Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.

Slika 1: Prednja strana view of the Barska AX13744 Biometric Safe.

2. Sigurnosne informacije

• Always keep emergency keys in a secure location away from the safe. Do not store them inside the safe.
• Osigurajte da je sef sigurno montiran kako biste spriječili neovlašteno uklanjanje.
• Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
• Regularly check battery levels to ensure proper function of the electronic lock.
• Keep the safe door closed and locked when not in use.

3. Sadržaj paketa

Provjerite jesu li sve dolje navedene stavke uključene u vaš paket:

• Barska AX13744 Safe Unit
• 2 Adjustable Shelves with Shelf Brackets
• 4 AA baterije
• Mounting Hardware (bolts, anchors)
• Set of Emergency Back-Up Keys (2 keys)

Slika 2: Uključene komponente i dimenzije proizvoda.

4. Postavljanje

4.1. Ugradnja baterije

1. Pronađite odjeljak za baterije na unutarnjoj strani vrata sefa.
2. Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
3. Čvrsto zatvorite poklopac odjeljka za baterije.

4.2. Initial Access and Opening

Upon first use, open the safe using the emergency keys:

1. Locate the keyhole cover on the electronic keypad.
2. Remove the cover to expose the keyhole.
3. Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
4. Once open, you can proceed with programming fingerprints and PIN codes.

4.3. Montiranje sefa

The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.

1. Choose a suitable location for the safe, ensuring a stable surface.
2. Mark the pre-drilled mounting points on the floor through the safe's base.
3. Drill pilot holes into the floor at the marked locations.
4. Position the safe over the holes and secure it using the provided bolts and anchors.
5. Ensure the safe is firmly attached and does not wobble.

Slika 3: Unutrašnjost view of the safe with adjustable shelves.

5. Upute za rad

5.1. Biometric Fingerprint Access

The safe can store up to 160 distinct fingerprints.

1. To program a fingerprint, press the programming button located inside the safe.
2. Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
3. Repeat the scan multiple times for better accuracy.
4. To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.

5.2. Keypad PIN Code Access

The safe supports up to 2 unique PIN codes.

1. To program a PIN code, press the programming button inside the safe.
2. Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
3. Repeat the process to confirm the PIN code.
4. To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.

5.3. Pristup ključem u slučaju nužde

In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.

Figure 4: Emergency access using a 9V battery (not included).

5.4. Sustav alarma

• Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
• Način zaključavanja: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
• Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.

5.5. Unutarnje LED svjetlo

The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.

5.6. Prilagodljive police

The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.

6. Održavanje

• Čišćenje: Obrišite vanjski dio sefa mekom,amp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili otapala.
• Zamjena baterije: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
• Mehanizam zaključavanja: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.

7. Rješavanje problema

8. Specifikacije

Figure 5: Fire resistance features of the safe.

9. Jamstvo i podrška

For warranty information, please refer to the manufacturer's official website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their webmjesto.

Često postavljana pitanja:

• Are replacement parts or accessories available for this product if needed? Posjetite naš website to request keys or replacement parts.