connections are tight to prevent leaks.
- Izbjegavajte trčanje na suho: Do not operate the pump without fluid, as this can cause severe damage.
- Ventilacija: Osigurajte odgovarajuću ventilaciju oko pumpe kako biste spriječili pregrijavanje.
- Djeca i kućni ljubimci: Keep the pump and its components out of reach of children and pets.
5. Postavljanje i instalacija
Slijedite ove korake za ispravnu instalaciju:
- Montaža: Securely mount the pump in a horizontal position using appropriate fasteners. Refer to Figure 3 for dimensions and mounting points.
- Priključci tekućine: Connect the inlet and outlet tubes to the pump's cannula ports. Ensure a tight fit to prevent leaks. For flow testing, a 13.8-inch silicon tube with an outer diameter of 0.31 inches and an inner diameter of 0.16 inches is recommended for the water inlet port.
- Električni priključak: Connect the pump to a compatible AC 100V-120V, 60Hz power supply. Ensure wiring is done by a qualified professional if you are unsure.
- Premazivanje temeljnim premazom (ako je potrebno): Depending on your system, you may need to prime the pump by ensuring the fluid path is filled with liquid before initial operation to prevent dry running.
6. Operacija
Once installed and connected, operate the pump as follows:
- Uključivanje: Apply power to the pump. The electromagnetic mechanism will activate, initiating the plunger action.
- Monitor protoka: Observe the fluid flow to ensure it is within the specified range of 750 ±15% cc/min and that the working pressure is maintained at or above 1.5 bar.
- Kontinuirani rad: The pump is designed for continuous operation (ED100%).
- Isključivanje: Disconnect power when the pump is not in use or when maintenance is required.
7. Održavanje
Redovito održavanje osigurava optimalne performanse i produžuje vijek trajanja pumpe:
- Čišćenje: Periodically inspect the pump for any external dirt or debris. Clean with a soft, damp tkanina. Nemojte koristiti jake kemikalije.
- Veze: Regularly check all fluid and electrical connections for tightness and signs of wear or corrosion.
- Kvaliteta tekućine: Ensure the working fluid remains clean and free of particles that could clog the pump. If the fluid contains impurities, consider adding a filter to the system.
- Skladištenje: If storing the pump for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
8. Rješavanje problema
Uobičajene probleme i njihova moguća rješenja potražite u donjoj tablici:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Pumpa se ne pokreće | Nema napajanja Netočan svtage Labava električna veza | Provjerite izvor napajanja Provjeri voltage matches pump rating Osigurajte električne veze |
| Low or no fluid flow | Inlet/outlet clogged Air in the system (not primed) Leak in fluid connections Rad na suho | Inspect and clear blockages Napunite pumpu Provjerite i zategnite spojeve Ensure fluid supply is constant |
| Neuobičajena buka tijekom rada | Zrak u sustavu Labava montaža Unutarnja opstrukcija | Ispustite zrak iz sustava Zategnite pričvrsne vijke Inspect for foreign objects (disconnect power first) |
| Curenje iz spojeva | Labavi spojevi Damaged tubing/cannula | Tighten all fluid connections Replace damaged tubing or cannula |
9. Jamstvo i podrška
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Any unauthorized disassembly or modification of the pump will void the warranty.