1. Proizvod je gotovview
The A-Premium 34" Engine Coolant Radiator Assembly is designed to provide efficient engine cooling for compatible vehicles. This unit includes both engine and transmission oil coolers, featuring a 34-inch core width and 32mm core thickness for enhanced cooling performance.
Ključne karakteristike:
- Izravna zamjena: Engineered for a precise fit and easy installation.
- Poboljšano hlađenje: Features a 34-inch core width and 32mm core thickness for superior heat dissipation compared to standard 26mm thickness units.
- Integrated Coolers: Includes both engine and transmission oil coolers.
- Izdržljiva konstrukcija: Made with 100% aluminum for increased structural rigidity, anti-rust, and anti-corrosion properties.
- Non-Leakage Design: Utilizes PA66 plastic end tanks for high temperature and high pressure resistance, preventing leaks.
Vizualni prikazi proizvoda:
Službeni videozapisi proizvoda:
2. Vodič za instalaciju
PAŽNJA: Please use the appropriate shop manual for your specific vehicle to obtain detailed instructions. If you do not have an installation manual or sufficient skills to install this part, it is recommended that you seek help from a qualified mechanic.
General Steps (Consult Vehicle-Specific Manual for Details):
- priprema: Ensure the engine is cool. Disconnect the battery. Drain the existing coolant from the system.
- Uklanjanje starog radijatora: Disconnect all hoses, electrical connections, and mounting hardware from the old radiator. Carefully remove the old radiator from the vehicle.
- Komponente prijenosa: Transfer any necessary components from the old radiator to the new A-Premium radiator, such as rubber grommets or mounting bushings. Ensure all components are securely fitted.
- Ugradnja novog radijatora: Position the new radiator into the vehicle's radiator support. Secure it with the appropriate mounting brackets and bolts.
- Connect Hoses and Coolers: Reconnect all coolant hoses and transmission/engine oil cooler lines. Ensure all connections are tight to prevent leaks. Note: The oil cooler line fittings are self-sealing taper types; Teflon tape or additional thread sealant is not required. Ensure these nuts are tightened properly.
- Dopunjavanje rashladne tekućine: Napunite sustav hlađenja rashladnom tekućinom koju preporučuje proizvođač.
- Ispuštanje zraka: Start the engine and allow it to reach operating temperature. Monitor coolant levels and bleed any trapped air from the system as per your vehicle's service manual.
- Provjerite ima li curenja: After installation and initial operation, thoroughly inspect all connections for any signs of leaks.
3. Operacija
The radiator is a critical component of your vehicle's cooling system. Its primary function is to dissipate excess heat from the engine coolant, preventing overheating and maintaining optimal engine operating temperatures. Coolant circulates through the engine, absorbing heat, and then flows into the radiator where it is cooled by airflow passing through the radiator fins. The integrated transmission and engine oil coolers also help maintain optimal temperatures for these fluids, contributing to overall vehicle performance and longevity.
4. Održavanje
Regular maintenance of your cooling system is essential for the longevity and performance of your vehicle and the A-Premium radiator. Follow your vehicle manufacturer's recommended maintenance schedule.
Opći savjeti za održavanje:
- Provjerite razinu rashladne tekućine: Regularly inspect the coolant level in the reservoir and top up as needed with the correct type of coolant.
- Provjerite ima li curenja: Periodically check the radiator, hoses, and connections for any signs of leaks, cracks, or corrosion. Address any leaks promptly.
- Očistite rebra hladnjaka: Ensure the radiator fins are free from debris (leaves, insects, dirt) that can obstruct airflow and reduce cooling efficiency. Use a soft brush or compressed air to gently clean the fins.
- Ispiranje rashladne tekućine: Adhere to your vehicle's recommended coolant flush intervals to ensure the cooling system remains free of contaminants and corrosion.
- Pregled crijeva: Check radiator hoses for cracks, hardening, or softness, and replace them if necessary.
