AURA Livac 114R Upute za uporabu usisavača

1. Uvod

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.

2. Sigurnosne upute

WARNING: To reduce the risk of fire, electric shock, or injury, read and follow all instructions carefully.

• Always disconnect the power cord from the electrical outlet before servicing.
• Do not use the appliance on wet surfaces when operating in dry mode.
• Ne usisavajte zapaljive ili zapaljive tekućine, poput benzina, niti ih koristite u područjima gdje bi mogle biti prisutne.
• Ne skupljajte ništa što gori ili se dimi, poput cigareta, šibica ili vrućeg pepela.
• Držite kosu, široku odjeću, prste i sve dijelove tijela dalje od otvora i pokretnih dijelova.
• Koristite samo kako je opisano u ovom priručniku. Koristite samo nastavke koje preporučuje proizvođač.
• Ne koristite s oštećenim kabelom ili utikačem. Ako uređaj ne radi kako bi trebao, ako je pao, oštećen, ostavljen vani ili je pao u vodu, vratite ga u servisni centar.
• Nemojte vući ili nositi za kabel, koristiti kabel kao ručku, zatvarati vrata na kabelu ili povlačiti kabel oko oštrih rubova ili uglova. Ne prelazite uređajem preko kabela. Držite kabel dalje od zagrijanih površina.
• Ne isključujte utikač povlačenjem za kabel. Za isključivanje, uhvatite utikač, a ne kabel.
• Nemojte rukovati utikačem ili uređajem mokrim rukama.
• Isključite sve kontrole prije isključivanja.

3. Komponente proizvoda

The AURA Livac 114R Suction Machine includes the following main components:

• Main Unit (Motor housing, dust/water container)
• Fleksibilno crijevo
• Produžni štapići
• Mlaznica za pranje tepiha
• Filter za prašinu
• Water Tank (for carpet washing solution)
• Kabel za napajanje

Slika 1: Gotovoview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.

4. Postavljanje i sastavljanje

4.1 Raspakiranje

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.

4.2 Pričvršćivanje fleksibilnog crijeva

1. Locate the suction inlet on the main unit.
2. Insert the flexible hose connector firmly into the inlet until it clicks into place.

4.3 Attaching Extension Wands and Nozzles

1. Connect the desired number of extension wands to the end of the flexible hose.
2. Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.

4.4 Preparing for Carpet Washing

1. Open the extra basin (3.5 L capacity) for the cleaning solution.
2. Ispunite basin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
3. Ensure the pump connection is secure.

5. Upute za rad

5.1 Dry Vacuuming (Dust Suction)

1. Ensure the dust filter is correctly installed in the 5 L dust container.
2. Connect the flexible hose and appropriate dry vacuuming nozzle.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the power button (usually green or marked with 'I') to start the motor.
5. Pomičite mlaznicu preko površine koju čistite.
6. After use, press the power button to turn off the machine and unplug it.

5.2 Wet Vacuuming (Water Suction)

CAUTION: Remove the dust filter before wet vacuuming to prevent damage.

1. Uklonite filter za prašinu.
2. Ensure the 6 L waste basin is empty and properly secured.
3. Connect the flexible hose and a suitable wet vacuuming nozzle.
4. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
5. Pritisnite gumb za uključivanje kako biste pokrenuli motor.
6. Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
7. After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin odmah.

5.3 Carpet Washing Function

1. Prepare the cleaning solution in the 3.5 L extra basin kako je opisano u Odjeljku 4.4.
2. Attach the carpet washing nozzle and ensure the spray hose is connected.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the main power button (for suction) and the pump power button (for spraying solution).
5. Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
6. Immediately move the nozzle over the wet area to suction up the dirty solution.
7. Work in small sections, overlapping slightly.
8. After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
9. Turn off both power buttons and unplug the machine. Empty and clean all basins.

5.4 Funkcija ventilatora

1. Pronađite izlaz za ventilator na glavnoj jedinici (obično nasuprot usisnom ulazu).
2. Attach the flexible hose to the blower outlet.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Pritisnite gumb za uključivanje kako biste aktivirali puhalo.
5. Direct the airflow as needed for blowing dust or drying surfaces.
6. After use, press the power button to turn off the machine and unplug it.

6. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.

6.1 Emptying and Cleaning the Dust/Waste Basin

• After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
• Isprati basin temeljito isperite čistom vodom i ostavite da se potpuno osuši na zraku prije ponovnog sastavljanja.

6.2 Čišćenje filtera za prašinu

• For dry vacuuming, regularly check and clean the dust filter.
• Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
• Zamijenite filter ako je oštećen ili prekomjerno istrošen.

6.3 Cleaning the Extra Basin (Solution Tank)

• After carpet washing, empty any remaining cleaning solution.
• Rinse the 3.5 L extra basin with clean water to prevent residue buildup.

6.4 Cleaning Hoses and Nozzles

• Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
• Ensure they are dry before storage.

6.5 Skladištenje

Store the appliance and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Rješavanje problema

8. Specifikacije

• Model: Livac 114R
• Marka: AURA
• Maks. Snaga motora: 2000 W
• Usisna snaga: 1950 mmH2O
• Voltage: 220 - 240 V AC
• Frekvencija: 50/60 Hz
• Protok zraka: 200 m³/h
• Kapacitet usisavanja: 1.5 L/s
• Snaga pumpe: 26 W
• Tlak pumpe: 2.5 bara
• Waste Basin Volumen: 6 L
• Kapacitet spremnika za prašinu: 5 L
• Extra Basin Volume (Solution Tank): 3.5 L
• Težina artikla: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
• Posebne karakteristike: Dry, Wet, Carpet Washing, Blower Function

9. Jamstvo i podrška

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA webstranicu. Sačuvajte račun kao dokaz o kupnji.

For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.