BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Značajke proizvoda

• Integrirani senzor pokreta: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Podesivo vrijeme zadržavanja: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Tri načina rada:
  • AUTO način rada: Light activates when motion is detected in dark conditions.
  • ON način rada: Light remains constantly on.
  • G način rada: Light activates when motion is detected in both daytime and nighttime conditions.
• Tri temperature boje: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ultra-tanak dizajn: Niskoprofesionalnifile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Svestrana instalacija: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Upute za uporabu (ovaj dokument)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Sigurnosne informacije

UPOZORENJE: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Ne pokušavajte modificirati učvršćenje.
• Držite djecu podalje od područja postavljanja.

Postavljanje i instalacija

Slijedite ove korake za ispravnu instalaciju:

1. Pripremite se za instalaciju:
   • Prije pokretanja isključite napajanje na prekidaču.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Ugradite montažni nosač:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Žičani spojevi:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Montirajte rasvjetno tijelo:
   • Pažljivo ugurajte sve žice u razvodnu kutiju.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Vrati snagu: Ponovno uključite napajanje na prekidaču.

Slika 4: Vizualni vodič za postupak instalacije.

Upute za rad

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Odabir načina rada:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTOMOBIL: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • NA: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekundi
   • 120S: 120 sekundi (2 minute)
   • 180S: 180 sekundi (3 minute)

Figure 5: Switches for adjusting hold time and operating modes.

Održavanje

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Čišćenje: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Vijek trajanja LED-a: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Inspekcija: Povremeno provjeravajte uređaj ima li znakova oštećenja ili labavih spojeva. Ako pronađete bilo kakve probleme, isključite napajanje i obratite se kvalificiranom električaru.

Rješavanje problema

Ako naiđete na probleme sa svojom rasvjetnom tijelom, pogledajte sljedeće uobičajene probleme i rješenja:

Tehnički podaci

Jamstvo i podrška

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webstranicu. Sačuvajte račun kao dokaz o kupnji.