5. Rješavanje problema
If you experience issues with your cooling system after installing the A-Premium radiator, consider the following common troubleshooting steps:
Uobičajeni problemi i rješenja:
- Curenje rashladne tekućine:
- Labavi spojevi: Re-check all hose clamps and the transmission/engine oil cooler line fittings. Ensure the self-sealing taper nuts are adequately tightened.
- Oštećena crijeva: Inspect hoses for any cuts or cracks. Replace any damaged hoses.
- Oštećenje radijatora: Although the A-Premium radiator is built for durability, inspect for any physical damage that might have occurred during installation or operation.
- Pregrijavanje motora:
- Niska razina rashladne tekućine: Check and top up coolant. Ensure there are no leaks.
- Zrak u sustavu: Bleed the cooling system to remove any trapped air.
- Obstructed Radiator: Clean any debris from the radiator fins.
- Thermostat Malfunction: A faulty thermostat can prevent proper coolant flow. Consult a mechanic if you suspect this issue.
- Cooling Fan Issue: Provjerite da li ventilator za hlađenje ispravno radi.
- Poor Heating (Cabin):
- Low Coolant Level/Air: Ensure coolant is at the correct level and the system is free of air.
- Thermostat Malfunction: A thermostat stuck open can lead to insufficient engine temperature for cabin heating.
Ako koraci za rješavanje problema ne riješe problem, obratite se kvalificiranom automobilskom tehničaru.
6. Specifikacije
| Značajka | Detalj |
|---|---|
| Marka | A-Premium |
| Broj modela | APRAD095 |
| Broj dijela proizvođača | APRAD095 |
| OEM brojevi dijelova | 13029, 2370, CU2370, 15841569, 22840115 |
| Core Width | 34 inča |
| Debljina jezgre | 32 mm |
| Težina artikla | 19.96 funti |
| Dimenzije paketa | 44 x 25 x 6.5 inča |
| Hladnjak ulja | Included (Engine and Transmission Oil Cooler) |
| Materijal | 100% Aluminum Core, PA66 Plastic End Tanks |
7. Kompatibilnost vozila
This A-Premium 34" Engine Coolant Radiator Assembly is compatible with the following vehicles equipped with an automatic transmission:
- Cadillac:
- Escalade: 2002-2014
- Escalade ESV: 2003-2014
- Escalade EXT: 2002-2013
- Chevrolet:
- Avalanche: 2007-2013
- Avalanche 1500: 2002-2006
- Silverado 1500: 1999-2013
- Silverado 1500 Classic: 2007
- Silverado 1500 HD: 2001-2003, 2005-2006
- Silverado 1500 HD Classic: 2007
- Silverado 2500: 1999-2009
- Silverado 2500 HD: 2001-2010
- Silverado 2500 HD Classic: 2007
- Silverado 3500: 2001-2006
- Silverado 3500 Classic: 2007
- Silverado 3500 HD: 2007-2010
- Suburban 1500: 2000-2014
- Suburban 2500: 2000-2013
- Tahoe: 2000-2014
- GMC:
- Sierra 1500: 1999-2013
- Sierra 1500 Classic: 2007
- Sierra 1500 HD: 2001-2003, 2005-2006
- Sierra 1500 HD Classic: 2007
- Sierra 2500: 1999-2004
- Sierra 2500 HD: 2001-2010
- Sierra 2500 HD Classic: 2007
- Sierra 3500: 2001-2006
- Sierra 3500 Classic: 2007
- Sierra 3500 HD: 2007-2010
- Yukon: 2000-2014
- Yukon XL 1500: 2000-2014
- Yukon XL 2500: 2000-2013
- Hummer:
- H2: 2003-2009
Always verify compatibility with your specific vehicle's make, model, year, and engine before ordering.
8. Jamstvo i podrška
For information regarding product warranty, returns, or technical support, please refer to the A-Premium official website or contact their customer service directly. Keep your purchase receipt and product information readily available for any warranty claims or support inquiries.