Uvod
Welcome to your new RYOBI ONE+ 18V Dual-Port Simultaneous Charger. This charger is designed to efficiently charge two RYOBI ONE+ 18V lithium-ion batteries simultaneously, reducing downtime and enhancing productivity. Please read this manual thoroughly before operation to ensure safe and optimal performance.
Važne sigurnosne informacije
Opća sigurnosna pravila
- Prije upotrebe punjača pročitajte sve upute.
- Ne punite baterije u damp ili vlažnim mjestima.
- Use only RYOBI ONE+ 18V lithium-ion batteries with this charger.
- Ne koristite punjač ako je kabel ili utikač oštećen.
- Držite punjač dalje od izvora topline i izravne sunčeve svjetlosti.
- Tijekom punjenja osigurajte odgovarajuću ventilaciju.
- Isključite punjač iz struje kada ga ne koristite ili prije čišćenja.
Električna sigurnost
- This charger is designed for 120V AC household current only.
- Do not use extension cords unless absolutely necessary. If an extension cord is used, ensure it is properly rated for the charger's power requirements.
- Do not abuse the cord. Never carry the charger by the cord or yank it to disconnect from a receptacle.
Sadržaj paketa
The RYOBI ONE+ 18V Dual-Port Simultaneous Charger (PCG005) package includes:
- 1 x RYOBI 18V ONE+ Dual Port Charger (PCG005)
- 1 x kabel napajanja
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger with power cord, illustrating what is included in the package.
Ključne značajke
- Dual-port punjenje: Charges two RYOBI ONE+ 18V batteries simultaneously.
- Faster Charging Speed: Provides up to 2X faster charging compared to standard chargers.
- Način rada za uštedu energije: Automatically conserves power when not in use.
- Clear LED Indicators: Displays charging status, full charge, and fault conditions.
- Široka kompatibilnost: Works with all RYOBI ONE+ 18V lithium-ion batteries.
- Ugrađena zaštita: Includes Smart Battery Detection, Overcharge & Thermal Protection, Short Circuit Protection, and LED Fault Indicators.
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger highlighting its key features such as dual-port charging and LED indicators.
Upute za postavljanje
Raspakiranje
Carefully remove the charger and all accessories from the packaging. Inspect the unit for any damage that may have occurred during shipping. Do not discard packaging until you are satisfied with the product.
Spajanje na napajanje
- Plug the power cord into the charger's power input port.
- Plug the other end of the power cord into a standard 120V AC electrical outlet.
- The charger's LED indicators may briefly illuminate to confirm power connection.
Upute za rad
Punjenje baterije
- Provjerite je li punjač priključen na izvor napajanja.
- Align the ribs on the battery with the grooves in the charger port.
- Slide the battery onto the charger until it clicks into place. You can insert one or two batteries at a time.
- The charger's LED indicators will show the charging status.
Image: A hand inserting a RYOBI ONE+ 18V battery into the charger, demonstrating one-handed battery insertion.
Razumijevanje LED indikatora
The charger features LED indicators for each charging port to communicate battery status:
- Stalno zeleno: Baterija je potpuno napunjena.
- Trepere zeleno: Baterija se puni.
- Čvrsto crveno: Battery is too hot or too cold to charge. The charger will wait until the battery reaches an acceptable temperature before charging.
- Trepće crveno: Battery is defective or there is a fault with the charger. Remove the battery and try a different one. If the issue persists, contact customer support.
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger with two batteries inserted, showing the green LED indicators for charging status.
Removing a Battery
To remove a battery, press the release latches on the battery and slide it off the charger.
Održavanje
Čišćenje
Unplug the charger before cleaning. Use a clean, damp cloth to wipe the exterior of the charger. Do not use strong detergents or solvents. Keep the charging ports free of debris.
Skladištenje
Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure batteries are removed from the charger before storage.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Punjač ne radi / Nema LED indikatora | Nema napajanja za punjač. | Ensure the power cord is securely plugged into both the charger and a working electrical outlet. Check the circuit breaker. |
| Battery not charging (Solid Red LED) | Baterija je prevruća ili prehladna. | Allow the battery to reach room temperature before attempting to charge again. |
| Battery not charging (Flashing Red LED) | Defective battery or charger fault. | Remove the battery and try charging a different, known-good battery. If the issue persists with multiple batteries, the charger may be faulty. Contact customer support. |
| Sporo punjenje | Environmental factors or battery condition. | Ensure the charger is in a well-ventilated area. Older or heavily used batteries may charge slower. |
Tehnički podaci
- Marka: RYOBI
- Model: PCG005
- Ulazni voltage: 120 V AC
- Izlazni voltage: 26.25 volti istosmjerne struje
- Trenutna ocjena: 4 A
- Broj priključaka: 2
- Kompatibilni uređaji: RYOBI ONE+ 18V lithium-ion batteries
- Sigurnosna potvrda: UL, CSA, or ETL compliant
Jamstvo i podrška
RYOBI products are manufactured to high-quality standards. For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official RYOBI website. For technical assistance or customer support, please contact RYOBI customer service.