Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Proizvod je gotovview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Slika 1: Prednja strana view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Ključne značajke

• Weekly Programmable: Allows up to 16 ON/OFF programs per day or week.
• Višenamjenski: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Veliki kapacitet: Podržava 16 Amp / 220 Volt AC loads.
• Wide Voltage Kompatibilnost: Operates with 220V, 230V, 240V AC.
• Ugrađena baterija: Zadržava postavke tijekom nestanka strujetages (Lithium battery type).
• Svestrane primjene: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Specifikacije

4. Instalacija

Važna sigurnosna napomena: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Montaža: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Ožičenje: Refer to the wiring diagram on the back of the unit.
   

   Slika 2: Natrag view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Uključivanje: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Upute za rad

5.1. Funkcije gumba

• SAT: Koristi se za postavljanje trenutnog vremena i dana.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• TJEDAN: Selects the day(s) of the week during time or program setting.
• SAT: Podešava sat tijekom podešavanja vremena ili programa.
• MIN: Podešava minute tijekom podešavanja vremena ili programa.
• PODSJETITI: Recalls or cancels a program setting.
• PRIRUČNIK: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Resetiranje): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Postavljanje trenutnog vremena i dana

1. Pritisnite i držite SAT dugme.
2. Dok drži SAT, pritisnite TJEDAN za postavljanje trenutnog dana (PO, TU, SRI, ČET, PET, SA, NE).
3. Dok drži SAT, pritisnite SAT za postavljanje trenutnog sata.
4. Dok drži SAT, pritisnite MIN za postavljanje trenutne minute.
5. Otpustite SAT gumb za spremanje postavki.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Pritisnite tipku PROG jednom pritisnite tipku. Na zaslonu će se prikazati "1 UKLJUČENO".
2. Pritisnite TJEDAN repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Pritisnite SAT za postavljanje željenog sata uključivanja.
4. Pritisnite MIN za postavljanje željene minute UKLJUČIVANJA.
5. Pritisnite PROG ponovno. Na zaslonu će se prikazati "1 ISKLJUČENO".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Pritisnite PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the SAT dugme.

5.4. Ručno poništavanje

Pritisnite tipku PRIRUČNIK button to cycle through the output modes:

• NA: Output is continuously ON, ignoring programs.
• AUTOMOBIL: Output follows the programmed schedules.
• OFF: Output is continuously OFF, ignoring programs.

Provjerite je li timer uključen AUTO mode for programmed operation.

5.5. Resetiranje timera

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Održavanje

The Sinotimer TM618N-2 requires minimal maintenance.

• Uređaj održavajte čistim i bez prašine. Za čišćenje koristite meku, suhu krpu.
• Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Rješavanje problema

8. Jamstvo i podrška

Za informacije o jamstvu i tehničku podršku, molimo pogledajte dokumentaciju koja je priložena uz kupnju ili se obratite prodavaču. Sačuvajte dokaz o kupnji za slučaj reklamacije.

Manufacturer: Sinotimer